|
PE36123-12
D#: PE36123-12
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: 1.6/5.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm 1.6/5.6 Plug Right Angle to 75 Ohm 1.6/5.6 Plug Right Angle Cable 12 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 12 inch length using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 12 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to 1.6/5.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle 1.6/5.6 cable connection on one end and right angle 1.6/5.6 cable connection on the other. Our right angle 1.6/5.6 to right angle 1.6/5.6 cable assemblies have a plug gender on end 1 and plug on end 2. This 1.6/5.6 to 1.6/5.6 cable is a plug to plug coax assembly, PE36123-12, can also be known as a right angle 1.6/5.6 male to right angle 1.6/5.6 male cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to 1.6/5.6 male cable assembly PE36123-12 is built with RG179 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with right angle 1.6/5.6 to right angle 1.6/5.6 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 right angle plug to 1.6/5.6 right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1.6/5.6 right angle male to 1.6/5.6 right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to 1.6/5.6 cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug right angle to 75 Ohm 1.6/5.6 plug right angle cable 12 inch length using 75 Ohm RG179 coax.
Min Qty:
1
Package Multiple:
1
|
1393
|
- 1 $96.9900
- 25 $92.1400
- 50 $87.2900
- 100 $83.4100
- Show All
|
Buy Now
|
|
PE3W12315LF
D#: PE3W12315LF
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm. Outdoor Rated N Male Right Angle to N Male Low PIM Cable Using SPO-250 Coax, LF Solder., Radio frequency assembly outdoor rated N male right angle to N male low PIM cable using SPO-250 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The outdoor rated N male right angle to N male low PIM cable using SPO-250 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low PIM right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12315LF can also be known as a low PIM right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W12315LF RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W12315LF is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W12315LF can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low PIM type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
1280
|
|
Buy Now
|
|
PE410-06031-231
D#: PE410-06031-231
|
Pasternack Enterprises
|
Key Specifications, Polarity: Standard, Connector Series: TRB, Connector Gender: Plug, Impedance: 78 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 500 MHz, Interface Type 1: 30-02003, Interface Type 2: TWC-78-1. 78 Ohm TRB Plug 1553 Connector Crimp/Solder Attachment for 30-02003, TWC-78-1,. PE410-06031-231 TRB plug coaxial connector has an interface type of TRB plug 30-02003, TWC-78-1 and a 78 Ohm impedance.Pasternack TRB plug connector uses shield/contact crimp/solder as an attachment method. Our plug TRB coaxial connector provides a minimum frequency of DC and a maximum frequency of 500 MHz. The Pasternack TRB coaxial connector has a brass body with nickel plating. This TRB plug coaxial RF connector is REACH compliant. Our high quality PE410-06031-231 features a ASTM-B-733 body plating specification. We also build TRB custom connector cable assemblies that will ship the same day as well. Our TRB plug connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you to the perfect RF connector as per your requirement.
