|
PE38300-9
D#: PE38300-9
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 9 inches. Reverse Polarity SMA Female Bulkhead to UMCX Plug Cable 9 Inch Length Using RG178 Coax., Radio frequency assembly reverse polarity SMA female bulkhead to UMCX plug cable 9 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA female bulkhead to UMCX plug cable 9 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA bulkhead cable connection on one end and right angle UMCX cable connection on the other. Our reverse polarity SMA to right angle UMCX cable assemblies have a female gender on end 1 and plug on end 2. This reverse polarity SMA to UMCX cable is a female to plug coax assembly, PE38300-9, can also be known as a reverse polarity SMA jack to right angle UMCX male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA jack to UMCX male cable assembly PE38300-9 is built with RG178 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle UMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this reverse polarity SMA female bulkhead to UMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE38300-9 can also be used in the other direction and will be right angle UMCX plug to reverse polarity SMA female bulkhead cable assembly if the opposite connectivity is required. SMA reverse polarity jack bulkhead to UMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA female bulkhead to UMCX plug cable 9 inch length using RG178 coax.
Min Qty:
1
Package Multiple:
1
|
179
|
- 1 $61.9900
- 25 $58.8900
- 50 $55.7900
- 100 $53.3100
- Show All
|
Buy Now
|
|
PE15A63009
D#: PE15A63009
|
Pasternack Enterprises
|
Key Specifications, Gain: 40 dB, Power Output: 10 dBm P1dB, Frequency, Min: 2.6 GHz, Frequency, Max: 3.1 GHz, Noise Figure, Max: 1.6 dB, Design: Input Protected Low Noise, Connector Series: SMA. 1.2 dB NF Input Protected Low Noise Amplifier, Operating from 2.6 GHz to 3.1 GHz with 40 dB Gain, 10 dBm P1dB and SMA. PE15A63009 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 2.6 GHz and maximum frequency of 3.1 GHz. The significantly low noise figure of this radio frequency amplifier is 1.6 dB with a typical gain of 40 dB. input protected LNA amplifier PE15A63009 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
10
|
- 1 $635.0000
- 5 $609.6000
- 10 $584.2000
|
Buy Now
|
|
PE80T3009
D#: PE80T3009
|
Pasternack Enterprises
|
Key Specifications. Waveguide Power Detector Type U Band Waveguide Size WR-19 Flange Destination UG-383/U-M Flange Type Round Cover DC Connector SMA Female Material and Plating Brass and Gold Frequency Range 40 GHz to 60 GHz Voltage Sensitivity 1100 mV/mW Maximum RF Input Power +17 dBm Tangential Sensitivity -50 dBm Sensitivity Flatness +/- 2dB Input Dynamic Range -55 dBm to +10 dBm Output Voltage Polarity Positive Temperature (Operating Range) 0 to +50 deg C Length 1.104in [28.04 mm] Width 0.89in [22.61 mm] Height 1.114in [28.3 mm] Weight 0.05lbs [22.68 g]. U Band WR-19 Waveguide Power Detector, U Band, 40 GHz to 60 GHz, Positive Output Voltage Polarity, UG-383/U-M Flange. The PE80T3009 is a WR-19 Waveguide Power Detector, operating across the U Band from 40 GHz to 60 GHz. This 50 Ohm design features Positive Output Voltage Polarity. Impressive typical performacne includes Video Sensitivity of 1100 mV/mW with +/- 2dB flatness, Tangential Sensitivity of -50 dBm, Input Dynamic Range of -55 dBm to +10 dBm, and Detection Speed Rise Time of 5 nsec. Maximum input power handling is +17 dBm. The rugged and small size Brass package design is gold plated and supports a UG-383/U-M waveguide flange pattern at RF input and output ports. The DC output port uses an SMA Female connector. The module operates across a temperature range from 0°C to +50°C.
