|
PE3W10519
D#: PE3W10519
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. TNC Male to TNC Female Bulkhead Cable Using RG174 Coax., Radio frequency assembly TNC male to TNC female bulkhead cable using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to TNC female bulkhead cable using RG174 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC bulkhead cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and female on end 2. PE3W10519 can also be known as a TNC plug to TNC jack cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC jack cable assembly PE3W10519 is built with RG174 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency TNC male to TNC female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10519 can also be used in the other direction and will be TNC female bulkhead to TNC male cable assembly if the opposite connectivity is required. TNC plug to TNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC female bulkhead cable using RG174 coax.
Min Qty:
1
Package Multiple:
1
|
1520
|
|
Buy Now
|
|
PE3W10511
D#: PE3W10511
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMC, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMC Jack to TNC Male Cable Using RG174 Coax. PE3W10511 is a SMC jack to TNC male cable using RG174 coax. This Pasternack SMC jack to TNC male cable assembly uses a 50 Ohm SMC for connector 1 and a 50 Ohm TNC for connector 2. Our jack SMC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10511 SMC jack to TNC male cable assembly is constructed with RG174 coax.
Min Qty:
1
Package Multiple:
1
|
140
|
|
Buy Now
|
|
PE3M0105-18
D#: PE3M0105-18
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/119-RG174-0XDS2, RF Cable Type: M17/119-RG174, RF Cable Impedance: 50 Ohm, Length: 18 inches. MIL-DTL-17 SMA Male to SMA Male Cable 18 Inch Length Using M17/119-RG174 Coax., Radio frequency assembly MIL-DTL-17 SMA male to SMA male cable 18 inch length using M17/119-RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to SMA male cable 18 inch length using M17/119-RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3026 SMA to M39012/55-3026 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3026 SMA cable connection on one end and M39012/55-3026 SMA cable connection on the other. Our M39012/55-3026 SMA to M39012/55-3026 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3026 SMA to M39012/55-3026 SMA cable is a male to male coax assembly, PE3M0105-18, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3026 SMA plug to M39012/55-3026 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3026 SMA plug to M39012/55-3026 SMA plug cable assembly PE3M0105-18 is built with M17/119-RG174 which is a flexible coax type. The Pasternack flexible M39012/55-3026 SMA cable assembly is manufactured with M39012/55-3026 SMA to M39012/55-3026 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/55-3026 SMA male to M39012/55-3026 SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. M39012/55-3026 SMA plug to M39012/55-3026 SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3026 SMA to M39012/55-3026 SMA cable assembly for quick shipment worldwide. Variations of M39012/55-3026 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to SMA male cable 18 inch length using M17/119-RG174 coax.
Min Qty:
1
Package Multiple:
1
|
52
|
- 1 $226.5900
- 25 $215.2600
- 50 $203.9300
|
Buy Now
|
|
PE51OM1051
D#: PE51OM1051
|
Pasternack Enterprises
|
Key Specifications, Polarization: Vertical, Minimum Frequency: 2.4 GHz, Maximum Frequency: 2.5 GHz, Connector Series: N, Connector Gender: Male, Impedance: 50 Ohm, The PE51OM1051 from the Pasternack antenna is high performance outdoor omnidirectional antenna specifically designed for cellular networks. This PE51OM1051 outdoor antenna is an economically rugged omnidirectional antenna that provides high reliability due to its fiberglass radome. This Omni antenna has a 12 dBi gain and 2400 to 2500 MHz frequency range that offers great coverage for rural areas or difficult-to-cover areas. The 2400 to 2500 MHz frequency range omnidirectional antenna has coverage of Wi-Fi, CBRS bands4G, LTE, 5G, and CBRS bands. The PE51OM1051 omnidirectional antenna has vertical polarization with a cable length of 47.244 inches. All the components in the omnidirectional fiberglass antenna is DC grounded for lightning protection. The 12 dBi high gain omnidirectional outdoor-rated antenna has 360 degrees of coverage to offer range extension and simple deployment to build Wi-Fi and cellular communication networks. This 2400 to 2500 MHz Omni antenna has N-type Female connectors that makes installation easy and fast allowing for rapid time to on air activation. The versatile N-type Female connector option in the Omni antenna allows direct connections to the radios and is fit where high coverage is required and traditional base station antennas are too bulky. Pasternack has a stock of PE51OM1051 antenna with same-day shipping. The weatherproof fiberglass omnidirectional antenna has 100 W maximum power handling capability and covers all telecom needs. For further information on similar products, search this website or contact our expert technical support who would be happy to guide you to the perfect 2400 to 2500 MHz, 12 dBi gain omnidirectional antenna for your requirement.
