|
PEWAN102-15ELSF
D#: PEWAN102-15ELSF
|
Pasternack Enterprises
|
Key Specifications, Waveguide Size: WR-102, Gain Min: 15, Beam Width, 3dB V: 31, Beam Width, 3dB H: 32, Frequency, Min: 7 GHz, Frequency, Max: 11 GHz. WR-102 Standard Gain Horn with 15 dBi gain, End Launch SMA Female connector. PEWAN102-15ELSF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack standard gain horn antenna is manufactured with a WR-102 input and a waveguide to coaxial transition adapter. Our WR-102 standard gain horn antenna has a waveguide to coax adapter transition with a SMA connector input that is female gender. WR-102 standard gain horn waveguide antenna with SMA input has a minimum frequency of 7 GHz and a maximum frequency of 11 GHz. Pasternack PEWAN102-15ELSF WR-102 waveguide horn standard gain antenna is rated at a nominal 15 dB gain. Our 15 dB standard gain horn WR-102 waveguide antenna with SMA adapter has a vertical beam width of 31 and horizontal of 32 degrees at 3 dB. Pasternack is where to buy a WR-102 standard waveguide gain horn antenna with WR-102 input. This gain horn antenna is just one part of over 40,000 RF, microwave and millimeter wave guide components available and in-stock at our Irvine, CA United States warehouse. Our WR-102 standard waveguide horn antenna with SMA female interface can ship worldwide the same day that it is purchased as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
4
|
- 1 $1,650.0000
- 5 $1,584.0000
- 10 $1,518.0000
- 25 $1,452.0000
- Show All
|
Buy Now
|
|
PEWAT1021-10
D#: PEWAT1021-10
|
Pasternack Enterprises
|
Key Specifications, Waveguide Size: WR-34, Attenuation, Nominal: 10 dB, Attenuation, Typical: 0.7 dB, Flange Size: UG-1530/U, Minimum Frequency: 21.7 GHz, Maximum Frequency: 33 GHz, Maximum Power: 0.5 W. WR-34 Waveguide Fixed Attenuator, 10 dB, from 21.7 GHz to 33 GHz, UG-1530/U Square Cover Flange, Rated to 0.5 Watt. Pasternack’s PEWAT1021-10 is a waveguide fixed attenuator built to operate in full WR-34 band. This WR-34 waveguide attenuator comes with a grey paint finish and a maximum VSWR of 1.25:1. Our waveguide fixed attenuator is rated for a minimum frequency of 21.7 GHz and a maximum frequency of 33 GHz. Make your online purchase right now to take advantage of our same-day shipping. The PEWAT1021-10 WR-34 interface waveguide fixed attenuator from Pasternack is constructed with gold-plated brass copper material. This waveguide attenuator has an overall length of 2.76 inches, a width of 0.87 inches and weighs 0.13 lbs. Our PEWAT1021-10 WR-34 waveguide fixed attenuator is rated for 0.7 of typical attenuation accuracy. This waveguide fixed attenuator from Pasternack is designed with a UG-1530/U flange. The PEWAT1021-10 waveguide fixed attenuator is rated for maximum input power (CW) of 0.5 Watts along with 10 dB of nominal attenuation. Additional dimensions and specifications for this fixed waveguide attenuator are in our downloadable PDF datasheet. Pasternack’s WR-34 interface waveguide fixed attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 21.7 GHz waveguide fixed attenuator that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $880.0000
- 5 $844.8000
- 10 $809.6000
- 25 $774.4000
- Show All
|
Buy Now
|
|
PEWAN102-10NM
D#: PEWAN102-10NM
|
Pasternack Enterprises
|
Key Specifications, Waveguide Size: WR-102, Gain Min: 10, Beam Width, 3dB V: 52.1, Beam Width, 3dB H: 51.6, Frequency, Min: 7 GHz, Frequency, Max: 11 GHz. WR-102 Standard Gain Horn with 10 dBi gain, N Male connector. PEWAN102-10NM standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack standard gain horn antenna is manufactured with a WR-102 input and a waveguide to coaxial transition adapter. Our WR-102 standard gain horn antenna has a waveguide to coax adapter transition with a type N connector input that is male gender. WR-102 standard gain horn waveguide antenna with type N input has a minimum frequency of 7 GHz and a maximum frequency of 11 GHz. Pasternack PEWAN102-10NM WR-102 waveguide horn standard gain antenna is rated at a nominal 10 dB gain. Our 10 dB standard gain horn WR-102 waveguide antenna with type N adapter has a vertical beam width of 52.1 and horizontal of 51.6 degrees at 3 dB. Pasternack is where to buy a WR-102 standard waveguide gain horn antenna with WR-102 input. This gain horn antenna is just one part of over 40,000 RF, microwave and millimeter wave guide components available and in-stock at our Irvine, CA United States warehouse. Our WR-102 standard waveguide horn antenna with N type male interface can ship worldwide the same day that it is purchased as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $1,600.0000
