|
PE3C8105-9
D#: PE3C8105-9
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Jack, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 9 inches. SMA Female to Reverse Polarity TNC Jack Bulkhead Cable 9 Inch Length Using RG178 Coax., Radio frequency assembly SMA female to reverse polarity TNC jack bulkhead cable 9 inch length using RG178 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female to reverse polarity TNC jack bulkhead cable 9 inch length using RG178 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and reverse polarity TNC bulkhead cable connection on the other. Our SMA to reverse polarity TNC cable assemblies have a female gender on end 1 and jack on end 2. PE3C8105-9 can also be known as a SMA jack to reverse polarity TNC female cable assembly and will be shipped same-day as it is purchased. SMA jack to reverse polarity TNC female cable assembly PE3C8105-9 is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2 GHz maximum frequency SMA female to reverse polarity TNC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8105-9 can also be used in the other direction and will be reverse polarity TNC jack bulkhead to SMA female cable assembly if the opposite connectivity is required. SMA jack to TNC reverse polarity female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to reverse polarity TNC jack bulkhead cable 9 inch length using RG178 coax.
Min Qty:
1
Package Multiple:
1
|
451
|
- 1 $147.9900
- 25 $140.5900
- 50 $133.1900
- 100 $127.2700
- Show All
|
Buy Now
|
|
PEANRBD1059
D#: PEANRBD1059
|
Pasternack Enterprises
|
Key Specifications, Antenna Type: Rubber Duck, Polarization: Linear, Minimum Frequency: 902 MHz, Maximum Frequency: 928 MHz, Connector 1 Polarity: Reverse Polarity, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. 902 to 928 MHz Rubber Duck Antenna 2.5dBi RP-SMA Male Tilt Swivel. The PEANRBD1059 is a high-quality single-band rubber duck antenna with 2.5 dBi nominal gain and has a frequency range of 902 MHz to 928 MHz. Pastenack’s omnidirectional tilt/swivel rubber duck antenna is 7.72 inches tall and 0.5 inches wide. The PEANRBD1059 rubber duck antenna from Pastenack features a Reverse Polarity SMA Male connector with an input VSWR (voltage standing wave ratio) of 2:1. Pastenack’s linearly polarized antenna can operate at temperatures ranging from -40 °C to 60 °C. This single-band rubber duck antenna is offered with expert technical support, PDF datasheets, and CAD drawings with dimensions and specifications.
Min Qty:
1
Package Multiple:
1
|
234
|
- 1 $13.1900
- 25 $12.5300
- 50 $11.8700
- 100 $11.3400
- Show All
|
Buy Now
|
|
PE3W10599-12
D#: PE3W10599-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SSMA Male to SMA Female Bulkhead Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly SSMA male to SMA female bulkhead cable 12 inch length using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA male to SMA female bulkhead cable 12 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SSMA cable connection on one end and a SMA bulkhead cable connection on the other. Our SSMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10599-12 can also be known as a SSMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of -110 dB. SSMA plug to SMA jack cable assembly PE3W10599-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SSMA cable assembly is manufactured with SSMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10599-12 can also be used in the other direction and will be a SMA female bulkhead to SSMA male cable assembly if the opposite connectivity is required. SSMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SMA cable assembly for quick shipment worldwide. Variations of SSMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SMA RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
42
|
- 1 $73.9900
- 25 $70.2900
- 50 $66.5900
- 100 $63.6300
- Show All
|
Buy Now
|
|
PE3W10599-24
D#: PE3W10599-24
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SSMA Male to SMA Female Bulkhead Cable 24 Inch Length Using RG405 Coax., Radio frequency assembly SSMA male to SMA female bulkhead cable 24 inch length using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA male to SMA female bulkhead cable 24 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SSMA cable connection on one end and a SMA bulkhead cable connection on the other. Our SSMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10599-24 can also be known as a SSMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of -110 dB. SSMA plug to SMA jack cable assembly PE3W10599-24 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SSMA cable assembly is manufactured with SSMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10599-24 can also be used in the other direction and will be a SMA female bulkhead to SSMA male cable assembly if the opposite connectivity is required. SSMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SMA cable assembly for quick shipment worldwide. Variations of SSMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SMA RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