Min Qty:
1
Package Multiple:
1
|
10
|
- 1 $131.9900
- 25 $125.3900
- 50 $118.7900
- 100 $113.5100
- Show All
|
Buy Now
|
|
PE3C10105-18
D#: PE3C10105-18
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. NEX10 Male to NEX10 Male Low PIM Cable 18 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 18 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 18 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will the ship same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM a NEX10 to a NEX10 cable assembly has male gender on end 1 and male on end 2. PE3C10105-18 can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for general purpose, laboratory use and low pim applications. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10105-18 RF cable has a FEP jacket of 0.161-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 150 degrees C. The formable RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. NEX10 plug to NEX10 plug cable assembly PE3C10105-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack low passive intermodulation formable NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors and has a 50 Ohm impedance. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
5
|
- 1 $117.9900
- 25 $112.0900
- 50 $106.1900
- 100 $101.4700
- Show All
|
Buy Now
|
|
PE70A1051N
D#: PE70A1051N
|
Pasternack Enterprises
|
Key Specifications, Design: Step, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 2 Watt, VSWR Maximum: 1.65:1, Connector Series 1: N, Connector Gender 1: Female, Connector Series 2: N, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 70 dB. 0 to 70 dB Benchtop Rotary Step Attenuator, N Female to N Female with 1 dB Step Rated to 2 Watts Up to 6 GHz., PE70A1051N is a benchtop rotary step attenuator from Pasternack. This threaded type N step attenuator is constructed to precise RF and microwave industry specifications and operates at a maximum frequency of 6 GHz. Our in-series bidirectional step RF attenuator has a maximum attenuation value of 70 dB with a 1 dB step size. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this attenuator is 2 Watts. This bidirectional type N step attenuator from Pasternack has a female gender for in and out ports. Our PE70A1051N in-series RF attenuator comes with a 50 Ohm impedance. This 70 dB radio frequency attenuator with type N connectors is constructed with aluminum body material and has a gold-plated beryllium copper inner conductor. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our in-series passive RF attenuator can operate at temperatures ranging from -20 to 85 deg C. The 70 dB attenuator from Pasternack has a brass connector built with nickel plating. Our PE70A1051N bidirectional step attenuator has a maximum input VSWR of 1.65:1. This type N female step attenuator has a length of 7.5 inches, a width of 3.43 inches, and a weight of 1 lbs. This Pasternack benchtop rotary step attenuator will ship the same business day as purchased. Our type N female radio frequency attenuator is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal step attenuator as per your requirements.
Min Qty:
1
Package Multiple:
1
|
3
|
- 1 $2,850.0000
- 5 $2,793.0000
- 10 $2,736.0000
- 25 $2,679.0000
- Show All
|
Buy Now
|
|
PE83IR1051
D#: PE83IR1051
|
Pasternack Enterprises
|
Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Minimum Frequency: 12 GHz, Maximum Frequency: 15 GHz, Impedance: 50 Ohm, Maximum Insertion Loss: 0.4 dB, Maximum Input Power: 10 Watts, Minimum Isolation: 21 dB. Isolator with 21 dB Isolation from 12 to 15 GHz, 10 Watts and SMA Female. Pasternack RF isolator PE83IR1051 is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This RF isolator is manufactured with SMA connectors that are female. Our SMA isolator has a minimum frequency of 12 GHz and a maximum frequency of 15 GHz. This SMA coaxial isolator has a minimum isolation of 21 dB and a maximum input power of 10 Watts. PE83IR1051 coaxial SMA isolator is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our radio frequency isolator can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.
