|
PE3320-12
D#: PE3320-12
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male to N Female Bulkhead Cable 12 Inch Length Using RG58 Coax., Radio frequency assembly N male to N female bulkhead cable 12 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 12 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our type N to N type cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3320-12, can also be known as a N type plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3320-12 is built with RG58 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this type N male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3320-12 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. N type plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 12 inch length using RG58 coax.
Min Qty:
1
Package Multiple:
1
|
1896
|
- 1 $87.9900
- 25 $83.5900
- 50 $79.1900
- 100 $75.6700
- Show All
|
Buy Now
|
|
PE3M0320-12
D#: PE3M0320-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Pin to SMA Female Cable 12 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0320-12 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0320-12 between-series RF cable has 0.78 inches of repeated minimum bend radius. BMZ pin to SMA female cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0320-12 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
23
|
- 1 $251.9900
- 10 $241.9100
- 25 $231.8300
- 100 $221.7500
- Show All
|
Buy Now
|
|
PE3FCA320-15M
D#: PE3FCA320-15M
|
Pasternack Enterprises
|
Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNP, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber SC APC to SC APC, OS2 Single Mode Distribution Cable, 5.0mm Plenum, 2.0mm breakout, Yellow-15M. Pasternack’s PE3FCA320-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 6-fiber cable assembly is equipped with SC/APC to SC/APC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA320-15M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/APC to SC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
16
|
- 1 $189.9900
- 5 $182.3900
- 10 $174.7900
- 25 $167.1900
- Show All
|
Buy Now
|
|
PE3FCA320-10M
D#: PE3FCA320-10M
|
Pasternack Enterprises
|
Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNP, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber SC APC to SC APC, OS2 Single Mode Distribution Cable, 5.0mm Plenum, 2.0mm breakout, Yellow-10M. Pasternack’s PE3FCA320-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 6-fiber cable assembly is equipped with SC/APC to SC/APC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA320-10M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/APC to SC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
16
|
- 1 $185.9900
- 5 $178.5500
- 10 $171.1100
- 25 $163.6700
- Show All
|
Buy Now
|
|
PE33201LF
D#: PE33201LF
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W13201
D#: PE3W13201
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female Bulkhead to Reverse Polarity SMA Male Right Angle Cable Using LMR-195 Coax. PE3W13201 is a reverse polarity TNC female bulkhead to reverse polarity SMA male right angle cable using LMR-195 coax. This Pasternack reverse polarity TNC female bulkhead to reverse polarity SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity female TNC bulkhead to reverse polarity male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13201 TNC reverse polarity female bulkhead to SMA reverse polarity male right angle cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W03201
D#: PE3W03201
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG11A/U, RF Cable Type: RG11, RF Cable Impedance: 75 Ohm. 75 Ohm BNC Male to 75 Ohm BNC Male Cable Using 75 Ohm RG11 Coax. PE3W03201 is a BNC male to BNC male cable using RG11 coax. This Pasternack BNC male to BNC male cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our male BNC to male BNC cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W03201 BNC male to BNC male cable assembly is constructed with RG11 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PEWGA3201
D#: PEWGA3201
|
Pasternack Enterprises
|
Key Specifications, Waveguide Size : WR-28, Low Max Noise Figure : 3 dB, Waveguide Frequency Band : Ka, Minimum Frequency : 26.5 GHz, Max Frequency : 40 GHz, Small Signal Gain: 33 dB, Flange Type and Size: UG-599/U Flange, Saturated Output Power: 18 dBm, Typical Output Power: 24 dBm. 2.8 dB Low Noise Amplifier (LNA), 26.5 to 40 GHz Frequencies in Ka Band, WR-28 Waveguide connectors with UG-599/U Flanges, 33 dB Gain., PEWGA3201 by Pasternack is a mid-power Waveguide Low Noise Amplifier (LNA) with a frequency band of Ka eligible for same day shipping worldwide. This WR-28 high frequency (HF) waveguide LNA operates between the frequencies of 26.5 GHz – 40 GHz with a typical gain of 33 dB. The PEWGA3201 Ka band LNA operates between -40 deg