|
PE3W16550-100CM
D#: PE3W16550-100CM
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 39.3701 inches. SMB Jack Bulkhead to MCX Plug Right Angle Low Loss Cable 100 CM Length Using LMR-100 Coax., Radio frequency assembly SMB jack bulkhead to MCX plug right angle low loss cable 100 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB jack bulkhead to MCX plug right angle low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMB bulkhead cable connection on one end and a right angle MCX cable connection on the other. Our low loss SMB to right angle MCX cable assembly has a jack gender on end 1 and a plug on end 2. PE3W16550-100CM can also be known as a low loss SMB female to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16550-100CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our bulkhead SMB jack to right angle MCX plug cable has a maximum VSWR of 1.4:1. SMB female to MCX male cable assembly PE3W16550-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16550-100CM can also be used in the other direction and will be a right angle MCX plug to SMB jack bulkhead cable assembly if the opposite connectivity is required. Low loss SMB female bulkhead to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to MCX cable assembly for quick shipment worldwide. Variations of SMB and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
752
|
- 1 $71.9900
- 25 $68.3900
- 50 $64.7900
- 100 $61.9100
- Show All
|
Buy Now
|
|
M39012/25-0106
D#: M39012/25-0106
|
Pasternack Enterprises
|
Key Specifications, Connector Series: BNC, Connector Gender: Male, Chain Option: Chain. BNC Male Open Circuit Connector Cap with 4 Inch Chain. Pasternack’s M39012/25-0106 RF coaxial connector cap (which can also be referred to as an RF connector dust cap in some cases) is available in a non-shorting design. This non-shorting RF connector cap has a BNC connector series and a male gender. Our BNC male non-shorting connector cap is manufactured with a brass body material and silver body plating. Our silver-plated dust cap comes with a 4-inch long chain to prevent loss and misplacement. Our M39012/25-0106 dust cap has a length of 0.7 inches, a width of 0.593 inches, and a height of 0.75 inches. These RF connector dust caps are essential for precision connectors to protect them from dust, corrosion, and other potential damage. Additional dimensions and specifications for this BNC male connector cap are on our downloadable PDF datasheet above. Our coaxial non-shorting protective dust cap is just one part of over one million RF components supplied by Pasternack. The M39012/25-0106 connector dust cap is in stock and will ship on the same business day as purchased. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF connector dust cap for your requirements.
Min Qty:
1
Package Multiple:
1
|
61
|
- 1 $53.9900
- 25 $51.8300
- 50 $50.2100
- 100 $49.1300
- Show All
|
Buy Now
|
|
PE5010-3
D#: PE5010-3
|
Pasternack Enterprises
|
Key Specifications, Tool Type: Crimp Tool Die, Hex Size: 0.255, 0.068. Crimp Tool Die With 0.128, 0.100 Size Hex Bit For Cable Type Works With PE5008 and PE5009. 0.128, 0.100 crimp tool PE5010-3 from Pasternack is just one part of our extensive line of in-stock RF coaxial tools for sale. This 0.128, 0.100 crimp tool works with RF connectors to create cable assemblies. Our crimp tool for 0.128, 0.100 coax has 0.100, 0.429 hex size. PE5010-3 0.128, 0.100 crimp tool is one of over 40,000 RF, microwave and millimeter wave components and tools supplied by Pasternack. This crimp tool for 0.128, 0.100 coaxial cable can be bought and shipped worldwide the same-day as with our other in-stock RF parts and tools.. Crimp Tool Die With 0.255, 0.068 Size Hex Bit For Cable Type Works With PE5008 and PE5009. Crimp tool die PE5010-3 from Pasternack is part of a huge number of in-stock RF coaxial connector and cable tools for sale. This die for coax cable connector crimp tool works with Pasternack crimp tool to create cable assemblies. Our RF coaxial crimp tool die has 0.255, 0.068 hex size. PE5010-3 coaxial connector crimp tool die is one of over 40,000 RF, microwave and millimeter wave components and tools supplied by Pasternack. This coax cable crimp die can be bought and shipped worldwide the same-day as with our other in-stock RF parts and tools.