Min Qty:
1
Package Multiple:
1
|
439
|
- 1 $129.9900
- 25 $123.4900
- 50 $116.9900
- 100 $111.7900
- Show All
|
Buy Now
|
|
PE3W12315LF-50CM
D#: PE3W12315LF-50CM
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. Outdoor Rated N Male Right Angle to N Male Low PIM Cable 50 CM Length Using SPO-250 Coax, LF Solder., Radio frequency assembly outdoor rated N male right angle to N male low PIM cable 50 cm length using SPO-250 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The outdoor rated N male right angle to N male low PIM cable 50 cm length using SPO-250 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low PIM right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12315LF-50CM can also be known as a low PIM right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W12315LF-50CM RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W12315LF-50CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W12315LF-50CM can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low PIM type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
256
|
- 1 $82.9900
- 25 $78.8400
- 50 $74.6900
- 100 $71.3700
- Show All
|
Buy Now
|
|
PE3W12315LF-12
D#: PE3W12315LF-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Outdoor Rated N Male Right Angle to N Male Low PIM Cable 12 Inch Length Using SPO-250 Coax, LF Solder., Radio frequency assembly outdoor rated N male right angle to N male low PIM cable 12 inch length using SPO-250 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The outdoor rated N male right angle to N male low PIM cable 12 inch length using SPO-250 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low PIM right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12315LF-12 can also be known as a low PIM right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W12315LF-12 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W12315LF-12 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W12315LF-12 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low PIM type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
256
|
- 1 $80.9900
- 25 $76.9400
- 50 $72.8900
- 100 $69.6500
- Show All
|
Buy Now
|
|
PE3W12315LF-24
D#: PE3W12315LF-24
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Outdoor Rated N Male Right Angle to N Male Low PIM Cable 24 Inch Length Using SPO-250 Coax, LF Solder., Radio frequency assembly outdoor rated N male right angle to N male low PIM cable 24 inch length using SPO-250 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The outdoor rated N male right angle to N male low PIM cable 24 inch length using SPO-250 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low PIM right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12315LF-24 can also be known as a low PIM right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Foam PE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3W12315LF-24 RF cable has a PE jacket of 0.303-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W12315LF-24 is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3W12315LF-24 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low PIM type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
256
|
- 1 $83.9900
- 25 $79.7900
- 50 $75.5900
- 100 $72.2300
- Show All
|
Buy Now
|
|
PE33123-12
D#: PE33123-12
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG302/U, RF Cable Type: RG302, RF Cable Impedance: 75 Ohm, Length: 12 inches. BNC Male to BNC Male Cable 12 Inch Length Using 75 Ohm RG302 Coax., Radio frequency assembly BNC male to BNC male cable 12 inch length using 75 Ohm RG302 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 12 inch length using 75 Ohm RG302 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE33123-12, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE33123-12 is built with RG302 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 12 inch length using 75 Ohm RG302 coax.
Min Qty:
1
Package Multiple:
1
|
240
|
- 1 $29.5900
- 25 $28.1100
- 50 $26.6300
- 100 $25.4500
- Show All
|
Buy Now
|
|
PE3FCA123-10M
D#: PE3FCA123-10M
|
Pasternack Enterprises
|
Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC APC to SC APC, SM OS2, 2.0mm LSZH, Yellow-10M. Pasternack’s PE3FCA123-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with simplex SC/APC to SC/APC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA123-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/APC to SC/APC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
101
|
- 1 $24.0845
- 5 $23.1200
- 10 $22.1600
- 25 $21.1900
- Show All
|
Buy Now
|
|
PE3M0123-18
D#: PE3M0123-18
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 18 inches. MIL-DTL-17 SMA Male Right Angle to TNC Male Cable 18 Inch Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male right angle to TNC male cable 18 inch length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male right angle to TNC male cable 18 inch length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/56-3129 SMA to M39012/26-0010 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle M39012/56-3129 SMA cable connection on one end and M39012/26-0010 TNC cable connection on the other. Our right angle M39012/56-3129 SMA to M39012/26-0010 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/56-3129 SMA to M39012/26-0010 TNC cable is a male to male coax assembly, PE3M0123-18, can also be known as a MIL-DTL-17/MIL-C-17 right angle M39012/56-3129 SMA plug to M39012/26-0010 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/56-3129 SMA plug to M39012/26-0010 TNC plug cable assembly PE3M0123-18 is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/56-3129 SMA cable assembly is manufactured with right angle M39012/56-3129 SMA to M39012/26-0010 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/56-3129 SMA right angle male to M39012/26-0010 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0123-18 can also be used in the other direction and will be M39012/26-0010 TNC male to right angle M39012/56-3129 SMA male cable assembly if the opposite connectivity is required. M39012/56-3129 SMA right angle plug to M39012/26-0010 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/56-3129 SMA to M39012/26-0010 TNC cable assembly for quick shipment worldwide. Variations of M39012/56-3129 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male right angle to TNC male cable 18 inch length using M17/28-RG58 coax.
