|
PE910058
D#: PE910058
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Jack, Connector Polarity 2: Reverse Polarity, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 11 GHz, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None, Connector Body Material 2: Brass, Connector Body Plating 2: Nickel. Commercial Grade N Male to RP-SMA Jack Adapter., The commercial grade type N to SMA adapter PE910058 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance. This RF adapter has a male to jack gender configuration, which provides easier connections in tighter spaces. Our type N to reverse polarity SMA adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 11 GHz. This commercial grade between series RF adapter has a dielectric withstanding voltage of 1,000 Vrms. This type N male to SMA reverse polarity jack adapter is one of the many RF components that ship the same business day as they are ordered. The PE910058 male type N to jack SMA adapter has a straight body. This Pasternack type N to SMA coax adapter is an in-line RF adapter in a commercial grade design. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. Our adapter has a maximum insertion loss of 0.15 dB. This commercial grade RF adapter has a 1.27-inch length, 0.8-inch width, and 0.02 lbs weight. The PE910058 adapter from Pasternack is made from a brass connector body and has a brass center contact. Our type N male to SMA reverse polarity jack radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This commercial grade RF adapter has an operating temperature range of -55 to 85 degrees C. Additional dimensions and specifications for this between series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of type N to reverse polarity SMA radio frequency commercial grade adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 11 GHz RF adapter that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $11.9900
- 5 $11.7500
- 10 $11.5100
- 25 $11.2700
- Show All
|
Buy Now
|
|
PE3C10058/HS-300
D#: PE3C10058/HS-300
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: Mini UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. Mini UHF Male to Mini UHF Female Low Loss Cable 300 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly mini UHF male to mini UHF female low loss cable 300 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The mini UHF male to mini UHF female low loss cable 300 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini UHF to mini UHF cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a mini UHF cable connection on one end and a mini UHF cable connection on the other. Our low loss mini UHF to mini UHF cable assembly has a male gender on end 1 and a female on end 2. PE3C10058/HS-300 can also be known as a low loss mini UHF plug to mini UHF jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10058/HS-300 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Mini UHF plug to mini UHF jack cable assembly PE3C10058/HS-300 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to mini UHF cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10058/HS-300 can also be used in the other direction and will be a mini UHF female to mini UHF male cable assembly if the opposite connectivity is required. Low loss mini UHF plug to mini UHF jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini UHF to mini UHF cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini UHF to Mini UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $179.9900
- 10 $176.3900
- 25 $172.7900
- 100 $169.1900
- Show All
|
Buy Now
|
|
PE3C10058/HS
D#: PE3C10058/HS
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: Mini UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm. Mini UHF Male to Mini UHF Female Low Loss Cable Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly mini UHF male to mini UHF female low loss cable using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The mini UHF male to mini UHF female low loss cable using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini UHF to mini UHF cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a mini UHF cable connection on one end and a mini UHF cable connection on the other. Our low loss mini UHF to mini UHF cable assembly has a male gender on end 1 and a female on end 2. PE3C10058/HS can also be known as a low loss mini UHF plug to mini UHF jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10058/HS RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Mini UHF plug to mini UHF jack cable assembly PE3C10058/HS is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to mini UHF cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10058/HS can also be used in the other direction and will be a mini UHF female to mini UHF male cable assembly if the opposite connectivity is required. Low loss mini UHF plug to mini UHF jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini UHF to mini UHF cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini UHF to Mini UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C10058
D#: PE3C10058
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C10058/HS-12
D#: PE3C10058/HS-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: Mini UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Mini UHF Male to Mini UHF Female Low Loss Cable 12 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly mini UHF male to mini UHF female low loss cable 12 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The mini UHF male to mini UHF female low loss cable 12 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini UHF to mini UHF cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a mini UHF cable connection on one end and a mini UHF cable connection on the other. Our low loss mini UHF to mini UHF cable assembly has a male gender on end 1 and a female on end 2. PE3C10058/HS-12 can also be known as a low loss mini UHF plug to mini UHF jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10058/HS-12 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Mini UHF plug to mini UHF jack cable assembly PE3C10058/HS-12 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to mini UHF cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10058/HS-12 can also be used in the other direction and will be a mini UHF female to mini UHF male cable assembly if the opposite connectivity is required. Low loss mini UHF plug to mini UHF jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini UHF to mini UHF cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini UHF to Mini UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $58.9900
