|
PE15A63028
D#: PE15A63028
|
Pasternack Enterprises
|
Key Specifications, Frequency, Min: 100 MHz, Frequency, Max: 18 GHz, Gain, Typical: 42 dB, Noise Figure, Max: 4 dB, Power Output: 16 dBm P1dB, 3rd Intercept Point: 27 dB, Connector Series: SMA, AC Voltage: 110/240 VAC. 42 dB Gain, 16 dBm P1dB, 0.1 GHz to 18 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 2.2 dB Noise Figure, SMA. PE15A63028 low noise broadband amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohms, and requires an AC voltage supply ranging from 110VAC minimum to 240VAC maximum. This SMA broadband low noise amplifier has wide-band capability with a minimum frequency of 100 MHz and maximum frequency of 18 GHz and has a noise figure of 4 dB maximum. The minimum gain of this broad-band low noise radio frequency amplifier is 38 dB with a typical gain of 42 dB. Pasternack broadband low noise amplifier PE15A63028 is rated at 16 dBm P1dB. Our broad band low noise radio frequency amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial broadband low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $9,801.0000
- 5 $9,408.9600
- 10 $9,016.9200
- 25 $8,624.8800
- Show All
|
Buy Now
|
|
PE3W05630-200CM
D#: PE3W05630-200CM
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Female Bulkhead to SMA Female Cable 200 cm Length Using LMR-400-UF Coax., Radio frequency assembly N female bulkhead to SMA female cable 200 cm length using LMR-400-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female bulkhead to SMA female cable 200 cm length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N bulkhead cable connection on one end and SMA cable connection on the other. Our N type to SMA cable assemblies have a female gender on end 1 and female on end 2. This type N to SMA cable is a female to female coax assembly, PE3W05630-200CM, can also be known as a type N jack to SMA jack cable assembly and will be shipped same-day as it is purchased. N type jack to SMA jack cable assembly PE3W05630-200CM is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N female bulkhead to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05630-200CM can also be used in the other direction and will be SMA female to N type female bulkhead cable assembly if the opposite connectivity is required. N type jack bulkhead to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SMA female cable 200 cm length using LMR-400-UF coax.
Min Qty:
1
Package Multiple:
1
|
83
|
- 1 $137.9900
- 25 $131.0900
- 50 $124.1900
- 100 $118.6700
- Show All
|
Buy Now
|
|
PE36302LF
D#: PE36302LF
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. HN Male to BNC Male Cable Using RG58 Coax, LF Solder. PE36302LF is a HN male to BNC male cable using RG58 coax. This Pasternack HN male to BNC male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm BNC for connector 2. Our male HN to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE36302LF HN male to BNC male cable assembly is constructed with RG58 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C6302-36
D#: PE3C6302-36
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405TN, RF Cable Type: RG405 Tinned, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. 2.92mm Male to SMA Male Cable 36 Inch Length Using Tinned RG405 Coax., Radio frequency assembly 2.92mm male to SMA male cable 36 inch length using tinned RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to SMA male cable 36 inch length using tinned RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.92mm to SMA cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 2.92mm cable connection on one end and SMA cable connection on the other. Our 2.92mm to SMA cable assembly has male gender on end 1 and male on end 2. PE3C6302-36 can also be known as a 2.92mm plug to SMA plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. 2.92mm plug to SMA plug cable assembly PE3C6302-36 is built with RG405 tinned which is a semi-rigid coax type. The Pasternack semi-rigid 2.92mm cable assembly is manufactured with 2.92mm to SMA cable connectors, has a 50 Ohm impedance and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has solder/solder attachment method and stainless steel body with gold plating.Additional dimensions, specifications and CAD drawings for this PE3C6302-36 RF cable are available on our downloadable PDF datasheet.PE3C6302-36 can also be used in the other direction and will be SMA male to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to SMA cable assembly for quick shipment worldwide. Variations of 2.92mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
42
|
- 1 $165.9900
- 25 $157.6900
- 50 $149.3900
- 100 $142.7500
- Show All
|
Buy Now
|
|
PE3W05630-24
D#: PE3W05630-24
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Female Bulkhead to SMA Female Cable 24 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N female bulkhead to SMA female cable 24 inch length using LMR-400-UF coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female bulkhead to SMA female cable 24 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type bulkhead cable connection on one end and SMA cable connection on the other. Our type N to SMA cable assemblies have a female gender on end 1 and female on end 2. This type N to SMA cable is a female to female coax assembly, PE3W05630-24, can also be known as a type N jack to SMA jack cable assembly and will be shipped same-day as it is purchased. N type jack to SMA jack cable assembly PE3W05630-24 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type female bulkhead to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05630-24 can also be used in the other direction and will be SMA female to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SMA female cable 24 inch length using LMR-400-UF coax.
