|
PE3M0017-200CM
D#: PE3M0017-200CM
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. MIL-DTL-17 N Female to SMA Male Cable 200 cm Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female to SMA male cable 200 cm length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female to SMA male cable 200 cm length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/02-0503 type N to M39012/55-3028 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/02-0503 N type cable connection on one end and M39012/55-3028 SMA cable connection on the other. Our M39012/02-0503 type N to M39012/55-3028 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/02-0503 type N to M39012/55-3028 SMA cable is a female to male coax assembly, PE3M0017-200CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/02-0503 type N jack to M39012/55-3028 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/02-0503 N type jack to M39012/55-3028 SMA plug cable assembly PE3M0017-200CM is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/02-0503 N cable assembly is manufactured with M39012/02-0503 type N to M39012/55-3028 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/02-0503 type N female to M39012/55-3028 SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0017-200CM can also be used in the other direction and will be M39012/55-3028 SMA male to M39012/02-0503 N type female cable assembly if the opposite connectivity is required. M39012/02-0503 type N jack to M39012/55-3028 SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/02-0503 N type to M39012/55-3028 SMA cable assembly for quick shipment worldwide. Variations of M39012/02-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female to SMA male cable 200 cm length using M17/60-RG142 coax.
Min Qty:
1
Package Multiple:
1
|
104
|
- 1 $267.9900
- 25 $254.5900
- 50 $241.1900
|
Buy Now
|
|
PE40014
D#: PE40014
|
Pasternack Enterprises
|
Key Specifications, Polarity: Standard, Connector Series: HD-BNC, Connector Gender: Female, Impedance: 75 Ohm, Body Style: Right Angle, Attachment Method: Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 12 GHz, Interface Type 1: Thru Hole. 12G SDI 75 Ohm HD-BNC Female Right Angle Bulkhead Mount Connector Solder Attachment Thru Hole PCB. PE40014 HD-BNC female right angle bulkhead pcb connector has an interface type of HD-BNC female thru hole and a 75 Ohm impedance. Pasternack HD-BNC female bulkhead connector uses shield/contact solder as an attachment method. Our female HD-BNC right angle pcb connector provides a minimum frequency of DC and a maximum frequency of 12 GHz. The Pasternack right angle HD-BNC female bulkhead pcb connector has a PTFE dielectric type. The Pasternack HD-BNC pcb connector has a brass body with nickel plating. Our PE40014 HD-BNCright angle connector uses brass contact and a nickel plating material. This HD-BNC female right angle bulkhead pcb RF connector is REACH compliant. This Pasternack right angle female HD-BNC bulkhead connector will ship the same day as purchased. Our bulkhead HD-BNC right angle female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom HD-BNC connector cable assemblies that will ship the same day as well.
Min Qty:
1
Package Multiple:
1
|
49
|
- 1 $17.9900
- 25 $17.0900
- 50 $16.1900
- 100 $15.4700
- Show All
|
Buy Now
|
|
PE3W10019-36
D#: PE3W10019-36
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-500, RF Cable Type: SPO-500, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Male Low PIM Cable 36 Inch Length Using SPO-500 Coax., Radio frequency assembly N male to N male low PIM cable 36 inch length using SPO-500 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male low PIM cable 36 inch length using SPO-500 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low PIM type N to N type cable assemblies have a male gender on end 1 and male on end 2. This N type to type N cable is a male to male coax assembly, PE3W10019-36, can also be known as a low PIM type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3W10019-36 is built with SPO-500 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low PIM cable 36 inch length using SPO-500 coax.