- 10 $57.8100
- 25 $56.6300
- 100 $55.4500
- Show All
|
Buy Now
|
|
PE3C10058/HS-60
D#: PE3C10058/HS-60
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: Mini UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Mini UHF Male to Mini UHF Female Low Loss Cable 60 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly mini UHF male to mini UHF female low loss cable 60 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The mini UHF male to mini UHF female low loss cable 60 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini UHF to mini UHF cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a mini UHF cable connection on one end and a mini UHF cable connection on the other. Our low loss mini UHF to mini UHF cable assembly has a male gender on end 1 and a female on end 2. PE3C10058/HS-60 can also be known as a low loss mini UHF plug to mini UHF jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10058/HS-60 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Mini UHF plug to mini UHF jack cable assembly PE3C10058/HS-60 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to mini UHF cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10058/HS-60 can also be used in the other direction and will be a mini UHF female to mini UHF male cable assembly if the opposite connectivity is required. Low loss mini UHF plug to mini UHF jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini UHF to mini UHF cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini UHF to Mini UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $78.9900
- 10 $77.4100
- 25 $75.8300
- 100 $74.2500
- Show All
|
Buy Now
|
|
PE3C10058/HS-36
D#: PE3C10058/HS-36
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: Mini UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Mini UHF Male to Mini UHF Female Low Loss Cable 36 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly mini UHF male to mini UHF female low loss cable 36 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The mini UHF male to mini UHF female low loss cable 36 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini UHF to mini UHF cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a mini UHF cable connection on one end and a mini UHF cable connection on the other. Our low loss mini UHF to mini UHF cable assembly has a male gender on end 1 and a female on end 2. PE3C10058/HS-36 can also be known as a low loss mini UHF plug to mini UHF jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10058/HS-36 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Mini UHF plug to mini UHF jack cable assembly PE3C10058/HS-36 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to mini UHF cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10058/HS-36 can also be used in the other direction and will be a mini UHF female to mini UHF male cable assembly if the opposite connectivity is required. Low loss mini UHF plug to mini UHF jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini UHF to mini UHF cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini UHF to Mini UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $68.9900
- 10 $67.6100
- 25 $66.2300
- 100 $64.8500
- Show All
|
Buy Now
|
|
PE3W10058
D#: PE3W10058
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. SHV Plug to SHV Jack Bulkhead Cable Using RG213 Coax. PE3W10058 is a SHV plug to SHV jack bulkhead cable using RG213 coax. This Pasternack SHV plug to SHV jack bulkhead cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. Our plug SHV to jack SHV bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10058 SHV plug to SHV jack bulkhead cable assembly is constructed with RG213 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C10058/HS-24
D#: PE3C10058/HS-24
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: Mini UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-UF, RF Cable Type: LMR-195-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Mini UHF Male to Mini UHF Female Low Loss Cable 24 Inch Length Using LMR-195-UF Coax with HeatShrink., Radio frequency assembly mini UHF male to mini UHF female low loss cable 24 inch length using LMR-195-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The mini UHF male to mini UHF female low loss cable 24 inch length using LMR-195-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini UHF to mini UHF cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a mini UHF cable connection on one end and a mini UHF cable connection on the other. Our low loss mini UHF to mini UHF cable assembly has a male gender on end 1 and a female on end 2. PE3C10058/HS-24 can also be known as a low loss mini UHF plug to mini UHF jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10058/HS-24 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 74% and a minimum RF shielding of 90 dB. Mini UHF plug to mini UHF jack cable assembly PE3C10058/HS-24 is built with LMR-195-UF which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to mini UHF cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10058/HS-24 can also be used in the other direction and will be a mini UHF female to mini UHF male cable assembly if the opposite connectivity is required. Low loss mini UHF plug to mini UHF jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini UHF to mini UHF cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini UHF to Mini UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $63.9900
- 10 $62.7100
- 25 $61.4300
- 100 $60.1500
- Show All
|
Buy Now
|
Microchip Technology Inc 
RECOM Power 
Rochester Electronics 
Master Electronics 
Dynamic Solutions GmbH 
Interstate Connecting Components 
NAC 
Microchip USA 
ComSIT USA 
Bristol Electronics 
North Star Micro Electronics 
ICProFast Technology 
TestEquity LLC 
Quest Components 
Techni-Tool, Inc. 
DB Roberts 
Powell Electronics 
Richardson RFPD 
Time Way Electronics Limited 
Kurrent Technology 
Allelco Limited 
Sager 
Component Stockers 
New Advantage Corporation 
Greenchips 
Sierra IC 
Tedss 
Neutron USA 
R&J Components 
Cytech Systems Limited 
EBV Elektronik 
Silitech Components Inc. 
LCSC 
LIBRA Elektronik GmbH 
Pasternack Enterprises US 
Braemac Americas-Symmetry 
Venkel Ltd. 
Avnet Silica 
Perfect Parts Corporation 
Chip Stock 
Avnet Abacus 
Rutronik 
ES Components 
Vyrian 
J2 Sourcing 
Win Source Electronics