|
PE51080
D#: PE51080
|
Pasternack Enterprises
|
Key Specifications, Antenna Type: Portable, Polarization: Vertical, Minimum Frequency: 2.4 GHz, Maximum Frequency: 5.825 GHz, Connector 1 Polarity: Reverse Polarity, Connector Series: SMA, Connector Gender: Male, Impedance: 50 Ohm, Nominal Gain: 2 dB, Maximum Input VSWR: 2:1. Rubber Duck Portable Dual Band Antenna Operates From 2.4 to 5.825 GHz With a Nominal 2 dBi Gain Reverse Polarity SMA Male Input Connector. Rubber duck portable antenna PE51080 from Pasternack (also known as a rubber duck antenna) is part of our extensive in-stock omni-directional radio antenna selection. This dual band rubber duck portable antenna has a frequency range of 2.4 GHz to 2.5 GHz, 4.9 GHz to 5.825 GHz and a 2 nominal dBi gain. Our portable rubber duck antenna uses reverse polarity SMA male connector and is rated for 0 Watts input. PE51080 rubber duck portable radio antenna is one of over 40,000 RF, microwave and millimeter wave components supplied from Pasternack. Our portable rubber duck aerial can be bought and shipped worldwide the same-day as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
231
|
- 1 $45.3900
- 25 $43.1200
- 50 $40.8500
- 100 $39.0400
- Show All
|
Buy Now
|
|
PE3CA1080/HS-60
D#: PE3CA1080/HS-60
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-400 Coax with HeatShrink., Radio frequency assembly SMA male to TNC male low loss cable 60 inch length using LMR-400 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 60 inch length using LMR-400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3CA1080/HS-60 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3CA1080/HS-60 RF cable has a PE jacket of 0.405-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3CA1080/HS-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3CA1080/HS-60 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
210
|
- 1 $129.9900
- 25 $123.4900
- 50 $116.9900
- 100 $111.7900
- Show All
|
Buy Now
|
|
PE3CA1080/HS-24
D#: PE3CA1080/HS-24
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to TNC Male Low Loss Cable 24 Inch Length Using LMR-400 Coax with HeatShrink., Radio frequency assembly SMA male to TNC male low loss cable 24 inch length using LMR-400 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 24 inch length using LMR-400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a TNC cable connection on the other. Our low loss SMA to TNC cable assembly has a male gender on end 1 and a male on end 2. PE3CA1080/HS-24 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3CA1080/HS-24 RF cable has a PE jacket of 0.405-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our SMA male to TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3CA1080/HS-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3CA1080/HS-24 can also be used in the other direction and will be a TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
210
|
- 1 $121.9900
- 25 $115.8900
- 50 $109.7900
- 100 $104.9100
- Show All
|
Buy Now
|
|
PE3W10807
D#: PE3W10807
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: Mini SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. Mini SMP Female to Mini SMP Female Cable Using PE-SR405AL Coax. PE3W10807 is a Mini SMP female to Mini SMP female cable using PE-SR405AL coax. This Pasternack Mini SMP female to Mini SMP female cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm Mini SMP for connector 2. Our female Mini SMP to female Mini SMP cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W10807 Mini SMP female to Mini SMP female cable assembly is constructed with PE-SR405AL coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C10802
D#: PE3C10802
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C10804
D#: PE3C10804
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C10800/HS
D#: PE3C10800/HS
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W10802/HS
D#: PE3W10802/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. SMA Male to N Female Cable Using RG8X Coax with HeatShrink. PE3W10802/HS is a SMA male to N female cable using RG8X coax. This Pasternack SMA male to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10802/HS SMA male to N female cable assembly is constructed with RG8X coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C10807/HS
D#: PE3C10807/HS
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3CA1080LF/HS
D#: PE3CA1080LF/HS
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
RECOM Power 
Rochester Electronics 
SiTime Corporation 
TE Connectivity 
Master Electronics 
Coilcraft Direct 
Flip Electronics 
Commodity Components Intl 
Bristol Electronics 
TestEquity LLC 
Blume Elektronik Distribution GmbH 
Velocity Electronics 
Axis Part Limited 
NAC 
Richardson RFPD 
Component Stockers 
ANDE Electronics 
ComSIT USA 
Powell Electronics 
Chip-Germany GmbH 
Allelco Limited 
ICMILES Electronics Ltd 
Sensible Micro Corporation 
West Coast Components Inc. 
IBS Electronics 
Quest Components 
Dynamic Solutions GmbH 
PEI Genesis 
C Plus Electronics 
Teledyne e2v 
PUI 
DB Roberts 
Sager 
ICProFast Technology 
Time Way Electronics Limited 
Microchip USA 
Bisco Industries 
Techni-Tool, Inc. 
Interstate Connecting Components 
Kepictronics Inc. 
Component Search 
Tencell 
CDM Electronics 
North Star Micro Electronics 
Chips Pulse Industry Limited 
RG Elektrotechnologie GmbH 
Avnet Abacus 
Unicom Electronics 
NexGen Digital
CXDA Electronics 
Shengyu Electronics Technology Limited 
Win Source Electronics 
ACDS 
Silitech Components Inc. 
R&J Components 
Perfect Parts Corporation 
Vyrian 
New Advantage Corporation 
Tedss 
Karl Kruse GmbH & Co KG 
Chip Stock 
Utmel Electronic 
MountainView Components Inc. 
YIC International Co., Limited 
Futuretech Components Ltd 
J2 Sourcing 
Pasternack Enterprises US 
Sierra IC 
New Strength Electronic Co., Limited 
LIBRA Elektronik GmbH 
ES Components 
Opulent Electronics Inc. 
Metaverse IC Inc. 
IC Components Limited 
EBV Elektronik 
Rutronik 
Cytech Systems Limited 
LCSC 
AMH Components Ltd 
JRH Electronics 
Neutron USA 
Greenchips 
Avnet Silica