|
PE3CA1057-12
D#: PE3CA1057-12
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: WMCX 1.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: WMCX 1.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 12 inches. WMCX 1.6 Plug to WMCX 1.6 Plug Cable 12 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly WMCX 1.6 plug to WMCX 1.6 plug cable 12 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. WMCX 1.6 plug to WMCX 1.6 plug cable 12 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom WMCX 1.6 to WMCX 1.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with WMCX 1.6 cable connection on one end and WMCX 1.6 cable connection on the other. Our WMCX 1.6 to WMCX 1.6 cable assemblies have a plug gender on end 1 and plug on end 2. This WMCX 1.6 to WMCX 1.6 cable is a plug to plug coax assembly, PE3CA1057-12, can also be known as a WMCX 1.6 male to WMCX 1.6 male cable assembly and will be shipped same-day as it is purchased. WMCX 1.6 male to WMCX 1.6 male cable assembly PE3CA1057-12 is built with 0.81mm which is a flexible coax type. The Pasternack flexible WMCX 1.6 cable assembly is manufactured with WMCX 1.6 to WMCX 1.6 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency WMCX 1.6 plug to WMCX 1.6 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. WMCX 1.6 male to WMCX 1.6 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality WMCX 1.6 to WMCX 1.6 cable assembly for quick shipment worldwide. Variations of WMCX 1.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this WMCX 1.6 plug to WMCX 1.6 plug cable 12 inch length using 0.81mm coax, RoHS.
Min Qty:
1
Package Multiple:
1
|
479
|
- 1 $18.1900
- 25 $17.2800
- 50 $16.3700
- 100 $15.6400
- Show All
|
Buy Now
|
|
PE3W10577-36
D#: PE3W10577-36
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SSMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SSMB Jack to SMA Female Cable 36 Inch Length Using RG178 Coax., Radio frequency assembly SSMB jack to SMA female cable 36 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMB jack to SMA female cable 36 inch length using RG178 coax, SSMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SSMB cable connection on one end and SMA cable connection on the other. Our SSMB to SMA cable assemblies have a jack gender on end 1 and female on end 2. PE3W10577-36 can also be known as a SSMB female to SMA jack cable assembly and will be shipped same-day as it is purchased. SSMB female to SMA jack cable assembly PE3W10577-36 is built with RG178 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with SSMB to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SSMB jack to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10577-36 can also be used in the other direction and will be SMA female to SSMB jack cable assembly if the opposite connectivity is required. SSMB female to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMB to SMA cable assembly for quick shipment worldwide. Variations of SSMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMB jack to SMA female cable 36 inch length using RG178 coax.
Min Qty:
1
Package Multiple:
1
|
457
|
- 1 $151.9900
- 25 $144.3900
- 50 $136.7900
- 100 $130.7100
- Show All
|
Buy Now
|
|
PE3CA1057-6
D#: PE3CA1057-6
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: WMCX 1.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: WMCX 1.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 6 inches. WMCX 1.6 Plug to WMCX 1.6 Plug Cable 6 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly WMCX 1.6 plug to WMCX 1.6 plug cable 6 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. WMCX 1.6 plug to WMCX 1.6 plug cable 6 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom WMCX 1.6 to WMCX 1.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with WMCX 1.6 cable connection on one end and WMCX 1.6 cable connection on the other. Our WMCX 1.6 to WMCX 1.6 cable assemblies have a plug gender on end 1 and plug on end 2. This WMCX 1.6 to WMCX 1.6 cable is a plug to plug coax assembly, PE3CA1057-6, can also be known as a WMCX 1.6 male to WMCX 1.6 male cable assembly and will be shipped same-day as it is purchased. WMCX 1.6 male to WMCX 1.6 male cable assembly PE3CA1057-6 is built with 0.81mm which is a flexible coax type. The Pasternack flexible WMCX 1.6 cable assembly is manufactured with WMCX 1.6 to WMCX 1.6 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency WMCX 1.6 plug to WMCX 1.6 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. WMCX 1.6 male to WMCX 1.6 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality WMCX 1.6 to WMCX 1.6 cable assembly for quick shipment worldwide. Variations of WMCX 1.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this WMCX 1.6 plug to WMCX 1.6 plug cable 6 inch length using 0.81mm coax, RoHS.
Min Qty:
1
Package Multiple:
1
|
325
|
- 1 $12.9900
- 25 $12.3400
- 50 $11.6900
- 100 $11.1700
- Show All
|
Buy Now
|
|
PE2CP1057A
D#: PE2CP1057A
|
Pasternack Enterprises
|
Key Specifications, Directionality: Directional, Connector Series: N, Connector Gender: Female, Minimum Frequency: 380 MHz, Maximum Frequency: 4 GHz, Maximum Input Power: 200 Watt, Coupling Value: 6 dB. Low PIM Directional 6 dB N Coupler To 4 GHz Rated to 200 Watts. RF coupler part number PE2CP1057A from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with type N ports. Our directional coupler design uses type N ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 380 MHz and a maximum frequency of 4 GHz. Directional coupler part # PE2CP1057A is constructed with a coupling value of 6 dB and a coupler directivity of 17 dB. This female type N directional coupler is built with a maximum insertion loss of 0.3 dB and a maximum input power of 200 watts. Our directional coupler design with type N connector is rated for a maximum insertion loss of 0.3 dB and a maximum VSWR of 1.22. Additional female N type coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1057A directional 6 dB type N coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.
