|
PE3W10002-24
D#: PE3W10002-24
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Female to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly SMA female to SMA male right angle low loss cable 24 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA female to SMA male right angle low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This SMA to SMA cable is a female to male coax assembly, PE3W10002-24, can also be known as a low loss SMA jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W10002-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10002-24 can also be used in the other direction and will be right angle SMA male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA male right angle low loss cable 24 inch length using LMR-100 coax.
Min Qty:
1
Package Multiple:
1
|
988
|
- 1 $60.9900
- 25 $57.9400
- 50 $54.8900
- 100 $52.4500
- Show All
|
Buy Now
|
|
PE3W10002-200CM
D#: PE3W10002-200CM
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Female to SMA Male Right Angle Low Loss Cable 200 cm Length Using LMR-100 Coax., Radio frequency assembly SMA female to SMA male right angle low loss cable 200 cm length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA female to SMA male right angle low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This SMA to SMA cable is a female to male coax assembly, PE3W10002-200CM, can also be known as a low loss SMA jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA plug cable assembly PE3W10002-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10002-200CM can also be used in the other direction and will be right angle SMA male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA male right angle low loss cable 200 cm length using LMR-100 coax.
Min Qty:
1
Package Multiple:
1
|
988
|
- 1 $65.9900
- 25 $62.6900
- 50 $59.3900
- 100 $56.7500
- Show All
|
Buy Now
|
|
PE3M0002-24
D#: PE3M0002-24
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 24 inches. MIL-DTL-17 BNC Male to N Male Cable 24 Inch Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 BNC male to N male cable 24 inch length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to N male cable 24 inch length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0014 BNC to M39012/01-0503 type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0014 BNC cable connection on one end and M39012/01-0503 N type cable connection on the other. Our M39012/16-0014 BNC to M39012/01-0503 type N cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0014 BNC to M39012/01-0503 type N cable is a male to male coax assembly, PE3M0002-24, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0014 BNC plug to M39012/01-0503 N type plug cable assembly and will be shipped same-day as it is purchased. M39012/16-0014 BNC plug to M39012/01-0503 type N plug cable assembly PE3M0002-24 is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/16-0014 BNC cable assembly is manufactured with M39012/16-0014 BNC to M39012/01-0503 type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 4 GHz maximum frequency M39012/16-0014 BNC male to M39012/01-0503 type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0002-24 can also be used in the other direction and will be M39012/01-0503 N type male to M39012/16-0014 BNC male cable assembly if the opposite connectivity is required. M39012/16-0014 BNC plug to M39012/01-0503 type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0014 BNC to M39012/01-0503 type N cable assembly for quick shipment worldwide. Variations of M39012/16-0014 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to N male cable 24 inch length using M17/60-RG142 coax.
Min Qty:
1
Package Multiple:
1
|
28
|
- 1 $191.9900
- 25 $182.3900
- 50 $172.7900
|
Buy Now
|
|
PE3M0002-200CM
D#: PE3M0002-200CM
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. MIL-DTL-17 BNC Male to N Male Cable 200 cm Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 BNC male to N male cable 200 cm length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to N male cable 200 cm length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0014 BNC to M39012/01-0503 N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0014 BNC cable connection on one end and M39012/01-0503 type N cable connection on the other. Our M39012/16-0014 BNC to M39012/01-0503 type N cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0014 BNC to M39012/01-0503 type N cable is a male to male coax assembly, PE3M0002-200CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0014 BNC plug to M39012/01-0503 type N plug cable assembly and will be shipped same-day as it is purchased. M39012/16-0014 BNC plug to M39012/01-0503 N type plug cable assembly PE3M0002-200CM is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/16-0014 BNC cable assembly is manufactured with M39012/16-0014 BNC to M39012/01-0503 N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 4 GHz maximum frequency M39012/16-0014 BNC male to M39012/01-0503 type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0002-200CM can also be used in the other direction and will be M39012/01-0503 type N male to M39012/16-0014 BNC male cable assembly if the opposite connectivity is required. M39012/16-0014 BNC plug to M39012/01-0503 type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0014 BNC to M39012/01-0503 N type cable assembly for quick shipment worldwide. Variations of M39012/16-0014 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to N male cable 200 cm length using M17/60-RG142 coax.
