|
PEANRBD1066
D#: PEANRBD1066
|
Pasternack Enterprises
|
Key Specifications, Antenna Type: Rubber Duck, Polarization: Linear, Minimum Frequency: 2.4 GHz, Maximum Frequency: 7.13 GHz, Connector 1 Polarity: Standard, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Maximum Input VSWR: 2:1. 2.4 to 7.125 GHz Blade Antenna SMA Male Tilt Swivel. The PEANRBD1066 is a high-quality multi-band rubber duck antenna with 4 dBi nominal gain and has a frequency range of 2400 MHz to 7125 MHz. Pastenack’s omnidirectional tilt/swivel rubber duck antenna is 6.7 inches tall and 0.51 inches wide. The PEANRBD1066 rubber duck antenna from Pastenack features a SMA Male connector with an input VSWR (voltage standing wave ratio) of 2:1. Pastenack’s linearly polarized antenna can operate at temperatures ranging from -40 °C to 60 °C. This multi-band rubber duck antenna is offered with expert technical support, PDF datasheets, and CAD drawings with dimensions and specifications.
Min Qty:
1
Package Multiple:
1
|
149
|
- 1 $17.3900
- 25 $16.5200
- 50 $15.6500
- 100 $14.9600
- Show All
|
Buy Now
|
|
PE51066-1
D#: PE51066-1
|
Pasternack Enterprises
|
Key Specifications, Antenna Type: GPS Passive, Polarization: RHCP, Minimum Frequency: 1.57242 GHz, Maximum Frequency: 1.57842 GHz, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Maximum Input VSWR: 1.5:1. GPS Passive Antenna Operates From 1.5724 GHz to 1.5784 GHz With a Typical 3 dBi Gain SMA Female Input Connector on 16 ft. of RG174 Rated. GPS antenna PE51066-1 from Pasternack is part of our extensive in-stock RF directional antenna selection. This single band GPS Passive antenna has a frequency range of 1.5724 GHz to 1.5784 GHz and a nominal dBi gain. Our GPS antenna uses SMA female connector and is rated for 0 Watts input. PE51066-1 radio frequency Global Postioning System antenna is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our GPS aerial can ship worldwide the same day of the purchase as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
36
|
- 1 $171.9900
- 25 $163.3900
- 50 $154.7900
- 100 $147.9100
- Show All
|
Buy Now
|
|
PE3M0106-6
D#: PE3M0106-6
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/119-RG174-0XDS2, RF Cable Type: M17/119-RG174, RF Cable Impedance: 50 Ohm, Length: 6 inches. MIL-DTL-17 SMA Male to SMA Male Right Angle Cable 6 Inch Length Using M17/119-RG174 Coax., Radio frequency assembly MIL-DTL-17 SMA male to SMA male right angle cable 6 inch length using M17/119-RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male to SMA male right angle cable 6 inch length using M17/119-RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/55-3026 SMA to M39012/56-3107 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/55-3026 SMA cable connection on one end and right angle M39012/56-3107 SMA cable connection on the other. Our M39012/55-3026 SMA to right angle M39012/56-3107 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/55-3026 SMA to M39012/56-3107 SMA cable is a male to male coax assembly, PE3M0106-6, can also be known as a MIL-DTL-17/MIL-C-17 M39012/55-3026 SMA plug to right angle M39012/56-3107 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/55-3026 SMA plug to M39012/56-3107 SMA plug cable assembly PE3M0106-6 is built with M17/119-RG174 which is a flexible coax type. The Pasternack flexible M39012/55-3026 SMA cable assembly is manufactured with M39012/55-3026 SMA to right angle M39012/56-3107 SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/55-3026 SMA male to M39012/56-3107 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0106-6 can also be used in the other direction and will be right angle M39012/56-3107 SMA male to M39012/55-3026 SMA male cable assembly if the opposite connectivity is required. M39012/55-3026 SMA plug to M39012/56-3107 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/55-3026 SMA to M39012/56-3107 SMA cable assembly for quick shipment worldwide. Variations of M39012/55-3026 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male to SMA male right angle cable 6 inch length using M17/119-RG174 coax.