Min Qty:
1
Package Multiple:
1
|
23
|
- 1 $86.9900
- 25 $82.6400
- 50 $78.2900
- 100 $74.8100
- Show All
|
Buy Now
|
|
PE3C100012-24
D#: PE3C100012-24
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Female Bulkhead Low Loss Space Cable 24 Inch Length Using PE-R200LL Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss space cable 24 inch length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA female bulkhead low loss space cable 24 inch length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our low loss space SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3C100012-24 can also be known as a low loss space SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.437-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. SMA low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100012-24 RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our SMA male to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMA plug to SMA jack cable assembly PE3C100012-24 is built with PE-R200LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. PE3C100012-24 can also be used in the other direction and will be a SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss space SMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss space RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
19
|
- 1 $429.9900
- 10 $412.7900
- 25 $395.5900
- 100 $378.3900
- Show All
|
Buy Now
|
|
PE3C100015-12
D#: PE3C100015-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female Bulkhead to TNC Male Low Loss Space Cable 12 Inch Length Using PE-R200LL Coax., Radio frequency assembly SMA female bulkhead to TNC male low loss space cable 12 inch length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to TNC male low loss space cable 12 inch length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a SMA bulkhead cable connection on one end and a TNC cable connection on the other. Our low loss space SMA to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C100015-12 can also be known as a low loss space SMA jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.562-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. SMA low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100015-12 RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our bulkhead SMA female to TNC male cable has a maximum VSWR of 1.4:1. SMA jack to TNC plug cable assembly PE3C100015-12 is built with PE-R200LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. PE3C100015-12 can also be used in the other direction and will be a TNC male to SMA female bulkhead cable assembly if the opposite connectivity is required. Low loss space SMA jack bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss space RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
13
|
- 1 $363.9900
- 10 $349.4300
- 25 $334.8700
- 100 $320.3100
- Show All
|
Buy Now
|
|
PE910010
D#: PE910010
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: 1.35mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.0mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 90 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Passivated Stainless Steel, Connector Mount Method 2: None, Connector Body Material 2: Passivated Stainless Steel. 1.35mm Male to 1.0mm Male Adapter, Engineering Grade. The engineering grade 1.35mm to 1.0mm adapter PE910010 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance and a maximum VSWR of 1.3:1. This RF adapter has a male to male gender configuration, which provides easier connections in tighter spaces. The 1.35mm to 1.0mm adapter is an engineering grade adapter designed for repeated use in prototyping and lab applications for RF and microwave systems without performance degradation. Our 1.35mm to 1.0mm adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 90 GHz. This engineering grade between series RF adapter has a dielectric withstanding voltage of 500 Vrms. This 1.35mm male to 1.0mm male adapter is one of the many RF components that ship the same business day as they are ordered. The PE910010 male 1.35mm to male 1.0mm adapter has a straight body. This Pasternack 1.35mm to 1.0mm coax adapter is an in-line RF adapter in an engineering grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. Our adapter has a maximum insertion loss of 0.758 dB. This engineering grade RF adapter has a 0.335-inch length, 0.335-inch width, and 0.015 lbs weight. The PE910010 adapter from Pasternack is made from a passivated stainless steel connector body and has a beryllium copper center contact. Our 1.35mm male to 1.0mm male radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This engineering grade RF adapter has an operating temperature range of -65 to 165 degrees C. Additional dimensions and specifications for this between series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of 1.35mm to 1.0mm radio frequency engineering grade adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 90 GHz RF adapter that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
8
|
- 1 $1,100.0000
- 25 $1,056.0000
- 50 $1,023.0000
- 100 $1,001.0000
- Show All
|
Buy Now
|
|
PE3C100016-200CM
D#: PE3C100016-200CM
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: PE-R200LL, RF Cable Type: PE-R200LL, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. TNC Male to TNC Male Low Loss Space Cable 200 CM Length Using PE-R200LL Coax., Radio frequency assembly TNC male to TNC male low loss space cable 200 cm length using PE-R200LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC male low loss space cable 200 cm length using PE-R200LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss space cable assembly is built with a TNC cable connection on one end and a TNC cable connection on the other. Our low loss space TNC to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3C100016-200CM can also be known as a low loss space TNC plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.562-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. TNC low loss space cable assemblies from Pasternack are ideal for applications including vacuum environments, low earth orbit (leo), space (exploration, launches, maintenance, stations), ground systems and satellites. The minimum bend radius for this cable is 1.08 inches, allowing for a single bend without damaging the cable. Our PE3C100016-200CM RF cable has a ETFE jacket of 0.216-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 82% and a minimum RF shielding of 100 dB. Our TNC male to TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3C100016-200CM is built with PE-R200LL which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this low loss space RF cable are available on our downloadable PDF datasheet. Low loss space TNC plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss space RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
6
|
- 1 $570.0000
- 10 $547.2000
- 25 $524.4000
- 100 $501.6000
- Show All
|
Buy Now
|
|
PEW10DV001
D#: PEW10DV001
|
Pasternack Enterprises
|
Key Specifications, Number of Output Ports: 2, Min Freq: 87 GHz, Max Freq: 93 GHz, VSWR, Max Input: 1.4:1, VSWR, Max Output: 1.6:1, Insertion Loss, Max: 0.8 dB, Isolation Min: 15 dB, Amplitude Balance, Max : 0.5 dB, Max Input Power: 1 Watt, Housing Material: Copper, Phase Balance, Max: 6 Degrees, Input Waveguide Interface: WR-10, Output Waveguide Interface: WR-10. 2 Way WR-10 Waveguide Power Divider UG-187/U-M Flange From 87 GHz to 93 GHz, Copper. The PEW10DV001 2-way waveguide power divider is rated for a minimum frequency of 87 GHz and a maximum frequency of 93 GHz. This Pasternack 2 port power divider/coaxial splitter has a maximum input power of 1 Watts. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Make your online purchase right now to take advantage of our same day shipping. Pasternack’s PEW10DV001 power splitter has a copper housing. This waveguide power divider has a 0.5 dB maximum amplitude balance. Our radio frequency power divider is built to operate across a temperature range of -40 to 70 deg C. This WR-10 waveguide power divider has 6.00 degrees maximum phase balance. Our 2-way waveguide power divider comes with a WR-10 waveguide interface and has 1 Watts of maximum input power. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. This 2-way RF power divider from Pasternack has a maximum insertion loss of 0.8 dB. The maximum input VSWR of this splitter/divider is 1.4:1 and the minimum isolation is 15 dB. Our WR-10 waveguide power divider has a gold-colored flange. The PEW10DV001 waveguide power divider from Pasternack is ideal for test benches, radar, satellite, microwave radio, attenuation measurements and power measurements applications. Our 2 port waveguide power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 2-way coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect waveguide power divider for your requirements.