Min Qty:
1
Package Multiple:
1
|
14
|
- 1 $341.9900
- 25 $324.8900
- 50 $307.7900
|
Buy Now
|
|
PE3M0123-100CM
D#: PE3M0123-100CM
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/28-RG058-0XDS2, RF Cable Type: M17/28-RG058, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. MIL-DTL-17 SMA Male Right Angle to TNC Male Cable 100 cm Length Using M17/28-RG58 Coax., Radio frequency assembly MIL-DTL-17 SMA male right angle to TNC male cable 100 cm length using M17/28-RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 SMA male right angle to TNC male cable 100 cm length using M17/28-RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/56-3129 SMA to M39012/26-0010 TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle M39012/56-3129 SMA cable connection on one end and M39012/26-0010 TNC cable connection on the other. Our right angle M39012/56-3129 SMA to M39012/26-0010 TNC cable assemblies have a male gender on end 1 and male on end 2. This M39012/56-3129 SMA to M39012/26-0010 TNC cable is a male to male coax assembly, PE3M0123-100CM, can also be known as a MIL-DTL-17/MIL-C-17 right angle M39012/56-3129 SMA plug to M39012/26-0010 TNC plug cable assembly and will be shipped same-day as it is purchased. M39012/56-3129 SMA plug to M39012/26-0010 TNC plug cable assembly PE3M0123-100CM is built with M17/28-RG058 which is a flexible coax type. The Pasternack flexible M39012/56-3129 SMA cable assembly is manufactured with right angle M39012/56-3129 SMA to M39012/26-0010 TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MIL-C-17 1 GHz maximum frequency M39012/56-3129 SMA right angle male to M39012/26-0010 TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0123-100CM can also be used in the other direction and will be M39012/26-0010 TNC male to right angle M39012/56-3129 SMA male cable assembly if the opposite connectivity is required. M39012/56-3129 SMA right angle plug to M39012/26-0010 TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/56-3129 SMA to M39012/26-0010 TNC cable assembly for quick shipment worldwide. Variations of M39012/56-3129 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 SMA male right angle to TNC male cable 100 cm length using M17/28-RG58 coax.
Min Qty:
1
Package Multiple:
1
|
14
|
- 1 $343.9900
- 25 $326.7900
- 50 $309.5900
|
Buy Now
|
Microchip Technology Inc 
Rochester Electronics 
TE Connectivity 
SiTime Corporation 
Flip Electronics 
Richardson RFPD 
NAC 
North Star Micro Electronics 
Hermes Engineering 
Bisco Industries 
Microchip USA 
Waytek, Inc. 
Kurrent Technology 
DB Roberts 
Chipskey Technology Co Ltd 
R&J Components 
L-com US 
Time Way Electronics Limited 
Dynamic Solutions GmbH 
Powell Electronics 
Sager 
PEI Genesis 
Bristol Electronics 
IBS Electronics 
ComSIT USA 
ICMILES Electronics Ltd 
C Plus Electronics 
Component Stockers 
PUI 
Unikey Electronic Pte Ltd 
LIBRA Elektronik GmbH 
RG Elektrotechnologie GmbH 
New Advantage Corporation
MountainView Components Inc. 
Sense Electronic Company Limited 
Win Source Electronics 
Sierra IC 
LCSC 
Silitech Components Inc. 
YIC International Co., Limited 
Venkel Ltd. 
IC Components Limited 
Rutronik 
Vyrian 
Cytech Systems Limited 
Futuretech Components Ltd 
Pasternack Enterprises US 
Unicom Electronics 
NexGen Digital
Tedss 
Neutron USA 
GlobalTek Components 
New Strength Electronic Co., Limited 
Shengyu Electronics Technology Limited 
Perfect Parts Corporation 
Unibetter Technology Co., Ltd