Min Qty:
1
Package Multiple:
1
|
43
|
- 1 $307.9900
- 10 $295.6700
- 25 $283.3500
|
Buy Now
|
|
PE3FCA250-10M
D#: PE3FCA250-10M
|
Pasternack Enterprises
|
Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNR, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber SC APC to SC APC, OS2 Single Mode Indoor Distribution Cable, 4.5mm Riser, 2.0mm breakout, Yellow-10M. Pasternack’s PE3FCA250-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 4-fiber cable assembly is equipped with SC/APC to SC/APC connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA250-10M fiber optic cable with a 4.5 mm cable diameter and 34 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/APC to SC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
25
|
- 1 $147.9900
- 5 $142.0700
- 10 $136.1500
- 25 $130.2300
- Show All
|
Buy Now
|
|
PE5010-1
D#: PE5010-1
|
Pasternack Enterprises
|
Key Specifications, Hex Size Unit: Inch, Tool Type: Crimp Tool Die, Hex Size: 0.213, 0.068. Crimp Tool With 0.100, 0.429 Hex Sizes For RG9, RG11, RG87A, RG149, RG165, RG213, RG214, RG216, RG225, RG393. RG9, RG11, RG87A, RG149, RG165, RG213, RG214, RG216, RG225, RG393 crimp tool PE5010-1 from Pasternack is just one part of our extensive line of in-stock RF coaxial tools for sale. This RG9, RG11, RG87A, RG149, RG165, RG213, RG214, RG216, RG225, RG393 crimp tool works with RF connectors to create cable assemblies. Our crimp tool for RG9, RG11, RG87A, RG149, RG165, RG213, RG214, RG216, RG225, RG393 coax has 0.100, 0.429 hex size. PE5010-1 RG9, RG11, RG87A, RG149, RG165, RG213, RG214, RG216, RG225, RG393 crimp tool is one of over 40,000 RF, microwave and millimeter wave components and tools supplied by Pasternack. This crimp tool for RG9, RG11, RG87A, RG149, RG165, RG213, RG214, RG216, RG225, RG393 coaxial cable can be bought and shipped worldwide the same-day as with our other in-stock RF parts and tools.. Crimp Tool Die With 0.213, 0.068 Size Hex Bit For Cable Type Works With PE5008 and PE5009. Crimp tool die PE5010-1 from Pasternack is part of a huge number of in-stock RF coaxial connector and cable tools for sale. This die for coax cable connector crimp tool works with Pasternack crimp tool to create cable assemblies. Our RF coaxial crimp tool die has 0.213, 0.068 hex size. PE5010-1 coaxial connector crimp tool die is one of over 40,000 RF, microwave and millimeter wave components and tools supplied by Pasternack. This coax cable crimp die can be bought and shipped worldwide the same-day as with our other in-stock RF parts and tools.
Min Qty:
1
Package Multiple:
1
|
8
|
- 1 $343.9900
- 10 $330.2300
- 25 $316.4700
|
Buy Now
|
|
PEWAN650-10
D#: PEWAN650-10
|
Pasternack Enterprises
|
Key Specifications, Waveguide Size: WR-650, Frequency, Min: 1.13 GHz, Frequency, Max: 1.73 GHz, Beam Width V: 55, Beam Width H: 55. WR-650 Waveguide Standard Gain Horn Antenna Operating From 1.13 GHz to 1.73 GHz, 10 dBi Gain with CPR-650F Flange. Pasternack’s PEWAN650-10 WR-650 waveguide horn is also known as a waveguide horn antenna. This WR-650 standard gain horn waveguide antenna has a nominal gain of 10 dBi. Our waveguide horn can operate at frequencies ranging from 1.13 to 1.73 GHz. The standard gain horn antenna with linear polarization is suitable for test and measurement industries. This 10 dBi waveguide horn from Pasternack has an overall length of 11 inches, a width of 12.4 inches, and a weight of 7 lbs. Our WR-650 waveguide horn antenna has a typical vertical beam width of 55 degrees and a horizontal beam width of 55 degrees at 3 dB. Our antenna comes with a cpr-650f flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-650 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-650 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
4
|
- 1 $3,090.0000
- 5 $2,966.4000
- 10 $2,842.8000
- 25 $2,719.2000
- Show All
|
Buy Now
|
|
PE71S5010
D#: PE71S5010
|
Pasternack Enterprises
|
Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 300 MHz, Maximum Frequency: 3.5 GHz, Impedance: 50 Ohm, Maximum Input VSWR: 1.8:1, Maximum Insertion Loss: 1.2 dB, Minimum Isolation: 25 dB. Reflective SPDT PIN Diode Switch Operating From 30 MHz to 3.5 GHz Up to 100 Watt (+50 dBm) and Field Replaceable SMA with Heatsink. The PE71S5010 PIN diode switch from Pasternack has a reflective design with a SPDT switch configuration. Our RF reflective PIN diode switch uses SMA connectors at 50 Ohm impedance. This SMA PIN diode reflective switch has a minimum frequency of 300 MHz and a maximum frequency of 3.5 GHz. Make your online purchase right now to take advantage of our same-business-day shipping. This reflective SPDT radio frequency PIN diode switch has a female gender configuration and is designed to withstand a series of environmental test conditions including altitude, vibration, shock and humidity. Our PE71S5010 PIN diode switch has a gold-plated aluminum body. This PIN diode switch is rated at a 5 Vdc voltage. Our ultra-wideband RF PIN diode switch operates within a temperature range of -40 deg C to 85 deg C. This 50 Ohm SPDT PIN diode switch has a 1.8:1 maximum VSWR (Voltage Standing Wave Ratio). The maximum insertion loss of this SMA reflective switch is 1.2 dB with a minimum isolation of 25 dB. Additional specifications for this ultra-wideband SPDT PIN diode switch can be found on its PDF specification datasheet and CAD drawings. The reflective PIN diode radio frequency switch PE71S5010 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our reflective SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect ultra-wideband RF PIN diode switch for your requirement.