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $3,570.0000
- 5 $3,498.6000
- 10 $3,427.2000
- 25 $3,355.8000
- Show All
|
Buy Now
|
|
PEW34CP001-40
D#: PEW34CP001-40
|
Pasternack Enterprises
|
Key Specifications. Flange Size UG-1530/U Flange Flange Group Standard Minimum Frequency 21.7 GHz Maximum Frequency 33 GHz Maximum VSWR 1.5:1 Maximum Insertion Loss 0.25 dB Coupling 40 dB. WR-34 Waveguide 40 dB Broadwall Coupler, UG-1530/U Flange,2.92mm Female Coupled Port, 21.7 GHz to 33 GHz, Copper. The PEW34CP001-40 is a WR-34 Directional Broadwall waveguide coupler with 2.92mm female coupled port that operates inthe frequency range of 21.7 to 33 GHz. This Waveguide component has a maximum VSWR of 1.5:1. These designs are madeof painted copper alloy and incorporate a broad wall configuration that result in a mid-band nominal coupling value of 10, 20,30, 40 or 50 dB. Common applications for this component would be where power measurements are required within a systemfor measuring/sampling power or frequency monitoring with minimal signal loss to the main transmission line. Pasternackoffers a complete family of waveguide Crossguide and Broadwall couplers that are in-stock and ship same day.
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $3,050.0000
- 5 $2,989.0000
- 10 $2,928.0000
- 25 $2,867.0000
- Show All
|
Buy Now
|
|
PE3W00102
D#: PE3W00102
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: F, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm F Female Bulkhead to 75 Ohm MCX Plug Cable Using 75 Ohm RG187 Coax. PE3W00102 is a F female bulkhead to MCX plug cable using RG187 coax. This Pasternack F female bulkhead to MCX plug cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm MCX for connector 2. Our female F bulkhead to plug MCX cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W00102 F female bulkhead to MCX plug cable assembly is constructed with RG187 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
RECOM Power 
Rochester Electronics 
SiTime Corporation 
TE Connectivity 
Coilcraft Direct 
Master Electronics 
Flip Electronics 
Tencell 
TestEquity LLC 
Microchip USA 
L-com US 
Bristol Electronics 
NAC 
ComSIT USA 
Richardson RFPD 
Blume Elektronik Distribution GmbH 
Velocity Electronics 
Interstate Connecting Components 
PEI Genesis 
Axis Part Limited 
ChipNobo Co., Limited 
PUI 
Powell Electronics 
DB Roberts 
Kurrent Technology 
Techni-Tool, Inc. 
ANDE Electronics 
Component Stockers 
Chip-Germany GmbH 
West Coast Components Inc. 
Dynamic Solutions GmbH 
Allelco Limited 
Quest Components 
Component Search 
Component Solutions, Inc. 
ICProFast Technology 
Kepictronics Inc. 
Time Way Electronics Limited 
North Star Micro Electronics 
Ameya Holding Limited 
ICMILES Electronics Ltd 
Sager 
JRH Electronics 
Rutronik 
MountainView Components Inc. 
Sense Electronic Company Limited 
Avnet Abacus 
New Advantage Corporation 
Unicom Electronics 
ES Components 
J2 Sourcing 
LCSC 
New Strength Electronic Co., Limited 
Cytech Systems Limited 
Opulent Electronics Inc. 
Utmel Electronic 
GlobalTek Components 
Metaverse IC Inc. 
SEMIX 
Silitech Components Inc. 
CXDA Electronics 
Neutron USA 
EBV Elektronik 
YIC International Co., Limited 
Chip Stock 
Karl Kruse GmbH & Co KG 
AMH Components Ltd 
LIBRA Elektronik GmbH 
R&J Components 
Win Source Electronics 
NexGen Digital
Perfect Parts Corporation 
Pasternack Enterprises US 
Avnet Silica 
IC Components Limited 
RG Elektrotechnologie GmbH 
Tedss 
Vyrian 
Braemac Americas-Symmetry 
ACDS 
ICHOT TECHNOLOGY LIMITED 
Greenchips 
Sierra IC 
Chips Pulse Industry Limited 
Venkel Ltd.