|
PE3W17100/HS
D#: PE3W17100/HS
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: MMBX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Snap-On MMBX Plug Right Angle to Slide-On BMA Jack 2 Hole Flange Cable Using RG316 Coax with HeatShrink., Radio frequency assembly snap-on MMBX plug right angle to slide-on BMA jack 2 hole flange cable using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The snap-on MMBX plug right angle to slide-on BMA jack 2 hole flange cable using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMBX to BMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MMBX cable connection on one end and a BMA 2 hole flange cable connection on the other. Our right angle MMBX to BMA cable assembly has a plug gender on end 1 and a jack on end 2. PE3W17100/HS can also be known as a right angle MMBX male to BMA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W17100/HS RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. Our right angle MMBX plug to 2 hole flange BMA jack cable has a maximum VSWR of 1.4:1. MMBX male to BMA female cable assembly PE3W17100/HS is built with RG316 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to BMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17100/HS can also be used in the other direction and will be a BMA jack 2 hole flange to right angle MMBX plug cable assembly if the opposite connectivity is required. MMBX right angle male to BMA female 2 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMBX to BMA cable assembly for quick shipment worldwide. Variations of MMBX and BMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMBX to BMA RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
350
|
|
Buy Now
|
|
PE3M0017-100CM
D#: PE3M0017-100CM
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/60-RG142-27478, RF Cable Type: M17/60-RG142, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. MIL-DTL-17 N Female to SMA Male Cable 100 cm Length Using M17/60-RG142 Coax., Radio frequency assembly MIL-DTL-17 N female to SMA male cable 100 cm length using M17/60-RG142 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female to SMA male cable 100 cm length using M17/60-RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/02-0503 type N to M39012/55-3028 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/02-0503 N type cable connection on one end and M39012/55-3028 SMA cable connection on the other. Our M39012/02-0503 type N to M39012/55-3028 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/02-0503 type N to M39012/55-3028 SMA cable is a female to male coax assembly, PE3M0017-100CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/02-0503 N type jack to M39012/55-3028 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/02-0503 type N jack to M39012/55-3028 SMA plug cable assembly PE3M0017-100CM is built with M17/60-RG142 which is a flexible coax type. The Pasternack flexible M39012/02-0503 N cable assembly is manufactured with M39012/02-0503 type N to M39012/55-3028 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/02-0503 type N female to M39012/55-3028 SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0017-100CM can also be used in the other direction and will be M39012/55-3028 SMA male to M39012/02-0503 N type female cable assembly if the opposite connectivity is required. M39012/02-0503 N type jack to M39012/55-3028 SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/02-0503 type N to M39012/55-3028 SMA cable assembly for quick shipment worldwide. Variations of M39012/02-0503 type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female to SMA male cable 100 cm length using M17/60-RG142 coax.
Min Qty:
1
Package Multiple:
1
|
122
|
- 1 $247.9900
- 25 $235.5900
- 50 $223.1900
|
Buy Now
|
|
PE3W17100/HS-36
D#: PE3W17100/HS-36
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: MMBX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Snap-On MMBX Plug Right Angle to Slide-On BMA Jack 2 Hole Flange Cable 36 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly snap-on MMBX plug right angle to slide-on BMA jack 2 hole flange cable 36 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The snap-on MMBX plug right angle to slide-on BMA jack 2 hole flange cable 36 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMBX to BMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MMBX cable connection on one end and a BMA 2 hole flange cable connection on the other. Our right angle MMBX to BMA cable assembly has a plug gender on end 1 and a jack on end 2. PE3W17100/HS-36 can also be known as a right angle MMBX male to BMA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W17100/HS-36 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. Our right angle MMBX plug to 2 hole flange BMA jack cable has a maximum VSWR of 1.4:1. MMBX male to BMA female cable assembly PE3W17100/HS-36 is built with RG316 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to BMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17100/HS-36 can also be used in the other direction and will be a BMA jack 2 hole flange to right angle MMBX plug cable assembly if the opposite connectivity is required. MMBX right angle male to BMA female 2 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMBX to BMA cable assembly for quick shipment worldwide. Variations of MMBX and BMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMBX to BMA RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
