|
PE3W13801-100CM
D#: PE3W13801-100CM
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. Water Blue FAKRA Jack Right Angle to MCX Plug Right Angle Low Loss Cable 100 CM Length Using LMR-100A-UF Coax., Radio frequency assembly water blue FAKRA jack right angle to MCX plug right angle low loss cable 100 cm length using LMR-100A-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The water blue FAKRA jack right angle to MCX plug right angle low loss cable 100 cm length using LMR-100A-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle FAKRA cable connection on one end and a right angle MCX cable connection on the other. Our low loss right angle FAKRA to right angle MCX cable assembly has a jack gender on end 1 and a plug on end 2. PE3W13801-100CM can also be known as a low loss right angle FAKRA female to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W13801-100CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle FAKRA jack to right angle MCX plug cable has a maximum VSWR of 1.4:1. FAKRA female to MCX male cable assembly PE3W13801-100CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W13801-100CM can also be used in the other direction and will be a right angle MCX plug to right angle FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA right angle female to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to MCX cable assembly for quick shipment worldwide. Variations of FAKRA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
847
|
- 1 $58.8900
- 25 $55.9500
- 50 $53.0000
- 100 $50.6500
- Show All
|
Buy Now
|
|
PE3FCA221-10M
D#: PE3FCA221-10M
|
Pasternack Enterprises
|
Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC UPC to SC UPC, OM4 Multimode Indoor Distribution Cable, 4.5mm Riser, 2.0mm breakout, Aqua-10M. Pasternack’s PE3FCA221-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 4-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA221-10M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
138
|
- 1 $149.9900
- 5 $143.9900
- 10 $137.9900
- 25 $131.9900
- Show All
|
Buy Now
|
|
PE3TC1102-48
D#: PE3TC1102-48
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SF200LL, RF Cable Type: PE-SF200LL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Quick Lock N Male to Quick Lock N Male Low Frequency Low Loss Cable 48 Inch Length Using PE-SF200LL Coax, RoHS., Radio frequency assembly quick lock N male to quick lock N male low frequency low loss cable 48 inch length using PE-SF200LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Quick lock N male to quick lock N male low frequency low loss cable 48 inch length using PE-SF200LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE3TC1102-48, can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3TC1102-48 is built with PE-SF200LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this quick lock N male to quick lock N male low frequency low loss cable 48 inch length using PE-SF200LL coax, RoHS.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $194.9900
- 25 $185.2400
- 50 $175.4900
- 100 $167.6900
- Show All
|
Buy Now
|
|
PE3C1101-100CM
D#: PE3C1101-100CM
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. SMA Male to N Female Bulkhead Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly SMA male to N female bulkhead low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N female bulkhead low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type bulkhead cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and female on end 2. PE3C1101-100CM can also be known as a low loss SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C1101-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to N type cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1101-100CM can also be used in the other direction and will be type N female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead low loss cable 100 cm length using LMR-100 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $82.3900
- 25 $78.2700
- 50 $74.1500
- 100 $70.8600
- Show All
|
Buy Now
|
|
PE2CP1100
D#: PE2CP1100
|
Pasternack Enterprises
|
Key Specifications, Directionality: Directional, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: 4 GHz, Maximum Frequency: 18 GHz, Maximum Input Power: 50 Watt, Coupling Value: 6 dB. Directional 6 dB SMA Coupler From 4 GHz to 18 GHz Rated to 50 Watts. RF coupler part number PE2CP1100 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with SMA ports. Our directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 4 GHz and a maximum frequency of 18 GHz. Directional coupler part # PE2CP1100 is constructed with a coupling value of 6 dB and a coupler directivity of 12 dB. This female SMA directional coupler is built with a maximum insertion loss of 0.5 dB and a maximum input power of 50 watts. Our directional coupler design with SMA connector is rated for a maximum insertion loss of 0.5 dB and a maximum VSWR of 1.5. Additional female SMA coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1100 directional 6 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $802.9900
- 10 $770.8700
- 25 $738.7500
|
Buy Now
|
|
PE3C1101/HS
D#: PE3C1101/HS
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMA Male Low Loss Cable Using LMR-100 Coax with HeatShrink., Pasternack’s PE3C1101/HS low loss type N female bulkhead to SMA male RF cable assembly using LMR-100A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and an SMA cable connection on the other. Our type N to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C1101/HS can also be known as a low loss type N jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1101/HS RF cable has a pvc jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our bulkhead type N female to SMA male cable has a maximum VSWR of 1.4:1. This PE3C1101/HS type N jack to SMA plug cable assembly is built with LMR-100A, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1101/HS can also be used in the other direction and will be an SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. This low loss type N jack bulkhead to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C11010
D#: PE3C11010
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C11047
D#: PE3C11047
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C11092
D#: PE3C11092
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C7871-100CM
D#: PE3C7871-100CM
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. QMA Male to Snap-On QMA Male Right Angle Low PIM Cable 100 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly QMA male to snap-on QMA male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QMA male to snap-on QMA male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with QMA cable connection on one end and right angle QMA cable connection on the other. Our low PIM QMA to right angle QMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to QMA cable is a male to male coax assembly, PE3C7871-100CM, can also be known as a low PIM QMA plug to right angle QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE3C7871-100CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated QMA cable assembly is manufactured with QMA to right angle QMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM QMA male to QMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7871-100CM can also be used in the other direction and will be right angle QMA male to QMA male cable assembly if the opposite connectivity is required. Low PIM QMA plug to QMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to snap-on QMA male right angle low PIM cable 100 cm length using 1/4 inch superflexible coax.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $113.9900
- 25 $108.2900
- 50 $102.5900
- 100 $98.0300
- Show All
|
Buy Now
|
Microchip Technology Inc 
SiTime Corporation 
Rochester Electronics 
TE Connectivity 
Sager 
Master Electronics 
Coilcraft Direct 
Flip Electronics 
Chipskey Technology Co Ltd 
Component Solutions, Inc. 
ICMILES Electronics Ltd 
PB Signal 
Richardson RFPD 
Microchip USA 
Chip-Germany GmbH 
North Star Micro Electronics 
Waytek, Inc. 
PEI Genesis 
Sensible Micro Corporation 
Component Search 
ICHOME Technology 
Kurrent Technology 
Interstate Connecting Components 
Hermes Engineering 
DST International Group (HK) Limited 
Component Stockers 
Quest Components 
Dynamic Solutions GmbH 
PUI 
L-com US 
ComSIT USA 
Bristol Electronics 
DB Roberts 
NAC 
Unikey Electronic Pte Ltd 
Powell Electronics 
R&J Components 
Kepictronics Inc. 
Time Way Electronics Limited 
SEMICON INTL HK CO LTD 
Chip Stock 
IC Components Limited 
Greenchips 
Vyrian 
MountainView Components Inc. 
Perfect Parts Corporation 
Shengyu Electronics Technology Limited 
GlobalTek Components 
Futuretech Components Ltd 
LIBRA Elektronik GmbH 
Sense Electronic Company Limited 
ICHOT TECHNOLOGY LIMITED 
RG Elektrotechnologie GmbH 
LCSC 
Silitech Components Inc. 
YIC International Co., Limited 
Tedss 
Pasternack Enterprises US 
Cytech Systems Limited 
Neutron USA 
New Advantage Corporation
Rutronik 
NexGen Digital
Sierra IC 
Venkel Ltd. 
Unicom Electronics 
Win Source Electronics