|
PE3C4062-18
D#: PE3C4062-18
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: MMBX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length: 18 inches. Snap-On MMBX Plug to SMA Female Cable 18 Inch Length Using RG316-DS Coax., Radio frequency assembly snap-on MMBX plug to SMA female cable 18 inch length using RG316-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on MMBX plug to SMA female cable 18 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMBX cable connection on one end and SMA cable connection on the other. Our MMBX to SMA cable assemblies have a plug gender on end 1 and female on end 2. This MMBX to SMA cable is a plug to female coax assembly, PE3C4062-18, can also be known as a MMBX male to SMA jack cable assembly and will be shipped same-day as it is purchased. MMBX male to SMA jack cable assembly PE3C4062-18 is built with RG316-DS which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with MMBX to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency MMBX plug to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4062-18 can also be used in the other direction and will be SMA female to MMBX plug cable assembly if the opposite connectivity is required. MMBX male to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to SMA cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug to SMA female cable 18 inch length using RG316-DS coax.
Min Qty:
1
Package Multiple:
1
|
85
|
- 1 $60.9900
- 25 $57.9400
- 50 $54.8900
- 100 $52.4500
- Show All
|
Buy Now
|
|
PEWAN062-10
D#: PEWAN062-10
|
Pasternack Enterprises
|
Key Specifications, Waveguide Size: WR-62, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz, Beam Width V: 52.1, Beam Width H: 51.6. WR-62 Waveguide Antenna, 12.4 GHz to 18 GHz Frequency Range, 10 dBi Gain,. PEWAN062-10 WR-62 gain horn antenna is also known as a waveguide horn. This WR-62 gain horn antenna has a 10 dB nominal gain and a square cover flange. Our 10 dB WR62 horn antenna has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. WR-62 gain horn waveguide antenna PEWAN062-10 has a vertical beam width of 52.1 and horizontal of 51.6 degrees at 3 dB. This WR-62 gain horn antenna with 10 dB is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR62 waveguide horn antenna can ship worldwide the same day as it is purchased as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
11
|
- 1 $1,340.0000
- 5 $1,313.2000
- 10 $1,286.4000
- 25 $1,259.6000
- Show All
|
Buy Now
|
|
PEWAN062-10NF
D#: PEWAN062-10NF
|
Pasternack Enterprises
|
Key Specifications, Waveguide Size: WR-62, Gain Min: 10, Beam Width, 3dB V: 52.1, Beam Width, 3dB H: 51.6, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 10 dBi gain, N Female connector. PEWAN062-10NF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 standard gain horn antenna has a waveguide to coax adapter transition with a type N connector input that is female gender. WR-62 standard gain horn waveguide antenna with type N input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack PEWAN062-10NF WR-62 waveguide horn standard gain antenna is rated at a nominal 10 dB gain. Our 10 dB standard gain horn WR-62 waveguide antenna with type N adapter has a vertical beam width of 52.1 and horizontal of 51.6 degrees at 3 dB. Pasternack is where to buy a WR-62 standard waveguide gain horn antenna with WR-62 input. This gain horn antenna is just one part of over 40,000 RF, microwave and millimeter wave guide components available and in-stock at our Irvine, CA United States warehouse. Our WR-62 standard waveguide horn antenna with N type female interface can ship worldwide the same day that it is purchased as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
11
|
- 1 $1,580.0000
- 5 $1,516.8000
- 10 $1,453.6000
- 25 $1,390.4000
- Show All
|
Buy Now
|
|
PE7062-10
D#: PE7062-10
|
Pasternack Enterprises
|
Key Specifications, Design: DC Bias, Maximum Frequency: 2 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.35:1, Attenuation: 10 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 10 dB DC Bias Attenuator, N Male to N Female Passivated Stainless Steel Body Rated to 2 Watts from 500 MHz to 2 GHz. PE7062-10 is a fixed DC Bias attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. The Pasternack N attenuator has a male gender on side 1 and a N female connector on side 2. PE7062-10 10 dB attenuator is rated for up to 2 GHz. This microwave attenuator is rated to 2 Watts at the stated attenuation. Our fixed RF attenuator PE7062-10 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
Min Qty:
1
Package Multiple:
1
|
10
|
- 1 $261.9900
- 10 $251.5100
- 25 $241.0300
|
Buy Now
|
|
PEWAN062-15ELSF
D#: PEWAN062-15ELSF
|
Pasternack Enterprises
|