- 5 $1,536.0000
- 10 $1,472.0000
- 25 $1,408.0000
- Show All
|
Buy Now
|
|
PEWAN102-15NM
D#: PEWAN102-15NM
|
Pasternack Enterprises
|
Key Specifications, Waveguide Size: WR-102, Gain Min: 15, Beam Width, 3dB V: 31, Beam Width, 3dB H: 32, Frequency, Min: 7 GHz, Frequency, Max: 11 GHz. WR-102 Standard Gain Horn with 15 dBi gain, N Male connector. PEWAN102-15NM standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack standard gain horn antenna is manufactured with a WR-102 input and a waveguide to coaxial transition adapter. Our WR-102 standard gain horn antenna has a waveguide to coax adapter transition with a type N connector input that is male gender. WR-102 standard gain horn waveguide antenna with N type input has a minimum frequency of 7 GHz and a maximum frequency of 11 GHz. Pasternack PEWAN102-15NM WR-102 waveguide horn standard gain antenna is rated at a nominal 15 dB gain. Our 15 dB standard gain horn WR-102 waveguide antenna with type N adapter has a vertical beam width of 31 and horizontal of 32 degrees at 3 dB. Pasternack is where to buy a WR-102 standard waveguide gain horn antenna with WR-102 input. This gain horn antenna is just one part of over 40,000 RF, microwave and millimeter wave guide components available and in-stock at our Irvine, CA United States warehouse. Our WR-102 standard waveguide horn antenna with type N male interface can ship worldwide the same day that it is purchased as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $1,650.0000
- 5 $1,584.0000
- 10 $1,518.0000
- 25 $1,452.0000
- Show All
|
Buy Now
|
|
PE1V31021
D#: PE1V31021
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $459.7900
- 10 $441.4000
- 25 $423.0100
- 100 $404.6200
- Show All
|
Buy Now
|
|
PE3W10214LF/HS
D#: PE3W10214LF/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Blue FAKRA Jack to BNC Female Bulkhead Cable Using LMR-100 Coax with HeatShrink, LF Solder. PE3W10214LF/HS is a FAKRA jack to BNC female bulkhead cable using LMR-100A coax. This Pasternack FAKRA jack to BNC female bulkhead cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm BNC for connector 2. Our jack FAKRA to female BNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10214LF/HS FAKRA jack to BNC female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W10218/HS
D#: PE3W10218/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to Push-On SMP Female Right Angle Cable Using RG316 Coax with HeatShrink. PE3W10218/HS is a TNC female bulkhead to SMP female right angle cable using RG316 coax. This Pasternack TNC female bulkhead to SMP female right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMP for connector 2. TNC to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female TNC bulkhead to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10218/HS TNC female bulkhead to SMP female right angle cable assembly is constructed with RG316 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W10213
D#: PE3W10213
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMP Female Right Angle to MMCX Jack Cable Using PE-SR405FLJ Coax., Radio frequency assembly SMP female right angle to MMCX jack cable using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to MMCX jack cable using PE-SR405FLJ coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and MMCX cable connection on the other. Our right angle SMP to MMCX cable assemblies have a female gender on end 1 and jack on end 2. This SMP to MMCX cable is a female to jack coax assembly, PE3W10213, can also be known as a right angle SMP jack to MMCX female cable assembly and will be shipped same-day as it is purchased. SMP jack to MMCX female cable assembly PE3W10213 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMP right angle female to MMCX jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10213 can also be used in the other direction and will be MMCX jack to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to MMCX female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to MMCX cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to MMCX jack cable using PE-SR405FLJ coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W10213-9