42
|
- 1 $86.9900
- 25 $82.6400
- 50 $78.2900
- 100 $74.8100
- Show All
|
Buy Now
|
|
PE3W10599-36
D#: PE3W10599-36
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SSMA Male to SMA Female Bulkhead Cable 36 Inch Length Using RG405 Coax., Radio frequency assembly SSMA male to SMA female bulkhead cable 36 inch length using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA male to SMA female bulkhead cable 36 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SSMA cable connection on one end and a SMA bulkhead cable connection on the other. Our SSMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3W10599-36 can also be known as a SSMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of -110 dB. SSMA plug to SMA jack cable assembly PE3W10599-36 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SSMA cable assembly is manufactured with SSMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W10599-36 can also be used in the other direction and will be a SMA female bulkhead to SSMA male cable assembly if the opposite connectivity is required. SSMA plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SMA cable assembly for quick shipment worldwide. Variations of SSMA and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SMA RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
42
|
- 1 $98.9900
- 25 $94.0400
- 50 $89.0900
- 100 $85.1300
- Show All
|
Buy Now
|
|
PEWCP1059
D#: PEWCP1059
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
4
|
- 1 $660.0000
- 5 $633.6000
- 10 $607.2000
|
Buy Now
|
|
PE20DV1059
D#: PE20DV1059
|
Pasternack Enterprises
|
Key Specifications, Connector Series In: 2.92mm, Connector Gender In: Female, Minimum Frequency: 1 GHz, Maximum Frequency: 40 GHz, Number of Output Ports: 2 Port, Impedance: 50 Ohm, Maximum Input Power: 20 Watt. 2 Way 2.92mm Power Divider from 1 GHz to 40 GHz Rated at 20 Watts. PE20DV1059 2 way 2.92mm power divider (also known as a 2.92mm coaxial power splitter) is rated for a minimum frequency of 1 GHz and a maximum frequency of 40 GHz. This Pasternack 2 port 2.92mm power divider / coaxial splitter has a 50 Ohm impedance and a maxium input power of 20 Watts. Our 2.92mm coaxial RF splitter / divider has a female 2.92mm input and 2 female 2.92mm output ports. This 2 way 2.92mm RF power divider from Pasternack is a wilkinson design and has a maximum insertion loss of 1.2. The maximum input VSWR of this 2.92mm wilkinson splitter / divider is and the minimum isolation is 0 dB. Our 2 port 2.92mm power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This wilkinson 2 way 2.92mm female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $1,935.0000
- 5 $1,857.6000
- 10 $1,780.2000
- 25 $1,702.8000
- Show All
|
Buy Now
|
|
PE3W10597LF/HS
D#: PE3W10597LF/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. N Female Bulkhead to QMA Male Cable Using LMR-195 Coax with HeatShrink, LF Solder. PE3W10597LF/HS is a N female bulkhead to QMA male cable using LMR-195 coax. This Pasternack N female bulkhead to QMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. Our female N bulkhead to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10597LF/HS N female bulkhead to QMA male cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C10597
D#: PE3C10597
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C10590
D#: PE3C10590
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
Rochester Electronics 
TE Connectivity 
SiTime Corporation 
Flip Electronics 
NAC 
ComSIT USA 
Dynamic Solutions GmbH 
Component Stockers 
Kepictronics Inc. 
Bristol Electronics 
Time Way Electronics Limited 
Kurrent Technology 
L-com US 
Powell Electronics 
ICMILES Electronics Ltd 
PEI Genesis 
Sager 
Blume Elektronik Distribution GmbH 
DB Roberts 
Richardson RFPD 
Sensible Micro Corporation 
Allelco Limited 
Microchip USA 
Ameya Holding Limited 
Interstate Connecting Components 
Bisco Industries 
North Star Micro Electronics 
Axis Part Limited 
Win Source Electronics 
Cytech Systems Limited 
RG Elektrotechnologie GmbH 
New Advantage Corporation 
Avnet Silica 
Avnet Abacus 
Briocean Technology Co.,Ltd. 
Pasternack Enterprises US 
Shengyu Electronics Technology Limited 
EBV Elektronik 
LCSC 
Chips Pulse Industry Limited 
New Strength Electronic Co., Limited 
Perfect Parts Corporation 
YIC International Co., Limited 
Chip Stock 
Silitech Components Inc. 
Vyrian 
IC Components Limited 
LIBRA Elektronik GmbH 
GlobalTek Components 
Greenchips 
Neutron USA 
NexGen Digital
ACDS 
Sense Electronic Company Limited 
Sierra IC