Key Specifications, Waveguide Size: WR-62, Gain Min: 15, Beam Width, 3dB V: 31, Beam Width, 3dB H: 32, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 15 dBi gain, End Launch SMA Female connector. PEWAN062-15ELSF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 standard gain horn antenna has a waveguide to coax adapter transition with a SMA connector input that is female gender. WR-62 standard gain horn waveguide antenna with SMA input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack PEWAN062-15ELSF WR-62 waveguide horn standard gain antenna is rated at a nominal 15 dB gain. Our 15 dB standard gain horn WR-62 waveguide antenna with SMA adapter has a vertical beam width of 31 and horizontal of 32 degrees at 3 dB. Pasternack is where to buy a WR-62 standard waveguide gain horn antenna with WR-62 input. This gain horn antenna is just one part of over 40,000 RF, microwave and millimeter wave guide components available and in-stock at our Irvine, CA United States warehouse. Our WR-62 standard waveguide horn antenna with SMA female interface can ship worldwide the same day that it is purchased as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
4
|
- 1 $1,690.0000
- 5 $1,622.4000
- 10 $1,554.8000
- 25 $1,487.2000
- Show All
|
Buy Now
|
|
PEWGCOV062-10
D#: PEWGCOV062-10
|
Pasternack Enterprises
|
Key Specifications, Product Type: Horn Covers, Waveguide Size: WR-62, Body Material: Polymethacrylimide (PMI). Standard Gain Horn Radome Cover for PEWAN062-10 Horn Antenna. PEWGCOV062-10 is a radome cover for PEWAN062-10 10 dBi WR-62 Standard Gain Horn antenna. This waveguide antenna radome cover is made from high strength, thermally stable Polymethacrylimide (PMI). PMI offers a low Relative Permittivity (Dielectric Constant) at the high frequency ranges seen with microwave and millimeter wave components. This allows for minimal signal loss or attenuation over other materials. Increase your system capabilities with our PMI radome covers, designed to enhance the durability and longevity of standard gain horn antennas. Shielding against environmental elements, our radome covers ensure consistent signal integrity in any conditions. PEWGCOV062-10 has internal dimensions of 1.1 in by 0.9 in and will fit 10 dBi WR-62 standard gain horns. Pasternack offers a wide selection of high performance waveguide components available in stock and same-day shipping to customers worldwide.
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $261.9900
- 10 $251.5100
- 25 $241.0300
- 100 $230.5500
- Show All
|
Buy Now
|
|
PE1WAN062-10SF
D#: PE1WAN062-10SF
|
Pasternack Enterprises
|
Key Specifications. Waveguide Size WR-62 Gain Min 10 Beam Width, 3dB V 52.1 Beam Width, 3dB H 51.6 Frequency, Min 12.4 GHz Frequency, Max 18 GHz. WR-62 Standard Gain Horn with 10 dBi gain, SMA Female connector, Integrated Cage-Style Mount., The PE1WAN062-10SF standard gain horn antenna with integrated cage-style mount (also known as waveguide horn) from Pasternack is part of our comprehensive selection of waveguide antennas. The cage-style mount is a ruggedized aluminum mounting solution that integrates with test and measurement positioning systems, ensuring precise alignment and protection of the antenna. This standard gain horn is mated with a WR-62 to SMA Female waveguide to coaxial adapter and operates from 12.4 GHz to 18 GHz. Our PE1WAN062-10SF standard gain horn antenna with integrated cage-style mount has a nominal gain of 10 dBi with a Horizontal and Vertical HPBW (Half Power Beam Width) of 52.1 dB and 51.6 dB respectively. Pasternack's SMA Female to WR-62 standard gain horns are available in 10, 15 and 20 dBi models with pyramidal shape and connectorized input. Waveguide antennas, such as the PE1WAN062-10SF are used in a wide variety of applications due to the high-power handling capability, low loss, high directivity, and near constant electrical performance. Our WR-62 waveguide antennas with SMA Female interface is part of over 40,000 RF, microwave and millimeter wave components from Pasternack available worldwide and ship same day. Features 12.4 GHz to 18 GHz WR-62 Waveguide Band 10 dBi Nominal Gain SMA Female Connector Ruggedized Aluminum Cage-Style Mount Integrates with Positioning Systems Applications Antenna Measurements Wireless Communication Laboratory Use Microwave Radio Systems Radome Testing Automotive Antenna Test Solutions Radar Cross Section Satellite Antenna Testing.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $2,080.0000
- 5 $1,996.8000
- 10 $1,913.6000
- 25 $1,830.4000
- Show All
|
Buy Now
|
|
PE1WAN062-15NF
D#: PE1WAN062-15NF
|
Pasternack Enterprises
|