C to 80 deg C. Pasternack's 26.5 GHz – 40 GHz low noise amplifiers have a maximum noise figure of only 3 dB and a typical gain of 33 dB. The waveguide WR-28 low noise 3 dB amp has a max 12 Vdc integrated voltage regulation with 280 mA of typical operating Vdc current. This high reliability Ka band LNA maintains 33 dB of gain, and an exceptionally low 3 dB figure of noise, it's design is unconditionally stable, exhibiting an impressive 18 dBm of saturated power output (Psat). This HF LNA PEWGA3201 expresses a max 12 Vdc of voltage supply with 18 dBm of typical power output and it's Ka-band low noise figure amplification is designed for use in military, labs, telecom infrastructure, and even space applications. Contact Pasternack's knowledgeable support staff for assistance with this 40 GHz Ka-band frequency, 3 dB noise figure WR-28 amplifier. Download our UG-599/U RF LNA PDF datasheet PEWGA3201 with specifications and our CAD drawing of the of this 3 dB waveguide low noise UG-599/U amplifier with dimensions for details. The 280 mA WR-28 high frequency LNA is built to be sturdy and is designed for dozens of applications with its WR-28 I/O waveguide ports for UG-599/U waveguide flanges. Our 280 mA aluminum waveguide LNA's dimensions and size specifications: 1.5 inches long, 0.937 inches tall, 1.5 inches wide, and weight of 0.2 lbs. Order your resilient, high-reliability 26.5 GHz 40 GHz low noise amplifiers today, through the website or by phone, we're ready to pack and ship these high-quality low noise 280 mA WR-28 waveguide amplifier LNA's anywhere in the world. This low noise 280 mA RF amplifier is ready for same day purchase and is complete with a maximum noise figure no more than 3 dB. Pasternack's PEWGA3201 waveguide HF LNA is housed within aluminum and plated with gold, which makes for a sturdy and reliable unit. This 26.5 GHz – 40 GHz Ka band LNA with 18 dBm power is part of over 100,000 RF, microwave, and millimeter wave components that we keep in stock. Pasternack stocks a wide array of small 33 dB signal low noise amplifier products that ship same day from our warehouse for all your RF, microwave, and millimeter wave WR-28 LNA needs.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $9,290.0000
- 5 $8,918.4000
- 10 $8,546.8000
- 25 $8,175.2000
- Show All
|
Buy Now
|
|
PE3W13201/HS
D#: PE3W13201/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to Reverse Polarity TNC Female Bulkhead Cable Using LMR-195 Coax with HeatShrink. PE3W13201/HS is a reverse polarity SMA male right angle to reverse polarity TNC female bulkhead cable using LMR-195 coax. This Pasternack reverse polarity SMA male right angle to reverse polarity TNC female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to reverse polarity female TNC bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13201/HS SMA reverse polarity male right angle to TNC reverse polarity female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C3201/HS
D#: PE3C3201/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50. Water Blue FAKRA Plug to BNC Male Cable Using RG174 Coax. PE3C3201/HS is a FAKRA plug to BNC male cable using RG174 coax. This Pasternack FAKRA plug to BNC male cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm BNC for connector 2. Our plug FAKRA to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3201/HS FAKRA plug to BNC male cable assembly is constructed with RG174 coax and the maximum VSWR is 1.4:1.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
SiTime Corporation 
TE Connectivity 
Rochester Electronics 
Coilcraft Direct 
Flip Electronics 
Component Stockers 
Bisco Industries 
DST International Group (HK) Limited 
Kurrent Technology 
Sager 
ComSIT USA 
Waytek, Inc. 
ICHOME Technology 
Component Search 
ICMILES Electronics Ltd 
C Plus Electronics 
Time Way Electronics Limited 
Bristol Electronics 
L-com US 
PEI Genesis 
Microchip USA 
Hermes Engineering 
Kepictronics Inc. 
Ameya Holding Limited 
NAC 
IBS Electronics 
Unikey Electronic Pte Ltd 
Sensible Micro Corporation 
DB Roberts 
Dynamic Solutions GmbH 
Richardson RFPD 
Chip-Germany GmbH 
Powell Electronics 
Interstate Connecting Components 
North Star Micro Electronics 
LIBRA Elektronik GmbH 
Sierra IC 
New Advantage Corporation
Vyrian 
Silitech Components Inc. 
Perfect Parts Corporation 
Unibetter Technology Co., Ltd 
MountainView Components Inc. 
Tedss 
Sense Electronic Company Limited 
Rutronik 
NexGen Digital
Avnet Abacus 
Pasternack Enterprises US 
EBV Elektronik 
IC Components Limited 
GlobalTek Components 
Win Source Electronics 
Chip Stock 
New Strength Electronic Co., Limited 
YIC International Co., Limited 
R&J Components 
Cytech Systems Limited 
Avnet Silica 
Unicom Electronics 
Venkel Ltd. 
ICHOT TECHNOLOGY LIMITED 
Shengyu Electronics Technology Limited 
Futuretech Components Ltd 
Greenchips