|
PE3C1028-36
D#: PE3C1028-36
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to N Male Right Angle Low Loss Cable 36 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male to N male right angle low loss cable 36 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 36 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE3C1028-36 can also be known as a low loss type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C1028-36 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1028-36 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 36 inch length using LMR-400-UF coax.
Min Qty:
1
Package Multiple:
1
|
534
|
- 1 $139.9900
- 25 $132.9900
- 50 $125.9900
- 100 $120.3900
- Show All
|
Buy Now
|
|
PE3C1028-60
D#: PE3C1028-60
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Right Angle Low Loss Cable 60 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male to N male right angle low loss cable 60 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 60 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE3C1028-60 can also be known as a low loss N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C1028-60 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1028-60 can also be used in the other direction and will be right angle N type male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 60 inch length using LMR-400-UF coax.
Min Qty:
1
Package Multiple:
1
|
534
|
- 1 $143.9900
- 25 $136.7900
- 50 $129.5900
- 100 $123.8300
- Show All
|
Buy Now
|
|
PE3W10285-12
D#: PE3W10285-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: FME, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. FME Jack to N Male Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly FME jack to N male cable 12 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The FME jack to N male cable 12 inch length using RG58 coax, FME cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and N type cable connection on the other. Our FME to type N cable assemblies have a jack gender on end 1 and male on end 2. PE3W10285-12 can also be known as a FME female to type N plug cable assembly and will be shipped same-day as it is purchased. FME female to N type plug cable assembly PE3W10285-12 is built with RG58 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10285-12 can also be used in the other direction and will be N type male to FME jack cable assembly if the opposite connectivity is required. FME female to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to type N cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to N male cable 12 inch length using RG58 coax.
Min Qty:
1
Package Multiple:
1
|
435
|
- 1 $87.9900
- 25 $83.5900
- 50 $79.1900
- 100 $75.6700
- Show All
|
Buy Now
|
|
PE3CA1028-3
D#: PE3CA1028-3
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.1, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 3 inches. SMA Male to UMCX 2.1 Plug Cable 3 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly SMA male to UMCX 2.1 plug cable 3 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to UMCX 2.1 plug cable 3 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.1 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and UMCX 2.1 cable connection on the other. Our SMA to UMCX 2.1 cable assemblies have a male gender on end 1 and plug on end 2. This SMA to UMCX 2.1 cable is a male to plug coax assembly, PE3CA1028-3, can also be known as a SMA plug to UMCX 2.1 male cable assembly and will be shipped same-day as it is purchased. SMA plug to UMCX 2.1 male cable assembly PE3CA1028-3 is built with 0.81mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX 2.1 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to UMCX 2.1 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1028-3 can also be used in the other direction and will be UMCX 2.1 plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to UMCX 2.1 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.1 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to UMCX 2.1 plug cable 3 inch length using 0.81mm coax, RoHS.
Min Qty:
1
Package Multiple:
1
|
29
|
- 1 $29.5900
- 25 $28.1100
- 50 $26.6300
- 100 $25.4500
- Show All
|
Buy Now
|
|
PEANFP1028
D#: PEANFP1028
|
Pasternack Enterprises
|
Key Specifications. Antenna Type Flat Panel Polarization RHCP Minimum Frequency 902 MHz Maximum Frequency 928 MHz Connector 1 Polarity Reverse Polarity Connector Series TNC Connector Gender Male Impedance 50 Ohm Maximum Input VSWR 1.3:1, Pasternack's PEANFP1028 is a Directional RFID flat panel RHCP antenna. The PEANFP1028 with a 10 dBi gain nominal is a Directional antenna. Our 902-928 MHz RP TNC male connector, flat panel antenna has a gain of 10 dBi. With an impedance of 50 Ohms and max input power of 20 Watts, the PEANFP1028 RFID flat panel is well suited for Radio Frequency Identification tag reading applications. Contact Pasternack's antenna experts for any assistance on 902-928 MHz, 10 dBi RP TNC male connector antennas. This 10 dBi gain RFID antenna is highly directional providing the reader radio the capabilities of simultaneously reading a multitude of RFID tags with a high degree of accuracy. Pasternack's RFID PEANFP1028 has a radome made of PVC in White color and comes from a facility certified to ISO 9001:2015. This Reverse Polarity TNC connectized Antenna has an overall length of 18 in, width of 6 in, and weighs 2.42 lbs. Use our on-line ordering system to purchase your PEANFP1028 RFID Directional RHCP antenna 24 hours a day with same-day shipping and no MOQs (minimum order quantities).