Min Qty:
1
Package Multiple:
1
|
3
|
- 1 $800.0000
- 5 $768.0000
- 10 $736.0000
- 25 $704.0000
- Show All
|
Buy Now
|
|
PE15A1057
D#: PE15A1057
|
Pasternack Enterprises
|
Key Specifications, Gain: 20 dB, Power Output: 17 dBm P1dB, Frequency, Min: 20 MHz, Frequency, Max: 1.5 GHz, Noise Figure, Max: 1.5 dB, Design: Low Noise, Voltage, DC Max: 18 Volts, Current, DC Max: 85 mA, Connector Series: SMA. 1 dB NF Low Noise Amplifier, Operating from 20 MHz to 1.5 GHz with 20 dB Gain, 17 dBm P1dB and SMA. PE15A1057 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 20 MHz and maximum frequency of 1.5 GHz. The significantly low noise figure of this radio frequency amplifier is 1.5 dB with a typical gain of 20 dB. LNA amplifier PE15A1057 is rated at 18 Volts DC maximum and 85 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
3
|
- 1 $1,090.0000
- 5 $1,046.4000
- 10 $1,002.8000
|
Buy Now
|
|
PEANFP1057
D#: PEANFP1057
|
Pasternack Enterprises
|
Key Specifications. Antenna Type Flat Panel Polarization RHCP Minimum Frequency 902 MHz Maximum Frequency 928 MHz Connector 1 Polarity Reverse Polarity Connector Series SMA Connector Gender Male Impedance 50 Ohm Maximum Input VSWR 1.5:1. 902 to 928 MHz, RFID Flat Panel Antenna, 3 dBi Gain RP SMA Male, EVA Radome, RHCP. Pasternack's PEANFP1057 is a RHCP RFID flat panel antenna. The PEANFP1057 with a 3 dBi gain nominal is a Directional antenna. Our 902 to 928 MHz antenna has Reverse Polarity SMA Male connector, With an impedance of 50 Ohms and max input power of 20 Watts, the PEANFP1057 flat panel RHCP antenna is well suited for Radio Frequency Identification tag reading applications. This 902-928 MHz 3 dBi gain RFID antenna is highly directional providing the reader radio the capabilities of simultaneously reading a multitude of RFID tags with a high degree of accuracy, Pasternack's RFID PEANFP1057 has a radome made of EVA in Black color and comes from a facility certified to ISO 9001:2015. This RP SMA Male connectized Antenna has an overall length of 11 in, width of 10 in, and weighs 0.4629 lbs. Use our on-line ordering system to purchase your PEANFP1057 RFID Directional RHCP antenna 24 hours a day with same-day shipping and no MOQs (minimum order quantities).
Min Qty:
1
Package Multiple:
1
|
3
|
- 1 $193.9900
- 10 $186.2300
- 25 $178.4700
- 100 $170.7100
- Show All
|
Buy Now
|
|
PE3W11057
D#: PE3W11057
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: 3.5mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 3.5mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C1057-12
D#: PE3C1057-12
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR047FL, RF Cable Type: PE-SR047FL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female to Straight Cut Lead Test Probe Cable 12 Inch Length Using PE-SR047FL Coax., Radio frequency assembly SMA female to straight cut lead test probe cable 12 inch length using PE-SR047FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to straight cut lead test probe cable 12 inch length using PE-SR047FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax test probe cable assembly is built with SMA cable connection on one end and straight cut lead cable connection on the other. Our test probe SMA to straight cut lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to straight cut lead cable is a female to sexless coax assembly, PE3C1057-12, can also be known as a test probe SMA jack to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to straight cut lead sexless cable assembly PE3C1057-12 is built with PE-SR047FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to straight cut lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1057-12 can also be used in the other direction and will be straight cut lead sexless to SMA female cable assembly if the opposite connectivity is required. Test probe SMA jack to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to straight cut lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to straight cut lead test probe cable 12 inch length using PE-SR047FL coax.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $62.9900
- 25 $59.8400
- 50 $56.6900
- 100 $54.1700
- Show All
|
Buy Now
|
|
PE3W01057
D#: PE3W01057
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. N Female Bulkhead to 7/16 DIN Female Bulkhead Cable Using PE-P195 Coax. PE3W01057 is a N female bulkhead to 7/16 DIN female bulkhead cable using PE-P195 coax. This Pasternack N female bulkhead to 7/16 DIN female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our female N bulkhead to female 7/16 DIN bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01057 N female bulkhead to 7/16 DIN female bulkhead cable assembly is constructed with PE-P195 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W10574LF/HS
D#: PE3W10574LF/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Female Bulkhead Cable Using LMR-100 Coax with HeatShrink, LF Solder. PE3W10574LF/HS is a N female bulkhead to N female bulkhead cable using LMR-100A coax. This Pasternack N female bulkhead to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N bulkhead to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10574LF/HS N female bulkhead to N female bulkhead cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
Rochester Electronics 
Master Electronics 
Flip Electronics 
Component Stockers 
Sensible Micro Corporation 
PEI Genesis 
North Star Micro Electronics 
Component Search 
Quest Components 
DB Roberts 
Kurrent Technology 
Ameya Holding Limited 
ICMILES Electronics Ltd 
ComSIT USA 
Bristol Electronics 
Sager 
CDM Electronics 
Waytek, Inc. 
Microchip USA 
Richardson RFPD 
Powell Electronics 
Dynamic Solutions GmbH 
NAC 
Interstate Connecting Components 
Time Way Electronics Limited 
Techni-Tool, Inc. 
JRH Electronics 
ACDS 
Pasternack Enterprises US 
LIBRA Elektronik GmbH 
Tedss 
Cytech Systems Limited 
LCSC 
Avnet Abacus 
GlobalTek Components 
EBV Elektronik 
Sierra IC 
Perfect Parts Corporation 
New Advantage Corporation 
Win Source Electronics 
Avnet Silica 
Neutron USA 
Chip Stock 
R&J Components 
ICHOT TECHNOLOGY LIMITED 
NexGen Digital
Silitech Components Inc. 
Vyrian 
Rutronik