|
PE3CA1000-6
D#: PE3CA1000-6
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Female Bulkhead to UMCX 2.5 Plug Cable 6 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly SMA female bulkhead to UMCX 2.5 plug cable 6 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to UMCX 2.5 plug cable 6 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and UMCX 2.5 cable connection on the other. Our SMA to UMCX 2.5 cable assemblies have a female gender on end 1 and plug on end 2. This SMA to UMCX 2.5 cable is a female to plug coax assembly, PE3CA1000-6, can also be known as a SMA jack to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. SMA jack to UMCX 2.5 male cable assembly PE3CA1000-6 is built with 0.81mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA female bulkhead to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1000-6 can also be used in the other direction and will be UMCX 2.5 plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to UMCX 2.5 plug cable 6 inch length using 0.81mm coax, RoHS.
Min Qty:
1
Package Multiple:
1
|
66
|
- 1 $18.3900
- 25 $17.4700
- 50 $16.5500
- 100 $15.8200
- Show All
|
Buy Now
|
|
PE7000-6
D#: PE7000-6
|
Pasternack Enterprises
|
Key Specifications, Design: Fixed, Maximum Frequency: 2 GHz, Impedance: 50 Ohm, Power Maximum: 1 Watt, VSWR Maximum: 1.2:1, Attenuation: 6 dB, Connector Series 1: BNC, Connector Gender 1: Male, Connector Series 2: BNC, Connector Gender 2: Female, Body Material: Brass, Body Plating: Nickel. 6 dB Fixed Attenuator, BNC Male to BNC Female Brass Nickel Body Rated to 1 Watt Up to 2 GHz. PE7000-6 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This BNC attenuator has a male gender on side 1 and a BNC female connector on side 2. The Pasternack PE7000-6 6 dB attenuator is rated for up to 2 GHz. Our microwave attenuator is rated to 1 Watts at the stated attenuation value. Our fixed RF attenuator PE7000-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
Min Qty:
1
Package Multiple:
1
|
61
|
- 1 $74.9900
- 25 $71.2400
- 50 $67.4900
- 100 $64.4900
- Show All
|
Buy Now
|
|
PE40006
D#: PE40006
|
Pasternack Enterprises
|
Key Specifications, Polarity: Standard, Connector Series: BNC, Connector Gender: Female, Impedance: 75 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 12 GHz, Interface Type 1: Thru Hole. 12G SDI 75 Ohm BNC Female Connector Solder Attachment Thru Hole PCB. PE40006 BNC female pcb connector has an interface type of BNC female thru hole and a 75 Ohm impedance. Pasternack BNC female connector uses shield/contact solder as an attachment method. Our female BNC pcb connector provides a minimum frequency of DC and a maximum frequency of 12 GHz. The Pasternack BNC female pcb connector has a PTFE dielectric type. The Pasternack BNC pcb connector has a brass body with nickel plating. Our PE40006 BNC connector uses brass contact and a nickel plating material. This BNC female pcb RF connector is REACH compliant. This Pasternack female BNC connector will ship the same day as purchased. Our BNC female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BNC connector cable assemblies that will ship the same day as well.
Min Qty:
1
Package Multiple:
1
|
47
|
- 1 $8.0900
- 25 $7.6900
- 50 $7.2800
- 100 $6.9600
- Show All
|
Buy Now
|
|
PE910006
D#: PE910006
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: BMMA, Connector Gender 1: Female, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 18 GHz, Adapter Body Style: Straight, Connector Body Material 1: Passivated Stainless Steel, Connector Mount Method 2: 2 Hole Flange, Connector Body Material 2: Passivated Stainless Steel. BMMA Female to SMA Female 2 Hole Flange Mount Adapter, 0.434 inch Hole Spacing. The BMMA to SMA adapter PE910006 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance and a maximum VSWR of 1.3:1. This RF adapter has a female to female gender configuration, which provides easier connections in tighter spaces. Our BMMA to SMA 2 hole flange adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 18 GHz. This BMMA female to SMA 2 hole flange female adapter is one of the many RF components that ship the same business day as they are ordered. The PE910006 female BMMA to female SMA adapter has a straight body. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. Our adapter has a maximum insertion loss of 0.424 dB. This RF adapter has a 0.97-inch length, 0.3-inch width, and 0.02 lbs weight. The PE910006 adapter from Pasternack is made from a passivated stainless steel connector body and has a brass center contact. Our BMMA female to SMA female 2 hole flange radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This RF adapter has an operating temperature range of -65 to 165 degrees C. Additional dimensions and specifications for this adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of BMMA to SMA 2 hole flange radio frequency adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 18 GHz RF adapter that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
33
|
- 1 $179.9900
- 25 $170.9900
- 50 $161.9900
- 100 $154.7900
- Show All
|
Buy Now
|
|
PE3C1000-60
D#: PE3C1000-60
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 60 inches. N Female Bulkhead to N Female Bulkhead Low Loss Cable 60 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly N female bulkhead to N female bulkhead low loss cable 60 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N female bulkhead to N female bulkhead low loss cable 60 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and type N bulkhead cable connection on the other. Our low loss N type to type N cable assemblies have a female gender on end 1 and female on end 2. This type N to type N cable is a female to female coax assembly, PE3C1000-60, can also be known as a low loss N type jack to N type jack cable assembly and will be shipped same-day as it is purchased. Type N jack to type N jack cable assembly PE3C1000-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N female bulkhead to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N jack bulkhead to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N female bulkhead low loss cable 60 inch length using PE-P142LL coax, RoHS.
