|
M39012/25-0006
D#: M39012/25-0006
|
Pasternack Enterprises
|
Key Specifications, Connector Series: BNC, Connector Gender: Male, Chain Option: Chain. BNC Male Open Circuit Connector Cap With 2.25 Inch Chain. Pasternack’s M39012/25-0006 RF coaxial connector cap (which can also be referred to as an RF connector dust cap in some cases) is available in a non-shorting design. This non-shorting RF connector cap has a BNC connector series and a male gender. Our BNC male non-shorting connector cap is manufactured with a brass body material and silver body plating. Our silver-plated dust cap comes with a 2.25-inch long chain to prevent loss and misplacement. Our M39012/25-0006 dust cap has a length of 0.67 inches, a width of 3.9 inches, and a height of 0.6 inches. These RF connector dust caps are essential for precision connectors to protect them from dust, corrosion, and other potential damage. Additional dimensions and specifications for this BNC male connector cap are on our downloadable PDF datasheet above. Our coaxial non-shorting protective dust cap is just one part of over one million RF components supplied by Pasternack. The M39012/25-0006 connector dust cap is in stock and will ship on the same business day as purchased. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF connector dust cap for your requirements.
Min Qty:
1
Package Multiple:
1
|
32
|
- 1 $54.5900
- 25 $51.8600
- 50 $49.1300
- 100 $46.9500
- Show All
|
Buy Now
|
|
PE71S5000
D#: PE71S5000
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
5
|
- 1 $4,880.0000
- 5 $4,684.8000
- 10 $4,489.6000
|
Buy Now
|
|
PE70A5000
D#: PE70A5000
|
Pasternack Enterprises
|
Key Specifications, Design: TTL Controlled, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 0.1 Watt, VSWR Maximum: 2.2:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 60 dB, Switching Time: 50,000 ns. 60 dB With 8 Bit Programmable TTL Controlled Attenuator, SMA Female To SMA Female, 0.25 dB Steps From 30 MHz To 6 GHz. PE70A5000 is a programmable attenuator from Pasternack. Our SMA attenuator is a programmable step attenuator design. This 50 Ohm adjustable attenuator is precision manufactured to RF and microwave industry specifications. The Pasternack programmable attenuator has a female gender for connector 1 and a SMA female for connector 2. PE70A5000 programmable step attenuator has a minimum attenuation of 0 dB and a maximum attenuation of 60 dB with 8dB step sizes. Our programmable RF attenuator has frequency range of 30 MHz to 6 GHz and a maximum VSWR of 2.2. This adjustable SMA attenuator is rated to 0.1 Watt at the stated attenuation. Our attenuator PE70A5000 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This RF programmable attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
Min Qty:
1
Package Multiple:
1
|
3
|
- 1 $7,910.0000
- 5 $7,593.6000
- 10 $7,277.2000
|
Buy Now
|
|
PE88D25000
D#: PE88D25000
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $1,620.0000
- 5 $1,555.2000
- 10 $1,490.4000
- 25 $1,425.6000
- Show All
|
Buy Now
|
|
PE88D15000
D#: PE88D15000
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $1,670.0000
- 5 $1,603.2000
- 10 $1,536.4000
- 25 $1,469.6000
- Show All
|
Buy Now
|
|
PEWAD5000
D#: PEWAD5000
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $754.9900
- 5 $739.8900
- 10 $724.7900
|
Buy Now
|
|
PE3C5000-6
D#: PE3C5000-6
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Female Bulkhead to SMP Female Right Angle Cable 6 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female bulkhead to SMP female right angle cable 6 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMP female right angle cable 6 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a right angle SMP cable connection on the other. Our SMA to right angle SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C5000-6 can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5000-6 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our bulkhead SMA female to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA jack to SMP jack cable assembly PE3C5000-6 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C5000-6 can also be used in the other direction and will be a right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $105.9900
- 25 $100.6900
- 50 $95.3900
- 100 $91.1500
- Show All
|
Buy Now
|
|
PE3C5000-24
D#: PE3C5000-24
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Female Bulkhead to SMP Female Right Angle Cable 24 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female bulkhead to SMP female right angle cable 24 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMP female right angle cable 24 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a right angle SMP cable connection on the other. Our SMA to right angle SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C5000-24 can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5000-24 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our bulkhead SMA female to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA jack to SMP jack cable assembly PE3C5000-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C5000-24 can also be used in the other direction and will be a right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $126.9900
- 25 $120.6400
- 50 $114.2900
- 100 $109.2100
- Show All
|
Buy Now
|
|
PE3C5000-18
D#: PE3C5000-18
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Female Bulkhead to SMP Female Right Angle Cable 18 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female bulkhead to SMP female right angle cable 18 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMP female right angle cable 18 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a right angle SMP cable connection on the other. Our SMA to right angle SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C5000-18 can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5000-18 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our bulkhead SMA female to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA jack to SMP jack cable assembly PE3C5000-18 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C5000-18 can also be used in the other direction and will be a right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $119.9900
- 25 $113.9900
- 50 $107.9900
- 100 $103.1900
- Show All
|
Buy Now
|
|
PE3C5000-9
D#: PE3C5000-9
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMA Female Bulkhead to SMP Female Right Angle Cable 9 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female bulkhead to SMP female right angle cable 9 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMP female right angle cable 9 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a right angle SMP cable connection on the other. Our SMA to right angle SMP cable assembly has a female gender on end 1 and a female on end 2. PE3C5000-9 can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C5000-9 RF cable has a FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our bulkhead SMA female to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA jack to SMP jack cable assembly PE3C5000-9 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C5000-9 can also be used in the other direction and will be a right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $109.9900
- 25 $104.4900
- 50 $98.9900
- 100 $94.5900
- Show All
|
Buy Now
|
Microchip Technology Inc 
TE Connectivity 
Rochester Electronics 
SiTime Corporation 
Sager 
Master Electronics 
Flip Electronics 
PEI Genesis 
ComSIT USA 
North Star Micro Electronics 
Bisco Industries 
Richardson RFPD 
Chip-Germany GmbH 
Microchip USA 
Hermes Engineering 
PUI 
Quest Components 
ICMILES Electronics Ltd 
Kepictronics Inc. 
Kurrent Technology 
IBS Electronics 
L-com US 
ICHOME Technology 
Components at Service GmbH 
Powell Electronics 
Bristol Electronics 
Allelco Limited 
Component Stockers 
Waytek, Inc. 
Chipskey Technology Co Ltd 
Dynamic Solutions GmbH 
R&J Components 
DST International Group (HK) Limited 
PB Signal 
C Plus Electronics 
Time Way Electronics Limited 
Interstate Connecting Components 
Sensible Micro Corporation 
Component Search 
NAC 
Axis Part Limited 
DB Roberts 
Unikey Electronic Pte Ltd 
New Strength Electronic Co., Limited 
LIBRA Elektronik GmbH 
RG Elektrotechnologie GmbH 
Cytech Systems Limited 
Shengyu Electronics Technology Limited 
New Advantage Corporation
NexGen Digital
Pasternack Enterprises US 
Silitech Components Inc. 
Sierra IC 
Tedss 
GlobalTek Components 
LCSC 
Unicom Electronics 
Sense Electronic Company Limited 
Futuretech Components Ltd 
ICHOT TECHNOLOGY LIMITED 
IC Components Limited 
Rutronik 
Chip Stock 
Greenchips 
MountainView Components Inc. 
Perfect Parts Corporation 
Venkel Ltd. 
Neutron USA 
Win Source Electronics 
Vyrian 
YIC International Co., Limited