Min Qty:
1
Package Multiple:
1
|
4
|
- 1 $305.7900
- 25 $290.5000
- 50 $275.2100
|
Buy Now
|
|
PE3C10669
D#: PE3C10669
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W10668-200CM
D#: PE3W10668-200CM
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.740157 inches. BNC Female Bulkhead to SMA Male Low Loss Cable 200CM Length Using LMR-100 Coax., Radio frequency assembly BNC female bulkhead to SMA male low loss cable 200CM length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC female bulkhead to SMA male low loss cable 200CM length using LMR-100 coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC bulkhead cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a female gender on end 1 and male on end 2. This BNC to SMA cable is a female to male coax assembly, PE3W10668-200CM, can also be known as a low loss BNC jack to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC jack to SMA plug cable assembly PE3W10668-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC female bulkhead to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10668-200CM can also be used in the other direction and will be SMA male to BNC female bulkhead cable assembly if the opposite connectivity is required. Low loss BNC jack bulkhead to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female bulkhead to SMA male low loss cable 200CM length using LMR-100 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $95.9900
- 25 $91.1900
- 50 $86.3900
- 100 $82.5500
- Show All
|
Buy Now
|
|
PE3W10669
D#: PE3W10669
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm. SMA Male to TNC Female Cable Using RG188 Coax. PE3W10669 is a SMA male to TNC female cable using RG188 coax. This Pasternack SMA male to TNC female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. Our male SMA to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10669 SMA male to TNC female cable assembly is constructed with RG188 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W01066/HS
D#: PE3W01066/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303/U, RF Cable Type: RG303, RF Cable Impedance: 50 Ohm. UHF Male to UHF Male Cable Using RG303 Coax with HeatShrink. PE3W01066/HS is a UHF male to UHF male cable using RG303 coax. This Pasternack UHF male to UHF male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm UHF for connector 2. Our male UHF to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01066/HS UHF male to UHF male cable assembly is constructed with RG303 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C10666
D#: PE3C10666
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W10661LF
D#: PE3W10661LF
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W10660LF
D#: PE3W10660LF
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to Mini SMP Female Cable Using PE-047SR Coax, LF Solder. PE3W10660LF is a SMA male right angle to Mini SMP female cable using PE-047SR coax. This Pasternack SMA male right angle to Mini SMP female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm Mini SMP for connector 2. SMA right angle to Mini SMP coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female Mini SMP cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W10660LF SMA male right angle to Mini SMP female cable assembly is constructed with PE-047SR coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
Rochester Electronics 
SiTime Corporation 
TE Connectivity 
Master Electronics 
Flip Electronics 
Waytek, Inc. 
North Star Micro Electronics 
Dynamic Solutions GmbH 
Bisco Industries 
ICMILES Electronics Ltd 
AERI 
Component Search 
Interstate Connecting Components 
DB Roberts 
Unikey Electronic Pte Ltd 
Sensible Micro Corporation 
ComSIT USA 
Time Way Electronics Limited 
Allelco Limited 
ICHOME Technology 
Microchip USA 
IBS Electronics 
Ameya Holding Limited 
Hermes Engineering 
Bristol Electronics 
Richardson RFPD 
PUI 
Quest Components 
Component Stockers 
Powell Electronics 
Sager 
PEI Genesis 
Axis Part Limited 
Kepictronics Inc. 
NAC 
GlobalTek Components 
YIC International Co., Limited 
Chip Stock 
Shengyu Electronics Technology Limited 
R&J Components 
Vyrian 
Tedss 
Sierra IC 
LIBRA Elektronik GmbH 
Rutronik 
LCSC 
New Strength Electronic Co., Limited 
Perfect Parts Corporation 
Neutron USA 
ACDS 
Silitech Components Inc. 
Avnet Silica 
Unicom Electronics 
Pasternack Enterprises US 
Win Source Electronics 
EBV Elektronik 
Greenchips 
New Advantage Corporation 
Sense Electronic Company Limited 
Avnet Abacus 
Cytech Systems Limited 
NexGen Digital
MountainView Components Inc. 
IC Components Limited 
Utmel Electronic