Min Qty:
1
Package Multiple:
1
|
11
|
- 1 $231.9900
- 25 $220.3900
- 50 $208.7900
- 100 $199.5100
- Show All
|
Buy Now
|
|
PE15A1028
D#: PE15A1028
|
Pasternack Enterprises
|
Key Specifications, Gain: 40 dB, Power Output: 12 dBm P1dB, Frequency, Min: 1.2 GHz, Frequency, Max: 1.6 GHz, Noise Figure, Max: 0.8 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 120 mA, Connector Series: SMA. 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA. PE15A1028 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 1.2 GHz and maximum frequency of 1.6 GHz. The significantly low noise figure of this radio frequency amplifier is 0.8 dB with a typical gain of 40 dB. LNA amplifier PE15A1028 is rated at 15 Volts DC maximum and 120 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
8
|
- 1 $1,040.0000
- 5 $998.4000
- 10 $956.8000
|
Buy Now
|
|
PE2CP1028
D#: PE2CP1028
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
6
|
- 1 $708.7500
- 5 $680.4000
- 10 $652.0500
|
Buy Now
|
|
PE3C10280-24
D#: PE3C10280-24
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Plenum BNC Male to SMA Male Low Loss Cable 24 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to SMA male low loss cable 24 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to SMA male low loss cable 24 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss a BNC to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10280-24 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10280-24 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack BNC cable assembly is manufactured with BNC to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10280-24 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $56.9900
- 10 $55.8500
- 25 $54.7100
- 100 $53.5700
- Show All
|
Buy Now
|
|
PE3C10280-48
D#: PE3C10280-48
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Plenum BNC Male to SMA Male Low Loss Cable 48 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum BNC male to SMA male low loss cable 48 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum BNC male to SMA male low loss cable 48 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss a BNC to a SMA cable assembly has male gender on end 1 and male on end 2. PE3C10280-48 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10280-48 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack BNC cable assembly is manufactured with BNC to SMA cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10280-48 can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $69.9900
- 10 $68.5900
- 25 $67.1900
- 100 $65.7900
- Show All
|
Buy Now
|
|
PE3C10286-60
D#: PE3C10286-60
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-LLPX, RF Cable Type: LMR-240-LLPX, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Plenum SMA Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240-LLPX Coax with Times Microwave Components., Radio frequency assembly plenum SMA male to TNC male low loss cable 60 inch length using LMR-240-LLPX coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The plenum SMA male to TNC male low loss cable 60 inch length using LMR-240-LLPX coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss a SMA to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10286-60 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10286-60 RF cable has a Fluoropolymer jacket of 0.214-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The RF cable has a between series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 90 dB. The Pasternack SMA cable assembly is manufactured with SMA to TNC cable connectors and has a 50 Ohm impedance. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10286-60 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $85.9900
- 10 $84.2700
- 25 $82.5500
- 100 $80.8300
- Show All
|
Buy Now
|
Microchip Technology Inc 
Rochester Electronics 
TE Connectivity 
Flip Electronics 
Kepictronics Inc. 
Waytek, Inc. 
ComSIT USA 
Ameya Holding Limited 
Interstate Connecting Components 
Sager 
Time Way Electronics Limited 
Sensible Micro Corporation 
Powell Electronics 
Bristol Electronics 
Tencell 
Component Stockers 
Bisco Industries 
Axis Part Limited 
DB Roberts 
PUI 
Allelco Limited 
Kurrent Technology 
Component Search 
ICMILES Electronics Ltd 
PEI Genesis 
L-com US 
NAC 
Richardson RFPD 
Microchip USA 
AERI 
North Star Micro Electronics 
Dynamic Solutions GmbH 
GlobalTek Components 
YIC International Co., Limited 
IC Components Limited 
Vyrian 
Tedss 
Sierra IC 
Silitech Components Inc. 
Sense Electronic Company Limited 
Chip Stock 
Shengyu Electronics Technology Limited 
New Strength Electronic Co., Limited 
Avnet Silica 
Chips Pulse Industry Limited 
Braemac Americas-Symmetry 
ICHOT TECHNOLOGY LIMITED 
Greenchips 
Pasternack Enterprises US 
LIBRA Elektronik GmbH 
ACDS 
NexGen Digital
Win Source Electronics 
Perfect Parts Corporation 
EBV Elektronik 
LCSC 
Neutron USA 
New Advantage Corporation 
Cytech Systems Limited 
Briocean Technology Co.,Ltd. 
Venkel Ltd. 
Avnet Abacus