Min Qty:
1
Package Multiple:
1
|
28
|
- 1 $225.9900
- 25 $214.6900
- 50 $203.3900
|
Buy Now
|
|
PE3C100022
D#: PE3C100022
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: 1.0mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.0mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm. 1.0mm Male to 1.0mm Female Armored Low Loss Test Cable., Radio frequency assembly 1.0mm male to 1.0mm female armored low loss test cable from Pasternack is part of the largest selection of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0mm male to 1.0mm female armored low loss test cable, like our other Pasternack coaxial cable assemblies, will ship the same day. Custom versions of these RF cable assemblies can be built and shipped within two weeks. Custom cable assembly lengths can be obtained by contacting a sales representative. RF testing can also be performed to document the electrical performance of your cable assembly. The Pasternack RF coax low loss test cable assembly is built with a 1.0mm cable connection on one end and a 1.0mm cable connection on the other. Our low loss test 1.0mm to 1.0mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100022 can also be known as a low loss test 1.0mm plug to 1.0mm jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5 inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. Our PE3C100022 RF cable has a FEP jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has an in-series connection. The Pasternack flexible 1.0mm cable assembly is manufactured with 1.0mm to 1.0mm cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. PE3C100022 can also be used in the other direction and will be a 1.0mm female to 1.0mm male cable assembly if the opposite connectivity is required. Low loss test 1.0mm male to 1.0mm female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0mm to 1.0mm cable assembly for quick shipment worldwide. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0mm low loss test RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
8
|
|
Buy Now
|
|
PE3C100022-4
D#: PE3C100022-4
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: 1.0mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.0mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 4 inches. 1.0mm Male to 1.0mm Female Armored Low Loss Test Cable 4 Inch Length., Radio frequency assembly 1.0mm male to 1.0mm female armored low loss test cable 4 inch length from Pasternack is part of the largest selection of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0mm male to 1.0mm female armored low loss test cable 4 inch length, like our other Pasternack coaxial cable assemblies, will ship the same day. Custom versions of these RF cable assemblies can be built and shipped within two weeks. Custom cable assembly lengths can be obtained by contacting a sales representative. RF testing can also be performed to document the electrical performance of your cable assembly. The Pasternack RF coax low loss test cable assembly is built with a 1.0mm cable connection on one end and a 1.0mm cable connection on the other. Our low loss test 1.0mm to 1.0mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100022-4 can also be known as a low loss test 1.0mm plug to 1.0mm jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5 inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. Our PE3C100022-4 RF cable has a FEP jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has an in-series connection. The Pasternack flexible 1.0mm cable assembly is manufactured with 1.0mm to 1.0mm cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. PE3C100022-4 can also be used in the other direction and will be a 1.0mm female to 1.0mm male cable assembly if the opposite connectivity is required. Low loss test 1.0mm male to 1.0mm female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0mm to 1.0mm cable assembly for quick shipment worldwide. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0mm low loss test RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
4
|
- 1 $4,120.0000
- 10 $4,037.6000
- 25 $3,955.2000
- 100 $3,872.8000
- Show All
|
Buy Now
|
|
PE3C100022-6
D#: PE3C100022-6
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: 1.0mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.0mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. 1.0mm Male to 1.0mm Female Armored Low Loss Test Cable 6 Inch Length., Radio frequency assembly 1.0mm male to 1.0mm female armored low loss test cable 6 inch length from Pasternack is part of the largest selection of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0mm male to 1.0mm female armored low loss test cable 6 inch length, like our other Pasternack coaxial cable assemblies, will ship the same day. Custom versions of these RF cable assemblies can be built and shipped within two weeks. Custom cable assembly lengths can be obtained by contacting a sales representative. RF testing can also be performed to document the electrical performance of your cable assembly. The Pasternack RF coax low loss test cable assembly is built with a 1.0mm cable connection on one end and a 1.0mm cable connection on the other. Our low loss test 1.0mm to 1.0mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100022-6 can also be known as a low loss test 1.0mm plug to 1.0mm jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5 inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. Our PE3C100022-6 RF cable has a FEP jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has an in-series connection. The Pasternack flexible 1.0mm cable assembly is manufactured with 1.0mm to 1.0mm cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. PE3C100022-6 can also be used in the other direction and will be a 1.0mm female to 1.0mm male cable assembly if the opposite connectivity is required. Low loss test 1.0mm male to 1.0mm female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0mm to 1.0mm cable assembly for quick shipment worldwide. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0mm low loss test RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
