|
PE3C6202-50CM
D#: PE3C6202-50CM
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 19.685 inches. Plenum N Male to N Male Low PIM Cable 50 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum N male to N male low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum N male to N male low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-NM-LP type N to TC-250-NM-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-NM-LP type N cable connection on one end and TC-250-NM-LP N type cable connection on the other. Our low PIM TC-250-NM-LP type N to TC-250-NM-LP type N cable assemblies have a male gender on end 1 and male on end 2. This TC-250-NM-LP type N to TC-250-NM-LP type N cable is a male to male coax assembly, PE3C6202-50CM, can also be known as a low PIM TC-250-NM-LP N type plug to TC-250-NM-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-250-NM-LP N type plug to TC-250-NM-LP type N plug cable assembly PE3C6202-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-NM-LP N cable assembly is manufactured with TC-250-NM-LP type N to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-NM-LP N type male to TC-250-NM-LP type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-250-NM-LP N type plug to TC-250-NM-LP type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-NM-LP type N to TC-250-NM-LP N type cable assembly for quick shipment worldwide. Variations of TC-250-NM-LP type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum N male to N male low PIM cable 50 cm length using SPP-250-LLPL coax using Times Microwave parts.
Min Qty:
1
Package Multiple:
1
|
798
|
- 1 $103.9900
- 25 $98.7900
- 50 $93.5900
- 100 $89.4300
- Show All
|
Buy Now
|
|
PE3FCA202-5M
D#: PE3FCA202-5M
|
Pasternack Enterprises
|
Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to SC UPC, OM4 Multimode Distribution Cable, 4.5mm Plenum, 2.0mm breakout, Aqua-5M. Pasternack’s PE3FCA202-5M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 5-meter long 4-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA202-5M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
46
|
- 1 $141.9900
- 5 $136.3100
- 10 $130.6300
- 25 $124.9500
- Show All
|
Buy Now
|
|
PE3FCA420-25M
D#: PE3FCA420-25M
|
Pasternack Enterprises
|
Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 6.2 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 12-Fiber LC UPC to SC UPC, OM4 Multimode Distribution Cable, 6.2mm LSZH, 2.0mm breakout, Aqua-25M. Pasternack’s PE3FCA420-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 12-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 12-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA420-25M fiber optic cable with a 6.2 mm cable diameter and 47 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
15
|
- 1 $405.9900
- 5 $389.7500
- 10 $373.5100
- 25 $357.2700
- Show All
|
Buy Now
|
|
PE-T2025
D#: PE-T2025
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $269.9900
- 10 $259.1900
- 25 $248.3900
|
Buy Now
|
|
PE88X2025
D#: PE88X2025
|
Pasternack Enterprises
|
Key Specifications, Output Connector: WR-12 Waveguide with UG-387/U Flange, Connector Input: SMA Female, Minimum Output Frequency: 60 GHz, Maximum Output Frequency: 90 GHz, Output Frequency Band: E band, Multiplication Factor: 6 X, Multiplier Type: Active, Typical Output Power: 20 dB, Typical Input Power: 3 dB. WR-12 Waveguide with UG-387/U Flanged 6x Active Frequency Multiplier, E band, 60 GHz to 90 GHz Frequency and +20 dBm Power Outputs. All WR-12 waveguide with UG-387/U flanges active 6X multipliers, (aka doublers) from Pasternack's exclusive waveguide frequency connector series, have same-day shipping internationally for all online or phone-in purchases. We supply over 100,000 microwave, RF, and millimeter-wave components including these frequency 6X waveguide doublers (or multipliers) PE88X2025 that can multiply an input power ranging as low as 1 dBm to 3 dBm into as much as 20 dBm. Our active frequency 6X multiplier is manufactured to handle a E band frequency input range of 10 GHz to 15 GHz and E band 60 GHz to 90 GHz output. Call or go online to get PE88X2025 active 1 dBm to 3 dBm waveguide doublers with that are kept in our facility certified to ISO 9001:2015, stocked for same-day, worldwide trade. These microwave doublers with UG-387/U can multiply a 10 GHz to 15 GHz input signal into a larger harmonic output of E band 60 GHz to 90 GHz. Pasternack is the optimal place to buy rugged aluminum waveguide radio frequency doublers because unlike our competitors, we keep active multipliers model PE88X2025 with feed-thru-pin SMA female flanges constantly in stock. Expert technical support and 60 GHz to 90 GHz industry-leading output frequency are just two things that are always available with our top-tier female SMA 6X multipliers with -15 dBc harmonic suppression and UG-387/U pin connectors. Pasternack offers a deep and broad selection of over 100,000 RF microwave components like this frequency multiplier with 231 mA of DC current and SMA female to WR-12 waveguide with UG-387/U flanges and feed-thru-pin connectors. 6X multipliers with -15 dBc harmonic suppression send 60 GHz input signals through bandpass filters to select the desired harmonics multiplied to 90 GHz output. These WR-12 waveguide with UG-387/U flanges feed-thru-pin waveguides with aluminum UG-387/U flanged connectors have a typical input VSWR (voltage standing wave ratio) of 2.5:1 and a DC current bias of 231 mA. E band waveguide 3 dBm to 20 dBm doublers operate at -15 dBc harmonic suppression in the E band 60 GHz to 90 GHz range of frequencies. Throughout the whole process of E band signal and power amplification this 60 GHz to 90 GHz frequency multiplier with waveguide connection typically has an input drive level between 1 - 10 dBm and a maximum loss of only -15 dB. The waveguide SMA female series UG-387/U flanges connection can withstand input frequencies of 10 GHz - 15 GHz multiplied to 90 GHz - 60 GHz, are globally available for shipping ISO 9001:2015 certified, with CAD drawings for each WR-12 waveguide with UG-387/U flanges aluminum feed-thru-pin frequency doubler purchased. Pasternack well-made doubler E band WR-12 waveguide with UG-387/U flanges frequency active multipliers are regularly used for communication test equipment and applications of RADAR/satellite/wireless, across the E band 60 GHz-90 GHz frequencies. Downloadable dimensions and specifications in our PDF datasheets avaiable: height of 1.704 in., width of 1.673 in., length of 1.673 in., are REACH compliant operating in the temperature range of -40°C - 80°C and ship fast the same day you ordered. For questions or aid in ordering WR-12 waveguide with UG-387/U flanges active no limit multiplier modules just trust in the Pasternack.com specialized customer service sales team and check-out our hassle-free online interface here for 10 dBm 6X multipliers.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $12,150.0000
