|
PE33120-60
D#: PE33120-60
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Female to SMA Female Cable 60 Inch Length Using RG174 Coax., Radio frequency assembly SMA female to SMA female cable 60 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to SMA female cable 60 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE33120-60, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE33120-60 is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA female to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to SMA female cable 60 inch length using RG174 coax.
Min Qty:
1
Package Multiple:
1
|
2158
|
- 1 $86.9900
- 25 $82.6400
- 50 $78.2900
- 100 $74.8100
- Show All
|
Buy Now
|
|
PE3C1206
D#: PE3C1206
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. 7/16 DIN Male to 7/16 DIN Male Cable Using PE-P195 Coax. PE3C1206 is a 7/16 DIN male to 7/16 DIN male cable using PE-P195 coax. This Pasternack 7/16 DIN male to 7/16 DIN male cable assembly uses a 50 Ohm 7/16 DIN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male 7/16 DIN to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1206 7/16 DIN male to 7/16 DIN male cable assembly is constructed with PE-P195 coax.
Min Qty:
1
Package Multiple:
1
|
117
|
|
Buy Now
|
|
PE3W01206/HS-200CM
D#: PE3W01206/HS-200CM
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. MCX Jack to SMA Male Low Loss Cable 200 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-200CM can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-200CM can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
94
|
- 1 $81.9900
- 25 $77.8900
- 50 $73.7900
- 100 $70.5100
- Show All
|
Buy Now
|
|
PE3W01206/HS-24
D#: PE3W01206/HS-24
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MCX Jack to SMA Male Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 24 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-24 can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-24 can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
94
|
- 1 $76.9900
- 25 $73.1400
- 50 $69.2900
- 100 $66.2100
- Show All
|
Buy Now
|
|
PE3W01206/HS-100CM
D#: PE3W01206/HS-100CM
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. MCX Jack to SMA Male Low Loss Cable 100 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX jack to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX jack to SMA male low loss cable 100 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a MCX cable connection on one end and a SMA cable connection on the other. Our low loss a MCX to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W01206/HS-100CM can also be known as a low loss MCX female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01206/HS-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. MCX female to SMA plug cable assembly PE3W01206/HS-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01206/HS-100CM can also be used in the other direction and will be SMA male to MCX jack cable assembly if the opposite connectivity is required. Low loss MCX female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to SMA cable assembly for quick shipment worldwide. Variations of MCX and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
94
|
- 1 $78.9900
- 25 $75.0400
- 50 $71.0900
- 100 $67.9300
- Show All
|
Buy Now
|
|
PE51206
D#: PE51206
|
Pasternack Enterprises
|
Key Specifications, Antenna Type: PCB, Minimum Frequency: 2.4 GHz, Maximum Frequency: 2.5 GHz, Connector 1 Polarity: Standard, Connector Series: UMCX, Connector Gender: Plug, Impedance: 50 Ohm, Maximum Input VSWR: 2:1.
Min Qty:
1
Package Multiple:
1
|
10
|
- 1 $5.2900
- 25 $5.0800
- 50 $4.9200
- 100 $4.8100
- Show All
|
Buy Now
|
|
PE20DV1206
D#: PE20DV1206
|
Pasternack Enterprises
|
Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 1 MHz, Maximum Frequency: 500 MHz, Number of Output Ports: 3 Port, Impedance: 50 Ohm, Maximum Input Power: 10 Watt. 3 way N Power Divider from 1 MHz to 500 MHz Rated at 10 Watts., The PE20DV1206 3-way type N power divider (also known as a type N coaxial power splitter) is rated for a minimum frequency of 1 MHz and a maximum frequency of 500 MHz. This Pasternack 3 port power divider / coaxial splitter has a 50 Ohm impedance and a maximum input power of 10 Watts. Our type N coaxial RF splitter / divider has a female type N input and 3 female type N output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Pasternack’s PE20DV1206 power splitter comes with an aluminum housing and can handle maximum reverse power up to 1 Watts. This type N connector power divider has a 0.40 dB maximum amplitude balance. Our 50 Ohm radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. This 3-way type N RF power divider from Pasternack has a maximum insertion loss of 1.2 dB. The maximum input VSWR of this type N splitter / divider is 1.4:1 and the minimum isolation is 20 dB. Our 3 port type N power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 3-way type N female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect RF power divider for your requirements.
Min Qty:
1
Package Multiple:
1
|
3
|
- 1 $680.0000
- 5 $652.8000
- 10 $625.6000
- 25 $598.4000
- Show All
|
Buy Now
|
|
PE3W12060
D#: PE3W12060
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. C Male to MCX Plug Cable Using LMR-195 Coax. PE3W12060 is a C male to MCX plug cable using LMR-195 coax. This Pasternack C male to MCX plug cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm MCX for connector 2. Our male C to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12060 C male to MCX plug cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W12068
D#: PE3W12068
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to Reverse Polarity SMA Male Right Angle Cable Using RG316 Coax. PE3W12068 is a MMCX plug right angle to reverse polarity SMA male right angle cable using RG316 coax. This Pasternack MMCX plug right angle to reverse polarity SMA male right angle cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm SMA for connector 2. MMCX right angle to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to reverse polarity male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W12068 MMCX plug right angle to SMA reverse polarity male right angle cable assembly is constructed with RG316 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C11206
D#: PE3C11206
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
TE Connectivity 
Rochester Electronics 
Coilcraft Direct 
Flip Electronics 
Component Search 
Interstate Connecting Components 
Ameya Holding Limited 
Axis Part Limited 
Chip-Germany GmbH 
Component Solutions, Inc. 
Time Way Electronics Limited 
IBS Electronics 
Waytek, Inc. 
Richardson RFPD 
L-com US 
Powell Electronics 
ComSIT USA 
Bisco Industries 
Microchip USA 
Kurrent Technology 
Sager 
Component Stockers 
Hermes Engineering 
NAC 
ChipNobo Co., Limited 
Bristol Electronics 
AERI 
DB Roberts 
Dynamic Solutions GmbH 
PUI 
Sensible Micro Corporation 
ICMILES Electronics Ltd 
North Star Micro Electronics 
PEI Genesis 
Tencell 
Kepictronics Inc. 
Unikey Electronic Pte Ltd 
Concentric 
ICHOME Technology 
Allelco Limited 
New Strength Electronic Co., Limited 
Utmel Electronic 
Unicom Electronics 
Rutronik 
Vyrian 
Shengyu Electronics Technology Limited 
Pasternack Enterprises US 
ACDS 
R&J Components 
Neutron USA 
Avnet Silica 
RG Elektrotechnologie GmbH 
Venkel Ltd. 
Silitech Components Inc. 
Futuretech Components Ltd 
MountainView Components Inc. 
Chip Stock 
LIBRA Elektronik GmbH 
Perfect Parts Corporation 
GlobalTek Components 
Avnet Abacus 
ICHOT TECHNOLOGY LIMITED 
IC Components Limited 
Unibetter Technology Co., Ltd 
New Advantage Corporation 
LCSC 
Greenchips 
YIC International Co., Limited 
Tedss 
EBV Elektronik 
Sense Electronic Company Limited 
Win Source Electronics 
NexGen Digital
Cytech Systems Limited 
Sierra IC