3
|
- 1 $4,200.0000
- 10 $4,116.0000
- 25 $4,032.0000
- 100 $3,948.0000
- Show All
|
Buy Now
|
|
PE3C100022-12
D#: PE3C100022-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: 1.0mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.0mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.0mm Male to 1.0mm Female Armored Low Loss Test Cable 12 Inch Length., Radio frequency assembly 1.0mm male to 1.0mm female armored low loss test cable 12 inch length from Pasternack is part of the largest selection of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.0mm male to 1.0mm female armored low loss test cable 12 inch length, like our other Pasternack coaxial cable assemblies, will ship the same day. Custom versions of these RF cable assemblies can be built and shipped within two weeks. Custom cable assembly lengths can be obtained by contacting a sales representative. RF testing can also be performed to document the electrical performance of your cable assembly. The Pasternack RF coax low loss test cable assembly is built with a 1.0mm cable connection on one end and a 1.0mm cable connection on the other. Our low loss test 1.0mm to 1.0mm cable assembly has a male gender on end 1 and a female on end 2. PE3C100022-12 can also be known as a low loss test 1.0mm plug to 1.0mm jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5 inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. Our PE3C100022-12 RF cable has a FEP jacket. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has an in-series connection. The Pasternack flexible 1.0mm cable assembly is manufactured with 1.0mm to 1.0mm cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss test RF cable are available on our downloadable PDF datasheet. PE3C100022-12 can also be used in the other direction and will be a 1.0mm female to 1.0mm male cable assembly if the opposite connectivity is required. Low loss test 1.0mm male to 1.0mm female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.0mm to 1.0mm cable assembly for quick shipment worldwide. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.0mm low loss test RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $4,440.0000
- 10 $4,351.2000
- 25 $4,262.4000
- 100 $4,173.6000
- Show All
|
Buy Now
|
|
PE3W00022
D#: PE3W00022
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0/2.3, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. 10-32 Male to 1.0/2.3 Jack Bulkhead Cable Using LMR-100 Coax. PE3W00022 is a 10-32 male to 1.0/2.3 jack bulkhead cable using LMR-100A coax. This Pasternack 10-32 male to 1.0/2.3 jack bulkhead cable assembly uses a 50 Ohm 10-32 for connector 1 and a 50 Ohm 1.0/2.3 for connector 2. Our male 10-32 to jack 1.0/2.3 bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00022 10-32 male to 1.0/2.3 jack bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W00022LF/HS
D#: PE3W00022LF/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: 1.0/2.3, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 10-32, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. 1.0/2.3 Jack Bulkhead to 10-32 Male Cable Using LMR-100 Coax with HeatShrink, LF Solder. PE3W00022LF/HS is a 1.0/2.3 jack bulkhead to 10-32 male cable using LMR-100A coax. This Pasternack 1.0/2.3 jack bulkhead to 10-32 male cable assembly uses a 50 Ohm 1.0/2.3 for connector 1 and a 50 Ohm 10-32 for connector 2. Our jack 1.0/2.3 bulkhead to male 10-32 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00022LF/HS 1.0/2.3 jack bulkhead to 10-32 male cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
Rochester Electronics 
TE Connectivity 
SiTime Corporation 
Master Electronics 
Flip Electronics 
Kurrent Technology 
North Star Micro Electronics 
Bristol Electronics 
ICMILES Electronics Ltd 
Waytek, Inc. 
Dynamic Solutions GmbH 
PEI Genesis 
C Plus Electronics 
Microchip USA 
NAC 
IBS Electronics 
Time Way Electronics Limited 
Sensible Micro Corporation 
DB Roberts 
Bisco Industries 
Sager 
Component Stockers 
ComSIT USA 
ICHOME Technology 
Kepictronics Inc. 
Hermes Engineering 
Chip-Germany GmbH 
Allelco Limited 
Interstate Connecting Components 
L-com US 
Richardson RFPD 
Powell Electronics 
Futuretech Components Ltd 
Pasternack Enterprises US 
Chip Stock 
NexGen Digital
Perfect Parts Corporation 
MountainView Components Inc. 
IC Components Limited 
LIBRA Elektronik GmbH 
Avnet Silica 
Neutron USA 
New Advantage Corporation
Vyrian 
Win Source Electronics 
Unicom Electronics 
Sierra IC 
LCSC 
Rutronik 
Silitech Components Inc. 
Shengyu Electronics Technology Limited 
EBV Elektronik 
Avnet Abacus 
New Strength Electronic Co., Limited 
R&J Components 
Tedss 
YIC International Co., Limited 
GlobalTek Components 
Unibetter Technology Co., Ltd 
Cytech Systems Limited 
Greenchips 
Sense Electronic Company Limited