70
|
- 1 $155.9900
- 25 $148.1900
- 50 $140.3900
- 100 $134.1500
- Show All
|
Buy Now
|
|
PE3W17100/HS-48
D#: PE3W17100/HS-48
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: MMBX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BMA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 2 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Snap-On MMBX Plug Right Angle to Slide-On BMA Jack 2 Hole Flange Cable 48 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly snap-on MMBX plug right angle to slide-on BMA jack 2 hole flange cable 48 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The snap-on MMBX plug right angle to slide-on BMA jack 2 hole flange cable 48 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMBX to BMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MMBX cable connection on one end and a BMA 2 hole flange cable connection on the other. Our right angle MMBX to BMA cable assembly has a plug gender on end 1 and a jack on end 2. PE3W17100/HS-48 can also be known as a right angle MMBX male to BMA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W17100/HS-48 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The flexible RF cable has a between series connection. Our right angle MMBX plug to 2 hole flange BMA jack cable has a maximum VSWR of 1.4:1. MMBX male to BMA female cable assembly PE3W17100/HS-48 is built with RG316 which is a flexible coax type. The Pasternack flexible MMBX cable assembly is manufactured with right angle MMBX to BMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17100/HS-48 can also be used in the other direction and will be a BMA jack 2 hole flange to right angle MMBX plug cable assembly if the opposite connectivity is required. MMBX right angle male to BMA female 2 hole flange cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMBX to BMA cable assembly for quick shipment worldwide. Variations of MMBX and BMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMBX to BMA RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
70
|
- 1 $159.9900
- 25 $151.9900
- 50 $143.9900
- 100 $137.5900
- Show All
|
Buy Now
|
|
PE3FCA217-10M
D#: PE3FCA217-10M
|
Pasternack Enterprises
|
Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC UPC to ST UPC, OM3 Multimode Indoor Distribution Cable, 4.5mm Plenum, 2.0mm breakout, Aqua-10M. Pasternack’s PE3FCA217-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 4-fiber cable assembly is equipped with SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA217-10M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
49
|
- 1 $139.9900
- 5 $134.3900
- 10 $128.7900
- 25 $123.1900
- Show All
|
Buy Now
|
|
PE91710
D#: PE91710
|
Pasternack Enterprises
|
Key Specifications. Connector Series 1 N Connector Gender 1 Female Connector Polarity 1 Standard Connector Impedance 1 50 Ohm Connector Series 2 QMA Connector Gender 2 Female Connector Polarity 2 Standard Connector Impedance 2 50 Ohm Frequency, Min DC Frequency, Max 6 GHz Adapter Body Style Straight Connector Mount Method 1 4 Hole Flange Connector Body Material 1 Brass Connector Body Plating 1 Tri-Metal Connector Body Material 2 Brass Connector Body Plating 2 Tri-Metal. Low PIM 4 Hole Flange Mount N Female to QMA Female Adapter. Type N female to QMA female adapter part number PE91710 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. The RF adapter has a 50 Ohm impedance. This RF adapter has a female to female gender configuration which provides easier connections in tighter spaces. Our type N to QMA adapter is between series coaxial adapter design. This 50 Ohm type N adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 6 GHz. Type N female to QMA female adapter is one of the many RF components that ship same day as they are ordered. PE91710 female type N to female QMA adapter has a straight body. This Pasternack straight type N coax adapter is an in-line RF adapter. RF adapters are often used to enable connections between two connector types that would otherwise not mate. Our type N female to QMA female adapter PE91710 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This high-quality adapter from Pasternack has a type N to QMA connector is made from brass. Our type N radio frequency adapter can also be used to protect connectors on expensive equipment where the number of connect/ disconnect cycles is high. This type N to QMA radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the high-quality 6 GHz radio frequency adapter that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
25
|
- 1 $53.9900
- 10 $51.8300
- 25 $49.6700
- 100 $47.5100
- Show All
|
Buy Now
|
|
PE7017-10
D#: PE7017-10
|
Pasternack Enterprises
|
Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 25 Watt, VSWR Maximum: 1.4:1, Attenuation: 10 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, N Male to N Female Black Anodized Aluminum Heatsink Body Rated to 25 Watts Up to 18 GHz. PE7017-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7017-10 10 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 25 Watts at the stated attenuation value. Our fixed RF attenuator PE7017-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
Min Qty:
1
Package Multiple:
1
|
14
|
- 1 $920.0000
- 5 $883.2000
- 10 $846.4000
|
Buy Now
|
|
PE7317-10
D#: PE7317-10
|
Pasternack Enterprises
|
Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 50 Watt, VSWR Maximum: 1.6:1, Attenuation: 10 dB, Connector Series 1: N, Connector Gender 1: Female, Connector Series 2: N, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, N Female To N Male Directional Black Anodized Aluminum Heatsink Body Rated To 50 Watts Up To 18 GHz. PE7317-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a female gender on side 1 and a type N male connector on side 2. The Pasternack PE7317-10 10 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 50 Watts at the stated attenuation value. Our fixed RF attenuator PE7317-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
Min Qty:
1
Package Multiple:
1
|
14
|
- 1 $890.0000
- 5 $854.4000
- 10 $818.8000
|
Buy Now
|
|
PE51710
D#: PE51710
|
Pasternack Enterprises
|
Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 18 GHz, Interface Type 1: Thru Hole. SMA Female Right Angle Commercial Grade Connector Solder Attachment Thru Hole PCB. PE51710 SMA female right angle PCB connector has an interface type of SMA female which is compatible with thru hole cables and has an impedance of 50 Ohms. Pasternack's SMA female connector uses solder as an attachment method. Our female SMA right angle PCB connector provides a maximum frequency of 18 GHz. Our high-quality radio frequency co-axial connector is used for general purpose test and printed circuit board applications. This SMA female RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack right angle SMA female PCB connector has a PTFE dielectric type. Pasternack's SMA PCB connector has a brass body with gold over nickel over copper plating. Our PE51710 SMA right angle connector uses a gold over nickel over copper-plated phosphor bronze contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. This right angle SMA connector has a gold over nickel over copper inner contact plating. This PCB RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our right angle SMA female connector has a length of 0.6 inches, a width of 0.55 inches, and a weight of 0.45 lbs. This Pasternack commercial grade right angle female SMA connector will ship the same business day as purchased. Our SMA right angle female connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.
Min Qty:
1
Package Multiple:
1
|
10
|
- 1 $10.1900
- 25 $9.6800
- 50 $9.1700
- 100 $8.7600
- Show All
|
Buy Now
|
|
PE3W21710
D#: PE3W21710
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. SMA Male to MCX Plug Cable Using PE-P086HF Coax. PE3W21710 is a SMA male to MCX plug cable using PE-P086HF coax. This Pasternack SMA male to MCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. Our male SMA to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21710 SMA male to MCX plug cable assembly is constructed with PE-P086HF coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
RECOM Power 
TE Connectivity 
SiTime Corporation 
Rochester Electronics 
Master Electronics 
Coilcraft Direct 
Flip Electronics 
Dynamic Solutions GmbH 
Sensible Micro Corporation 
Kepictronics Inc. 
ANDE Electronics 
Microchip USA 
Ameya Holding Limited 
Component Stockers 
PEI Genesis 
DB Roberts 
Kurrent Technology 
Allelco Limited 
Chip-Germany GmbH 
Bisco Industries 
Interstate Connecting Components 
West Coast Components Inc. 
L-com US 
Sager 
Richardson RFPD 
Bristol Electronics 
ComSIT USA 
ICMILES Electronics Ltd 
Time Way Electronics Limited 
C Plus Electronics 
TestEquity LLC 
Quest Components 
Techni-Tool, Inc. 
North Star Micro Electronics 
Velocity Electronics 
Commodity Components Intl 
NAC 
Axis Part Limited 
Powell Electronics 
ICProFast Technology 
Tencell 
PUI 
Unicom Electronics 
Sierra IC 
LIBRA Elektronik GmbH 
New Strength Electronic Co., Limited 
Karl Kruse GmbH & Co KG 
YIC International Co., Limited 
Chip Stock 
LCSC 
Rutronik 
NexGen Digital
Avnet Silica 
IC Components Limited 
Tedss 
ACDS 
AMH Components Ltd 
Vyrian 
EBV Elektronik 
R&J Components 
Utmel Electronic 
Opulent Electronics Inc. 
MountainView Components Inc. 
Win Source Electronics 
Cytech Systems Limited 
Perfect Parts Corporation 
CXDA Electronics 
New Advantage Corporation 
Silitech Components Inc. 
J2 Sourcing 
GlobalTek Components 
Metaverse IC Inc. 
JRH Electronics 
Chips Pulse Industry Limited 
Avnet Abacus 
Futuretech Components Ltd 
Greenchips 
Neutron USA 
Shengyu Electronics Technology Limited 
Pasternack Enterprises US 
ES Components 
ICHOT TECHNOLOGY LIMITED