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $4,030.0000
- 5 $3,868.8000
- 10 $3,707.6000
- 25 $3,546.4000
- Show All
|
Buy Now
|
|
PE3C3009/HS
D#: PE3C3009/HS
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W03009
D#: PE3W03009
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Male to MCX Plug Cable Using RG316-DS Coax. PE3W03009 is a SMA male to MCX plug cable using RG316-DS coax. This Pasternack SMA male to MCX plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm MCX for connector 2. Our male SMA to plug MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03009 SMA male to MCX plug cable assembly is constructed with RG316-DS coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE15A3009
D#: PE15A3009
|
Pasternack Enterprises
|
Key Specifications, Power Output: 28 dBm Psat, Frequency, Min: 2 GHz, Frequency, Max: 24 GHz, Gain, Min: 10 dB, Gain, Typical: 12 dB, Gain Flatness: 0.75 dB, 3rd Intercept Point: 35 dB, RF Input VSWR Max: 2.2:1, RF Output VSWR Max: 2.2:1, Connector Series: 2.92mm. 28 dBm Psat, 2 GHz to 24 GHz, Medium Power Broadband Amplifier, 12 dB Gain, 35 dBm IP3, 4 dB NF, 2.92mm. PE15A3009 medium power broadband amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized medium power broadband amplifier uses 2.92mm connectors at 50 Ohm. This 2.92mm broadband amplifier has wide-band capability with a minimum frequency of 2 GHz and maximum frequency of 24 GHz. The minimum gain of this broad-band radio frequency amplifier is 10 dB with a typical gain of 12 dB. Pasternack broadband amplifier PE15A3009 is rated at 28 dBm Psat, 2.2:1 input VSWR maximum and 2.2:1 output VSWR max. Our broad band radio frequency amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $2,730.0000
- 5 $2,675.4000
- 10 $2,620.8000
|
Buy Now
|
|
PE3009LF/HS
D#: PE3009LF/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SMA Male to N Female Cable Using RG142 Coax with HeatShrink, RoHS. PE3009LF/HS is a SMA male to N female cable using RG142 coax. This Pasternack SMA male to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3009LF/HS SMA male to N female cable assembly is constructed with RG142 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W13009
D#: PE3W13009
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG141A/U, RF Cable Type: RG141, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Female Bulkhead Cable Using RG141 Coax. PE3W13009 is a SMA female bulkhead to SMA female bulkhead cable using RG141 coax. This Pasternack SMA female bulkhead to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13009 SMA female bulkhead to SMA female bulkhead cable assembly is constructed with RG141 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W23009
D#: PE3W23009
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Black FAKRA Jack to TNC Male Cable Using LMR-100A-UF Coax. PE3W23009 is a FAKRA jack to TNC male cable using LMR-100A-UF coax. This Pasternack FAKRA jack to TNC male cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm TNC for connector 2. Our jack FAKRA to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W23009 FAKRA jack to TNC male cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3009LF
D#: PE3009LF
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SMA Male to N Female Cable Using RG142 Coax, RoHS. PE3009LF is a SMA male to N female cable using RG142 coax. This Pasternack SMA male to N female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3009LF SMA male to N female cable assembly is constructed with RG142 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
Rochester Electronics 
TE Connectivity 
Master Electronics 
Flip Electronics 
Kepictronics Inc. 
Component Stockers 
Quest Components 
Hermes Engineering 
PEI Genesis 
ComSIT USA 
Powell Electronics 
Sager 
Microchip USA 
NAC 
Interstate Connecting Components 
Sensible Micro Corporation 
Axis Part Limited 
DB Roberts 
Allelco Limited 
Time Way Electronics Limited 
North Star Micro Electronics 
AERI 
L-com US 
Dynamic Solutions GmbH 
Ameya Holding Limited 
PUI 
ICMILES Electronics Ltd 
Richardson RFPD 
Kurrent Technology 
Waytek, Inc. 
Tencell 
Bisco Industries 
Bristol Electronics 
Silitech Components Inc. 
IC Components Limited 
New Advantage Corporation 
Cytech Systems Limited 
Utmel Electronic 
Shengyu Electronics Technology Limited 
Avnet Silica 
Avnet Abacus 
Perfect Parts Corporation 
ACDS 
Vyrian 
R&J Components 
New Strength Electronic Co., Limited 
LIBRA Elektronik GmbH 
Win Source Electronics 
LCSC 
Neutron USA 
Chip Stock 
Sense Electronic Company Limited 
Sierra IC 
GlobalTek Components 
NexGen Digital
Greenchips 
YIC International Co., Limited 
Rutronik 
Tedss 
Unicom Electronics 
EBV Elektronik 
Pasternack Enterprises US 
MountainView Components Inc.