Min Qty:
1
Package Multiple:
1
|
17
|
- 1 $443.9900
- 25 $421.7900
- 50 $399.5900
|
Buy Now
|
|
PEWRL0006
D#: PEWRL0006
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
3
|
- 1 $3,290.0000
- 5 $3,224.2000
- 10 $3,158.4000
- 25 $3,092.6000
- Show All
|
Buy Now
|
|
PE20S0006
D#: PE20S0006
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $3,890.0000
- 5 $3,734.4000
- 10 $3,578.8000
|
Buy Now
|
|
PE3W00060
D#: PE3W00060
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Female Bulkhead Cable. PE3W00060 is a BNC male right angle to BNC female bulkhead cable using LMR-100A coax. This Pasternack BNC male right angle to BNC female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00060 BNC male right angle to BNC female bulkhead cable assembly is constructed with LMR-100A coax, * LMRâ„¢ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W00065
D#: PE3W00065
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using PE-SR4. PE3W00065 is a SMA male to SMA female bulkhead cable using PE-SR402AL coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W00065 SMA male to SMA female bulkhead cable assembly is constructed with PE-SR402AL coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W00062
D#: PE3W00062
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. QD SMA Male to SMA Female 4 Hole Flange Cable Usin. PE3W00062 is a SMA male to SMA female 4 hole flange cable using RG142 coax. This Pasternack SMA male to SMA female 4 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA 4 hole flange cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W00062 SMA male to SMA female 4 hole flange cable assembly is constructed with RG142 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
RECOM Power 
SiTime Corporation 
Rochester Electronics 
Future Electronics 
Master Electronics 
Coilcraft Direct 
Flip Electronics 
Richardson RFPD 
Powell Electronics 
C Plus Electronics 
ICMILES Electronics Ltd 
Velocity Electronics 
Tencell 
ComSIT USA 
CDM Electronics 
ChipNobo Co., Limited 
Kurrent Technology 
Quest Components 
Dynamic Solutions GmbH 
Blume Elektronik Distribution GmbH 
Component Stockers 
PUI 
Component Search 
Bristol Electronics 
ICProFast Technology 
Commodity Components Intl 
PEI Genesis 
West Coast Components Inc. 
DB Roberts 
Interstate Connecting Components 
North Star Micro Electronics 
Chip-Germany GmbH 
Component Solutions, Inc. 
Sager 
Sensible Micro Corporation 
NAC 
N&S Electronic 
IBS Electronics 
Allelco Limited 
Time Way Electronics Limited 
L-com US 
Bisco Industries 
Techni-Tool, Inc. 
Microchip USA 
Kepictronics Inc. 
TestEquity LLC 
Tejas Networks 
GlobalTek Components 
New Strength Electronic Co., Limited 
Win Source Electronics 
NexGen Digital
J2 Sourcing 
R&J Components 
New Advantage Corporation 
Chips Pulse Industry Limited 
Unicom Electronics 
Avnet Abacus 
JRH Electronics 
Sierra IC 
ES Components 
ACDS 
Utmel Electronic 
Rutronik 
Vyrian 
RG Elektrotechnologie GmbH 
CXDA Electronics 
YIC International Co., Limited 
LCSC 
MountainView Components Inc. 
Braemac Americas-Symmetry 
Perfect Parts Corporation 
SEMIX 
Shengyu Electronics Technology Limited 
Pasternack Enterprises US 
Cytech Systems Limited 
Karl Kruse GmbH & Co KG 
Avnet Silica 
Futuretech Components Ltd 
Tedss 
AMH Components Ltd 
Chip Stock 
Silitech Components Inc. 
LIBRA Elektronik GmbH 
Opulent Electronics Inc. 
Metaverse IC Inc. 
IC Components Limited 
Neutron USA 
EBV Elektronik 
Greenchips