- 25 $11,542.5000
- 50 $10,935.0000
- 100 $10,449.0000
- Show All
|
Buy Now
|
|
PE3C2025LF-72
D#: PE3C2025LF-72
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. N Male to TNC Male Right Angle Cable 72 Inch Length Using RG400 Coax, LF Solder., Radio frequency assembly N male to TNC male right angle cable 72 inch length using RG400 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to TNC male right angle cable 72 inch length using RG400 coax, LF solder, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle TNC cable connection on the other. Our type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2025LF-72 can also be known as a N type plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C2025LF-72 is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency N type male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2025LF-72 can also be used in the other direction and will be right angle TNC male to type N male cable assembly if the opposite connectivity is required. Type N plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male right angle cable 72 inch length using RG400 coax, LF solder.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $191.9900
- 25 $182.3900
- 50 $172.7900
- 100 $165.1100
- Show All
|
Buy Now
|
|
PE3C2025LF-6
D#: PE3C2025LF-6
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. N Male to TNC Male Right Angle Cable 6 Inch Length Using RG400 Coax, LF Solder., Radio frequency assembly N male to TNC male right angle cable 6 inch length using RG400 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male to TNC male right angle cable 6 inch length using RG400 coax, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and right angle TNC cable connection on the other. Our type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2025LF-6 can also be known as a N type plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C2025LF-6 is built with RG400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency type N male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2025LF-6 can also be used in the other direction and will be right angle TNC male to type N male cable assembly if the opposite connectivity is required. N type plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male right angle cable 6 inch length using RG400 coax, LF solder.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $96.9900
- 25 $92.1400
- 50 $87.2900
- 100 $83.4100
- Show All
|
Buy Now
|
|
PE3W20253LF
D#: PE3W20253LF
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. SSMC Jack Bulkhead to BNC Male Cable Using PE-SR405AL Coax, LF Solder. PE3W20253LF is a SSMC jack bulkhead to BNC male cable using PE-SR405AL coax. This Pasternack SSMC jack bulkhead to BNC male cable assembly uses a 50 Ohm SSMC for connector 1 and a 50 Ohm BNC for connector 2. Our jack SSMC bulkhead to male BNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W20253LF SSMC jack bulkhead to BNC male cable assembly is constructed with PE-SR405AL coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W20250
D#: PE3W20250
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. N Male to SMA Male Cable Using PE-P195 Coax. PE3W20250 is a N male to SMA male cable using PE-P195 coax. This Pasternack N male to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our male N to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20250 N male to SMA male cable assembly is constructed with PE-P195 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W20250LF/HS
D#: PE3W20250LF/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SMA Male to N Male Cable Using PE-P195 Coax with HeatShrink, LF Solder. PE3W20250LF/HS is a SMA male to N male cable using PE-P195 coax. This Pasternack SMA male to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20250LF/HS SMA male to N male cable assembly is constructed with PE-P195 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
SiTime Corporation 
TE Connectivity 
Rochester Electronics 
Coilcraft Direct 
Flip Electronics 
Tencell 
Sensible Micro Corporation 
Microchip USA 
Bristol Electronics 
Ameya Holding Limited 
Powell Electronics 
Interstate Connecting Components 
AERI 
Hermes Engineering 
DB Roberts 
Dynamic Solutions GmbH 
Richardson RFPD 
Chip-Germany GmbH 
Quest Components 
Component Stockers 
NAC 
Waytek, Inc. 
PEI Genesis 
Time Way Electronics Limited 
IBS Electronics 
Unikey Electronic Pte Ltd 
ICHOME Technology 
PUI 
North Star Micro Electronics 
Kepictronics Inc. 
ComSIT USA 
Kurrent Technology 
Sager 
ICMILES Electronics Ltd 
Axis Part Limited 
Pasternack Enterprises US 
Unibetter Technology Co., Ltd 
Rutronik 
R&J Components 
Venkel Ltd. 
Neutron USA 
Utmel Electronic 
IC Components Limited 
Win Source Electronics 
GlobalTek Components 
Tedss 
Silitech Components Inc. 
Avnet Abacus 
Sense Electronic Company Limited 
LIBRA Elektronik GmbH 
MountainView Components Inc. 
New Advantage Corporation 
ICHOT TECHNOLOGY LIMITED 
Unicom Electronics 
Chip Stock 
ACDS 
Avnet Silica 
Greenchips 
EBV Elektronik 
Shengyu Electronics Technology Limited 
Vyrian 
LCSC 
Perfect Parts Corporation 
Cytech Systems Limited 
NexGen Digital
Sierra IC 
YIC International Co., Limited 
Futuretech Components Ltd