|
PE3W10115-24
D#: PE3W10115-24
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: MMBX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Snap-On MMBX Plug Right Angle to TNC Male Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly snap-on MMBX plug right angle to TNC male cable 24 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Snap-on MMBX plug right angle to TNC male cable 24 inch length using RG316 coax, MMBX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMBX to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMBX cable connection on one end and TNC cable connection on the other. Our right angle MMBX to TNC cable assemblies have a plug gender on end 1 and male on end 2. PE3W10115-24 can also be known as a right angle MMBX male to TNC plug cable assembly and will be shipped same-day as it is purchased. MMBX male to TNC plug cable assembly PE3W10115-24 is built with RG316 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MMBX right angle plug to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10115-24 can also be used in the other direction and will be TNC male to right angle MMBX plug cable assembly if the opposite connectivity is required. MMBX right angle male to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMBX to TNC cable assembly for quick shipment worldwide. Variations of MMBX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on MMBX plug right angle to TNC male cable 24 inch length using RG316 coax.
Min Qty:
1
Package Multiple:
1
|
294
|
- 1 $101.9900
- 25 $96.8900
- 50 $91.7900
- 100 $87.7100
- Show All
|
Buy Now
|
|
PE70A1011
D#: PE70A1011
|
Pasternack Enterprises
|
Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.07:1, Attenuation: 6 dB, Connector Series 1: SMA, Connector Gender 1: Male, Connector Series 2: SMA, Connector Gender 2: Female, Body Material: Copper. 6 dB Fixed Attenuator, SMA Male to SMA Female Copper Body Rated to 2 Watts From 0.009 MHz to 6 GHz. PE70A1011 is a fixed 6 dB attenuator from Pasternack. This 6dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. The Pasternack PE70A1011 6 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 2 Watts at the stated attenuation value. Our fixed RF attenuator PE70A1011 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
Min Qty:
1
Package Multiple:
1
|
35
|
- 1 $235.9900
- 10 $226.5500
- 25 $217.1100
|
Buy Now
|
|
PE3CA1011-6
D#: PE3CA1011-6
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 6 inches. N Female Bulkhead to UMCX 2.5 Plug Cable 6 Inch Length Using RG178 Coax, RoHS., Radio frequency assembly N female bulkhead to UMCX 2.5 plug cable 6 inch length using RG178 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female bulkhead to UMCX 2.5 plug cable 6 inch length using RG178 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N bulkhead cable connection on one end and UMCX 2.5 cable connection on the other. Our type N to UMCX 2.5 cable assemblies have a female gender on end 1 and plug on end 2. This type N to UMCX 2.5 cable is a female to plug coax assembly, PE3CA1011-6, can also be known as a N type jack to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. Type N jack to UMCX 2.5 male cable assembly PE3CA1011-6 is built with RG178 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to UMCX 2.5 cable connectors, has a 50 Ohm impedance. RF specs on this 3 GHz maximum frequency N type female bulkhead to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1011-6 can also be used in the other direction and will be UMCX 2.5 plug to type N female bulkhead cable assembly if the opposite connectivity is required. N type jack bulkhead to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to UMCX 2.5 plug cable 6 inch length using RG178 coax, RoHS.
Min Qty:
1
Package Multiple:
1
|
33
|
- 1 $33.5900
- 25 $31.9100
- 50 $30.2300
- 100 $28.8900
- Show All
|
Buy Now
|
|
PE83IR1011
D#: PE83IR1011
|
Pasternack Enterprises
|
Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Minimum Frequency: 11 GHz, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 0.6 dB, Maximum Input Power: 50 Watts, Minimum Isolation: 20 dB. High Power Isolator With 20 dB Isolation From 11 GHz to 18 GHz, 50 Watts And SMA Female. Pasternack RF isolator PE83IR1011 is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This RF isolator is manufactured with SMA connectors that are female. Our SMA isolator has a minimum frequency of 11 GHz and a maximum frequency of 18 GHz. This SMA coaxial isolator has a minimum isolation of 20 dB and a maximum input power of 50 Watts. PE83IR1011 coaxial SMA isolator is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our radio frequency isolator can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.