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $10,025.0000
- 5 $9,624.0000
- 10 $9,223.0000
- 25 $8,822.0000
- Show All
|
Buy Now
|
|
PE3M0150-100CM
D#: PE3M0150-100CM
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Temperature Conditioned SMA Female Bulkhead to N Female Bulkhead Low Loss Cable 100 cm Length Using PE-P142LL Coax., Pasternack temperature conditioned SMA female bulkhead to N female bulkhead low loss cable 100 cm length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0150-100CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability SMA to N type cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with SMA connection on one end and type N connection on the other. Our low loss SMA to type N cable assemblies have a female gender on end 1 and female on end 2. This SMA to type N cable is a female to female coax assembly. PE3M0150-100CM can also be known as a temperature conditioned low loss SMA jack to type N jack cable assembly and will be shipped the same day after it is purchased. SMA jack to N type jack cable assembly PE3M0150-100CM is built with PE-P142LL which is a flexible coax. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency SMA female to N type female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions. Also, PE3M0150-100CM can be used in the other direction and will be type N female to SMA female cable assembly. Pasternack high reliability low loss SMA jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for same-day shipment worldwide. Variations of PE45525 SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned SMA female bulkhead to N female bulkhead low loss cable 100 cm length using PE-P142LL coax.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $915.0000
- 25 $869.2500
- 50 $823.5000
- 100 $786.9000
- Show All
|
Buy Now
|
|
PE3W15010/HS
D#: PE3W15010/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm. TNC Male to TNC Female Cable Using LMR-240-FR Coax with HeatShrink. PE3W15010/HS is a TNC male to TNC female cable using LMR-240-FR coax. This Pasternack TNC male to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. Our male TNC to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15010/HS TNC male to TNC female cable assembly is constructed with LMR-240-FR coax, * LMR™ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C3250-100CM
D#: PE3C3250-100CM
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMA Male Right Angle to N Female Low Loss Test Cable 100 cm Length Using PE-P300LL Coax, RoHS., Radio frequency assembly SMA male right angle to N female low loss test cable 100 cm length using PE-P300LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to N female low loss test cable 100 cm length using PE-P300LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle SMA cable connection on one end and type N cable connection on the other. Our low loss test right angle SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE3C3250-100CM, can also be known as a low loss test right angle SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C3250-100CM is built with PE-P300LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3250-100CM can also be used in the other direction and will be N type female to right angle SMA male cable assembly if the opposite connectivity is required. Low loss test SMA right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to N female low loss test cable 100 cm length using PE-P300LL coax, RoHS.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $655.0000
- 25 $622.2500
- 50 $589.5000
|
Buy Now
|
Microchip Technology Inc 
Rochester Electronics 
SiTime Corporation 
TE Connectivity 
Coilcraft Direct 
Flip Electronics 
ICHOME Technology 
ComSIT USA 
PUI 
PEI Genesis 
Kurrent Technology 
Chip-Germany GmbH 
C Plus Electronics 
L-com US 
Bristol Electronics 
Time Way Electronics Limited 
Richardson RFPD 
Component Stockers 
DB Roberts 
R&J Components 
Component Search 
Unikey Electronic Pte Ltd 
Dynamic Solutions GmbH 
DST International Group (HK) Limited 
Bisco Industries 
Waytek, Inc. 
Powell Electronics 
Sensible Micro Corporation 
Interstate Connecting Components 
North Star Micro Electronics 
Hermes Engineering 
Sager 
NAC 
ICMILES Electronics Ltd 
Kepictronics Inc. 
Greenchips 
NexGen Digital
Venkel Ltd. 
Sierra IC 
Win Source Electronics 
Pasternack Enterprises US 
New Strength Electronic Co., Limited 
ICHOT TECHNOLOGY LIMITED 
Chip Stock 
Braemac Americas-Symmetry 
LCSC 
MountainView Components Inc. 
Neutron USA 
Sense Electronic Company Limited 
Tedss 
Perfect Parts Corporation 
IC Components Limited 
Cytech Systems Limited 
GlobalTek Components 
LIBRA Elektronik GmbH 
Futuretech Components Ltd 
Unicom Electronics 
RG Elektrotechnologie GmbH 
YIC International Co., Limited 
Silitech Components Inc. 
New Advantage Corporation
Vyrian 
Rutronik 
Unibetter Technology Co., Ltd