Key Specifications. Waveguide Size WR-62 Gain Min 15 Beam Width, 3dB V 31 Beam Width, 3dB H 32 Frequency, Min 12.4 GHz Frequency, Max 18 GHz. WR-62 Standard Gain Horn with 15 dBi gain, N Female connector, Integrated Cage-Style Mount., The PE1WAN062-15NF standard gain horn antenna with integrated cage-style mount (also known as waveguide horn) from Pasternack is part of our comprehensive selection of waveguide antennas. The cage-style mount is a ruggedized aluminum mounting solution that integrates with test and measurement positioning systems, ensuring precise alignment and protection of the antenna. This standard gain horn is mated with a WR-62 to N Female waveguide to coaxial adapter and operates from 12.4 GHz to 18 GHz. Our PE1WAN062-15NF standard gain horn antenna with integrated cage-style mount has a nominal gain of 15 dBi with a Horizontal and Vertical HPBW (Half Power Beam Width) of 31 dB and 32 dB respectively. Pasternack's N Female to WR-62 standard gain horns are available in 10, 15 and 20 dBi models with pyramidal shape and connectorized input. Waveguide antennas, such as the PE1WAN062-15NF are used in a wide variety of applications due to the high-power handling capability, low loss, high directivity, and near constant electrical performance. Our WR-62 waveguide antennas with N Female interface is part of over 40,000 RF, microwave and millimeter wave components from Pasternack available worldwide and ship same day. Features 12.4 GHz to 18 GHz WR-62 Waveguide Band 15 dBi Nominal Gain N Female Connector Ruggedized Aluminum Cage-Style Mount Integrates with Positioning Systems Applications Antenna Measurements Wireless Communication Laboratory Use Microwave Radio Systems Radome Testing Automotive Antenna Test Solutions Radar Cross Section Satellite Antenna Testing.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $2,160.0000
- 5 $2,073.6000
- 10 $1,987.2000
- 25 $1,900.8000
- Show All
|
Buy Now
|
|
PE1WAN062-10NM
D#: PE1WAN062-10NM
|
Pasternack Enterprises
|
Key Specifications. Waveguide Size WR-62 Gain Min 10 Beam Width, 3dB V 52.1 Beam Width, 3dB H 51.6 Frequency, Min 12.4 GHz Frequency, Max 18 GHz. WR-62 Standard Gain Horn with 10 dBi gain, N Male connector, Integrated Cage-Style Mount., The PE1WAN062-10NM standard gain horn antenna with integrated cage-style mount (also known as waveguide horn) from Pasternack is part of our comprehensive selection of waveguide antennas. The cage-style mount is a ruggedized aluminum mounting solution that integrates with test and measurement positioning systems, ensuring precise alignment and protection of the antenna. This standard gain horn is mated with a WR-62 to N Male waveguide to coaxial adapter and operates from 12.4 GHz to 18 GHz. Our PE1WAN062-10NM standard gain horn antenna with integrated cage-style mount has a nominal gain of 10 dBi with a Horizontal and Vertical HPBW (Half Power Beam Width) of 52.1 dB and 51.6 dB respectively. Pasternack's N Male to WR-62 standard gain horns are available in 10, 15 and 20 dBi models with pyramidal shape and connectorized input. Waveguide antennas, such as the PE1WAN062-10NM are used in a wide variety of applications due to the high-power handling capability, low loss, high directivity, and near constant electrical performance. Our WR-62 waveguide antennas with N Male interface is part of over 40,000 RF, microwave and millimeter wave components from Pasternack available worldwide and ship same day. Features 12.4 GHz to 18 GHz WR-62 Waveguide Band 10 dBi Nominal Gain N Male Connector Ruggedized Aluminum Cage-Style Mount Integrates with Positioning Systems Applications Antenna Measurements Wireless Communication Laboratory Use Microwave Radio Systems Radome Testing Automotive Antenna Test Solutions Radar Cross Section Satellite Antenna Testing.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $2,080.0000
- 5 $1,996.8000
- 10 $1,913.6000
- 25 $1,830.4000
- Show All
|
Buy Now
|
|
PE3W06213/HS
D#: PE3W06213/HS
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
RECOM Power 
Rochester Electronics 
Future Electronics 
Coilcraft Direct 
Master Electronics 
Flip Electronics 
Sensible Micro Corporation 
IBS Electronics 
Interstate Connecting Components 
Powell Electronics 
Quest Components 
Bisco Industries 
Blume Elektronik Distribution GmbH 
DB Roberts 
Chip-Germany GmbH 
ChipNobo Co., Limited 
Richardson RFPD 
Dynamic Solutions GmbH 
NAC 
L-com US 
ICMILES Electronics Ltd 
Tencell 
N&S Electronic 
Bristol Electronics 
Allelco Limited 
ComSIT USA 
TestEquity LLC 
Component Stockers 
Velocity Electronics 
PEI Genesis 
ICProFast Technology 
North Star Micro Electronics 
West Coast Components Inc. 
Kurrent Technology 
C Plus Electronics 
Microchip USA 
Component Search 
Kepictronics Inc. 
Sager 
Techni-Tool, Inc. 
CDM Electronics 
Time Way Electronics Limited 
Commodity Components Intl 
Avnet Abacus 
MountainView Components Inc. 
R&J Components 
JRH Electronics 
ES Components 
Futuretech Components Ltd 
YIC International Co., Limited 
Avnet Silica 
Sierra IC 
Vyrian 
Shengyu Electronics Technology Limited 
EBV Elektronik 
Pasternack Enterprises US 
Tedss 
New Strength Electronic Co., Limited 
Neutron USA 
Silitech Components Inc. 
CXDA Electronics 
Unicom Electronics 
Metaverse IC Inc. 
Braemac Americas-Symmetry 
LIBRA Elektronik GmbH 
Perfect Parts Corporation 
LCSC 
Opulent Electronics Inc. 
Utmel Electronic 
Win Source Electronics 
NexGen Digital
AMH Components Ltd 
Cytech Systems Limited 
Karl Kruse GmbH & Co KG 
Chip Stock 
Rutronik 
Chips Pulse Industry Limited 
Venkel Ltd. 
New Advantage Corporation 
Greenchips 
J2 Sourcing 
ACDS 
GlobalTek Components 
IC Components Limited