Min Qty:
1
Package Multiple:
1
|
3
|
- 1 $630.0000
- 5 $617.4000
- 10 $604.8000
- 25 $592.2000
- Show All
|
Buy Now
|
|
PEWCT1051
D#: PEWCT1051
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $2,800.0000
- 5 $2,688.0000
- 10 $2,576.0000
|
Buy Now
|
|
PE73SP1051
D#: PE73SP1051
|
Pasternack Enterprises
|
Key Specifications, Impedance: 50 Ohm, Connector In Series: 4.3-10, Connector In Gender: Female, Connector Out Series: 4.3-10, Connector Out Gender: Female, Minimum Frequency: 698 MHz, Maximum Frequency: 2.7 GHz, Maximum Input Power: 500 Watts, Throughput Energy: 0.5 uJ. 4.3-10 F/F In/Out Bulkhead Coax RF Surge Protector, 698MHz - 2.7GHz, DC Block, 500W, IP67, 40kA, Filter, Low PIM -173 dBc. RF surge protector (also known as lightning arrester) PE73SP1051 from Pasternack is manufactured to precise radio frequency component standards for protection from electrical surges. This RF surge protector component in a coaxial in-line design is manufactured with 4.3-10 connectors and they are 50 Ohm. Our in-line coaxial 4.3-10 surge / lightning protector / arrester uses female connectors. Pasternack 4.3-10 lightning surge protector has maximum frequency of 2.7 GHz and a maximum power of 500 watts. PE73SP1051 radio frequency coaxial surge suppressor is part of more than 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our coax lightning electrical surge protector arrester is in stock at our ISO 9001:2008 Irvine, CA facility. Pasternack Enterprises is where to buy your RF surge / lightning protector, arrester and suppression components for same day shipping throughout the United States and internationally as with other Pasternack RF parts.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $213.3900
- 10 $204.8500
- 25 $196.3200
|
Buy Now
|
|
PE3C10510
D#: PE3C10510
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
SiTime Corporation 
Rochester Electronics 
TE Connectivity 
Master Electronics 
Coilcraft Direct 
Flip Electronics 
Axis Part Limited 
Kepictronics Inc. 
Microchip USA 
ICHOME Technology 
DB Roberts 
ICMILES Electronics Ltd 
Quest Components 
Ameya Holding Limited 
North Star Micro Electronics 
Time Way Electronics Limited 
Unikey Electronic Pte Ltd 
Tencell 
L-com US 
ComSIT USA 
Dynamic Solutions GmbH 
Waytek, Inc. 
PEI Genesis 
Bristol Electronics 
NAC 
ChipNobo Co., Limited 
DST International Group (HK) Limited 
Richardson RFPD 
Chip-Germany GmbH 
Powell Electronics 
Sensible Micro Corporation 
Kurrent Technology 
Interstate Connecting Components 
Sager 
Unicom Electronics 
Sierra IC 
Futuretech Components Ltd 
MountainView Components Inc. 
Cytech Systems Limited 
Silitech Components Inc. 
Utmel Electronic 
Avnet Silica 
Chip Stock 
Vyrian 
ACDS 
Sense Electronic Company Limited 
Shengyu Electronics Technology Limited 
Greenchips 
Tedss 
YIC International Co., Limited 
Neutron USA 
New Advantage Corporation 
LCSC 
IC Components Limited 
GlobalTek Components 
Venkel Ltd. 
Win Source Electronics 
ICHOT TECHNOLOGY LIMITED 
EBV Elektronik 
Pasternack Enterprises US 
RG Elektrotechnologie GmbH 
LIBRA Elektronik GmbH 
NexGen Digital
Avnet Abacus