Min Qty:
1
Package Multiple:
1
|
24
|
- 1 $850.0000
- 10 $816.0000
- 25 $782.0000
|
Buy Now
|
|
PE51OM1011
D#: PE51OM1011
|
Pasternack Enterprises
|
Key Specifications, Antenna Type: Omni, Polarization: Vertical/Horizontal, Minimum Frequency: 2.4 GHz, Maximum Frequency: 5.8 GHz, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm. Multi Band Omni Antenna 2,400-5,800 MHz N Type Female Connector., Pasternack’s PE51OM1011 is a high performance 5G / LTE outdoor 2 port omni directional standard antenna specifically designed for cellular networks, is in stock at our production facility certified to ISO 9001:2015 that ship same day internationally. The 6-11 dBi omni Antenna operates within a range of 2.4 GHz-5.8 GHz and comes with N Type female Connector which is ideal for 5G, LTE, CDMA, LPWAN/IoT/M2M applications including LoRA, LTE-M, and NB-IOT. Manufactured to the highest international standards, our commercial grade, 2 port vertical/horizontal polarized omni antenna with heavy duty steel mast mounting brackets and a lightweight pvc radome is ideally suited for all weather operation. The standard omni directional antenna with band 1 frequency range of 2.4 GHz to 2.5 GHz, gain of 6, VSWR max of 1.6:1 at F1, and band 2 with a frequency range of 5.1 GHz to 5.8 GHz, gain of 11 and VSWR max of 1.9:1 at F2, eliminates the need for different antennas and enable using the same antenna for a wide array of telecommunication applications where wide coverage is desired. Pasternack's type N connectorized PE51OM1011 antenna has a F1 HPBW Vertical Elevation of 25 Degrees, F2 HPBW Vertical Elevation of 6.5 Degrees and a HPBW Horizontal Azimuth of 360 Degrees with 100 Watts max input power. The multi band standard omni directional antenna has a type N female standard polarity threaded connector, gain nominal of 6-11 dBi gain and can be used to broadcast cellular LTE signals. The model 2 port PE51OM1011 designed specifically for the outdoors has an operational temperature between -40° to 60° deg C, and can withstand a wind velocity of up to 130 MPH. Ideal for point to multipoint use in large open areas such as base station installations or large campuses the antenna has an impedance of 50 Ohms and max input power of 100 Watts. The mounting pole diameter is between 1.6in - 3.5in, and operates on the 2.4 GHz, 4.9 GHz, 5 GHz cellular band. Pasternack’s PE51OM1011 with pvc Radome has passed through a rigorous Quality Management System (QMS) and comes from a facility certified to ISO 9001:2015. The part number PE51OM1011 is a omni directional standard series antenna with a multi band type and has a 6-11 dBi gain nominal. The included mounting bracket and hardware for this multi band omni antenna with pvc radome, makes it very easy to install. The 2 port standard omni directional 2.4 GHz, 4.9 GHz, 5 GHz band antenna with vertical/horizontal polarization eliminates the need to purchase different antennas for each frequency. Pasternack's experts on high performance 5G / LTE outdoor antennas are on hand to assist you with any inquiries on 6-11 dBi standard omni directional 2.4 GHz-5.8 GHz N Type female connector antennas. Order our LTE outdoor omni directional standard antenna PE51OM1011, 7 days a week, 24 hours a day using our on-line ordering system with no MOQs (minimum order quantity) and same-day shipping via UPS or FedEx.
Min Qty:
1
Package Multiple:
1
|
8
|
- 1 $266.1900
- 25 $252.8800
- 50 $239.5700
- 100 $228.9200
- Show All
|
Buy Now
|
|
PE910114
D#: PE910114
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 1.85mm, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 67 GHz, Adapter Body Style: 30 Degree, Connector Mount Method 1: None, Connector Body Material 1: Passivated Stainless Steel, Connector Mount Method 2: None, Connector Body Material 2: Passivated Stainless Steel. 1.85mm Plug to 1.85mm Plug 30 Degree Adapter., The 1.85mm 30 degree adapter PE910114 is part of our full line of available RF, microwave, and millimeter wave components from Pasternack. Our radio frequency adapter comes with a 50 Ohm impedance and a maximum VSWR of 1.35:1. This RF adapter has a plug to plug gender configuration, which provides easier connections in tighter spaces. Our 1.85mm to 1.85mm adapter is precision manufactured to RF component industry specifications and has a maximum frequency of 67 GHz. This in-series RF adapter has a dielectric withstanding voltage of 500 Vrms. This 1.85mm plug to 1.85mm plug adapter is one of the many RF components that ship the same business day as they are ordered. The PE910114 plug 1.85mm to plug 1.85mm adapter has a 30 degree body. Our RF adapter is often used to enable connections between two connector types that would otherwise not mate. Our adapter has a maximum insertion loss of 0.654 dB. This RF adapter has a 1.016-inch length, 0.312-inch width, and 0.016 lbs weight. The PE910114 adapter from Pasternack is made from a passivated stainless steel connector body and has a beryllium copper center contact. Our 1.85mm plug to 1.85mm plug 30 degree radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/disconnect cycles is high. This RF adapter has an operating temperature range of -55 to 105 degrees C. Additional dimensions and specifications for this in-series adapter are on our downloadable PDF datasheet above. Pasternack has one of the largest in-stock selections of 30 degree 1.85mm to 1.85mm radio frequency adapters for international and domestic orders, including custom cable assemblies. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 67 GHz RF adapter that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