D#: PE3W10213-9
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMP Female Right Angle to MMCX Jack Cable 9 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMP female right angle to MMCX jack cable 9 inch length using PE-SR405FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMP female right angle to MMCX jack cable 9 inch length using PE-SR405FLJ coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and MMCX cable connection on the other. Our right angle SMP to MMCX cable assemblies have a female gender on end 1 and jack on end 2. This SMP to MMCX cable is a female to jack coax assembly, PE3W10213-9, can also be known as a right angle SMP jack to MMCX female cable assembly and will be shipped same-day as it is purchased. SMP jack to MMCX female cable assembly PE3W10213-9 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMP right angle female to MMCX jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10213-9 can also be used in the other direction and will be MMCX jack to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to MMCX female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to MMCX cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to MMCX jack cable 9 inch length using PE-SR405FLJ coax.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $113.9900
- 25 $108.2900
- 50 $102.5900
- 100 $98.0300
- Show All
|
Buy Now
|
|
PEWAN102-10SM
D#: PEWAN102-10SM
|
Pasternack Enterprises
|
Key Specifications, Waveguide Size: WR-102, Gain Min: 10, Beam Width, 3dB V: 52.1, Beam Width, 3dB H: 51.6, Frequency, Min: 7 GHz, Frequency, Max: 11 GHz. WR-102 Standard Gain Horn with 10 dBi gain, SMA Male connector. PEWAN102-10SM standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack standard gain horn antenna is manufactured with a WR-102 input and a waveguide to coaxial transition adapter. Our WR-102 standard gain horn antenna has a waveguide to coax adapter transition with a SMA connector input that is male gender. WR-102 standard gain horn waveguide antenna with SMA input has a minimum frequency of 7 GHz and a maximum frequency of 11 GHz. Pasternack PEWAN102-10SM WR-102 waveguide horn standard gain antenna is rated at a nominal 10 dB gain. Our 10 dB standard gain horn WR-102 waveguide antenna with SMA adapter has a vertical beam width of 52.1 and horizontal of 51.6 degrees at 3 dB. Pasternack is where to buy a WR-102 standard waveguide gain horn antenna with WR-102 input. This gain horn antenna is just one part of over 40,000 RF, microwave and millimeter wave guide components available and in-stock at our Irvine, CA United States warehouse. Our WR-102 standard waveguide horn antenna with SMA male interface can ship worldwide the same day that it is purchased as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $1,600.0000
- 5 $1,536.0000
- 10 $1,472.0000
- 25 $1,408.0000
- Show All
|
Buy Now
|
Microchip Technology Inc 
Rochester Electronics 
TE Connectivity 
SiTime Corporation 
Master Electronics 
Coilcraft Direct 
Flip Electronics 
Bristol Electronics 
ComSIT USA 
Time Way Electronics Limited 
Component Stockers 
Tencell 
Microchip USA 
Interstate Connecting Components 
ICHOME Technology 
Sensible Micro Corporation 
Richardson RFPD 
Ameya Holding Limited 
Kepictronics Inc. 
PUI 
DB Roberts 
Unikey Electronic Pte Ltd 
Hermes Engineering 
ChipNobo Co., Limited 
PEI Genesis 
IBS Electronics 
Component Solutions, Inc. 
Quest Components 
Powell Electronics 
Kurrent Technology 
ICMILES Electronics Ltd 
North Star Micro Electronics 
Sager 
Component Search 
AERI 
Chip-Germany GmbH 
Waytek, Inc. 
Dynamic Solutions GmbH 
NAC 
L-com US 
GlobalTek Components 
Pasternack Enterprises US 
Unibetter Technology Co., Ltd 
Cytech Systems Limited 
Utmel Electronic 
RG Elektrotechnologie GmbH 
ICHOT TECHNOLOGY LIMITED 
IC Components Limited 
R&J Components 
YIC International Co., Limited 
LIBRA Elektronik GmbH 
Perfect Parts Corporation 
Vyrian 
Avnet Silica 
New Advantage Corporation 
Avnet Abacus 
Futuretech Components Ltd 
Greenchips 
Chip Stock 
Win Source Electronics 
Unicom Electronics 
LCSC 
Neutron USA 
Sierra IC 
ACDS 
Rutronik 
Tedss 
EBV Elektronik 
Venkel Ltd. 
Shengyu Electronics Technology Limited 
Sense Electronic Company Limited 
MountainView Components Inc. 
NexGen Digital
Silitech Components Inc.