5
|
- 1 $1,050.0000
- 5 $1,029.0000
- 10 $1,008.0000
- 25 $987.0000
- Show All
|
Buy Now
|
|
PE3C10112
D#: PE3C10112
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
5
|
|
Buy Now
|
|
PEANKIT1011
D#: PEANKIT1011
|
Pasternack Enterprises
|
Key Specifications, Antenna Type: OmniThe PEANKIT1011 Helium Hotspot Antenna Upgrade kit from Pasternack was designed with the serious Helium HNT Miner in mind. PEANKIT1011 provides your LongFi radio with the proper components to get the most out of your hotspot with optimized range and increased Proof-of-Coverage over OEM components. The PEANKIT1011 achieves enhanced performance by utilizing Pasternack’s 900 MHz lightweight, low-profile, high-performance Omni-directional antennas designed for the 900 MHz ISM band. These LoRa, LoRaWAN antennas feature all-weather UV-stable fiberglass radome for durability and aesthetics. The PEANKIT1011 comes with a 8 dBi Omni Antenna that operates from 900 MHz to 928 MHz frequency range. Combined with our Low Loss 400 series cable with integrated Lightning Protector, the 400 cable features equal performance and mechanical characteristics to cables from CommScope®, Times Microwave Systems®, Belden® and Andrew®. This 20 ft Low Loss cable comes terminated with an N Male in-line gas discharge tube suppressor, to the antenna, and an RP-SMA Male connector compatible with the leading Hotspot miners on the market. The PEANKIT1011 from Pasternack brings industry proven components direct to the Helium enthusiast, ship worldwide the same day as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
5
|
- 1 $121.9900
- 25 $115.8900
- 50 $109.7900
- 100 $104.9100
- Show All
|
Buy Now
|
|
PE51FP1011
D#: PE51FP1011
|
Pasternack Enterprises
|
Key Specifications, Antenna Type: Panel, Polarization: Vertical or Horizontal, Connector 1 Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 1.8:1. 4.9-5.8 GHz 19dBi Dual Polarized Panel Antenna. Panel antenna PE51FP1011 from Pasternack (sometimes known as a patch antenna) is part of our extensive in-stock RF directional antenna selection. This wide band panel / patch antenna has a frequency range of and a nominal dBi gain. Our patch panel antenna uses type N female connector and is rated for 10 Watts input. PE51FP1011 radio frequency panel / patch antenna is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our panel aerial can ship worldwide the same day of the purchase as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $227.9900
- 25 $216.5900
- 50 $205.1900
- 100 $196.0700
- Show All
|
Buy Now
|
|
PE85N1011
D#: PE85N1011
|
Pasternack Enterprises
|
Key Specifications, DC Input Connector Series: Pin, Impedance: 50 Ohm, RF Output Connector Series: SMA, RF Output Gender: Female, Minimum Frequency: 10 MHz, Maximum Frequency: 2 GHz. SMA Amplified Noise Source Module, Output Pout of 0 dBm, +15 VDC, 10 MHz to 2 GHz. PE85N1011 is a RF noise source generator from Pasternack that is manufactured to precise radio frequency component standards. This RF noise generator is an in-line connectorized component design with a noise output ENR of dB. Our coaxial standard power RF generator is constructed with SMA connectors and has a frequency range of 10 MHz for the minimum and 2 GHz for the maximum. Our SMA RF noise generator source PE85N1011 is part of more than 40,000 RF, microwave and millimeter wave component from supplier Pasternack. This noise generator source for RF is in-stock at our ISO 9001:2008 facility in Irvine, CA. Pasternack is where to buy your RF generator component for same day shipping throughout the United States and internationally, as with all other Pasternack RF parts.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $5,570.0000
- 5 $5,347.2000
- 10 $5,124.4000
|
Buy Now
|
Microchip Technology Inc 
Rochester Electronics 
SiTime Corporation 
TE Connectivity 
Flip Electronics 
Bristol Electronics 
Waytek, Inc. 
Ameya Holding Limited 
North Star Micro Electronics 
DST International Group (HK) Limited 
Component Stockers 
Microchip USA 
Bisco Industries 
Hermes Engineering 
Unikey Electronic Pte Ltd 
PEI Genesis 
Time Way Electronics Limited 
Kepictronics Inc. 
ICMILES Electronics Ltd 
DB Roberts 
Interstate Connecting Components 
NAC 
Richardson RFPD 
ComSIT USA 
Powell Electronics 
PUI 
Dynamic Solutions GmbH 
Kurrent Technology 
L-com US 
Chip-Germany GmbH 
Sensible Micro Corporation 
Sager 
IBS Electronics 
Tencell 
ICHOME Technology 
EBV Elektronik 
ICHOT TECHNOLOGY LIMITED 
Avnet Abacus 
GlobalTek Components 
LCSC 
Perfect Parts Corporation 
Unicom Electronics 
New Advantage Corporation 
Win Source Electronics 
Pasternack Enterprises US 
IC Components Limited 
Shengyu Electronics Technology Limited 
Chip Stock 
Vyrian 
R&J Components 
Avnet Silica 
Sense Electronic Company Limited 
Unibetter Technology Co., Ltd 
Silitech Components Inc. 
NexGen Digital
Greenchips 
MountainView Components Inc. 
YIC International Co., Limited 
Tedss 
Rutronik 
Sierra IC 
Cytech Systems Limited 
New Strength Electronic Co., Limited 
ACDS 
LIBRA Elektronik GmbH 
Neutron USA 
Venkel Ltd. 
Futuretech Components Ltd