Min Qty:
1
Package Multiple:
1
|
83
|
- 1 $107.9900
- 25 $102.5900
- 50 $97.1900
- 100 $92.8700
- Show All
|
Buy Now
|
|
PE3W06302
D#: PE3W06302
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: MCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. MCX Plug to N Female Cable Using LMR-100 Coax. PE3W06302 is a MCX plug to N female cable using LMR-100A coax. This Pasternack MCX plug to N female cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm N for connector 2. Our plug MCX to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06302 MCX plug to N female cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE15A63024
D#: PE15A63024
|
Pasternack Enterprises
|
Key Specifications, Frequency, Min: 10 MHz, Frequency, Max: 20 GHz, Gain, Typical: 29 dB, Noise Figure, Max: 5.5 dB, Power Output: 22 dBm P1dB, 3rd Intercept Point: 29 dB, Connector Series: SMA, AC Voltage: 110/240 VAC. 29 dB Gain, 22 dBm P1dB, 0.01 GHz to 20 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 3.5 dB Noise Figure, SMA. PE15A63024 low noise broadband amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohms, and requires an AC voltage supply ranging from 110VAC minimum to 240VAC maximum. This SMA broadband low noise amplifier has wide-band capability with a minimum frequency of 10 MHz and maximum frequency of 20 GHz and has a noise figure of 5.5 dB maximum. The minimum gain of this broad-band low noise radio frequency amplifier is 26 dB with a typical gain of 29 dB. Pasternack broadband low noise amplifier PE15A63024 is rated at 22 dBm P1dB. Our broad band low noise radio frequency amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial broadband low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $12,177.0000
- 5 $11,689.9200
- 10 $11,202.8400
- 25 $10,715.7600
- Show All
|
Buy Now
|
|
PE3W16302LF/HS
D#: PE3W16302LF/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to N Male Cable Using LMR-240 Coax with HeatShrink, LF Solder. PE3W16302LF/HS is a SMA male right angle to N male cable using LMR-240 coax. This Pasternack SMA male right angle to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA right angle to N coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16302LF/HS SMA male right angle to N male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W16302
D#: PE3W16302
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. N Male to SMA Male Right Angle Cable Using LMR-240 Coax. PE3W16302 is a N male to SMA male right angle cable using LMR-240 coax. This Pasternack N male to SMA male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. N to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16302 N male to SMA male right angle cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE71S6302
D#: PE71S6302
|
Pasternack Enterprises
|
Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: SP4T, Minimum Frequency: DC, Maximum Frequency: 22 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 20 Watts, Maximum VSWR: 1.6:1, Maximum Insertion Loss: 0.6 dB, Minimum Isolation: 60 dB. SP4T Electromechanical Relay Normally Open Switch, Terminated, DC to 22 GHz, 20W, 28V, Indicators, SMA. PE71S6302 electromechanical RF relay switch from Pasternack is a SP4T design. Our SP4T electromechanical RF switch uses SMA connectors at 50 Ohm. This SMA RF relay SP4T switch has a maximum frequency of 22 GHz and maximum power of 20 Watts. The Pasternack radio frequency SP4T SMA electro-mechanical relay switch is rated at a control voltage of 28 Volts, indicator voltage and switching speed of 15ms. SMA SP4T electro mechanical RF relay switch features Indicators with an isolation minimum of 60 dB. SP4T electromechanical relay radio frequency switch PE71S6302 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SP4T SMA coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
16
|
- 1 $2,220.0000
- 5 $2,131.2000
- 10 $2,042.4000
|
Buy Now
|
Microchip Technology Inc 
Rochester Electronics 
Microchip USA 
Master Electronics 
Flip Electronics 
Direct Components, Inc. 
ComSIT USA 
Bristol Electronics 
Global Solutions Electronics Company 
Interstate Connecting Components 
DB Roberts 
CDM Electronics 
Velocity Electronics 
IC-Online 
Powell Electronics 
Quotebeam 
NAC 
Weyland Group Limited 
Dynamic Solutions GmbH 
Techni-Tool, Inc. 
TestEquity LLC 
Sensible Micro Corporation 
Karmiel Tech 
PEI Genesis 
Richardson RFPD 
Quest Components 
Sager 
Gallop Great Holdings (Hong Kong) Limited 
Fairview Microwave 
Inventory Management Partners 
Jameco Electronics 
Ersa Electronics 
Futuretech Components Ltd 
Shengyu Electronics Technology Limited 
J2 Sourcing 
IC Components Limited 
South Electronics 
MountainView Components Inc. 
New Advantage Corporation 
GlobalTek Components 
HK DCY Technology Limited 
Shenzhen Zhongkaixin Micro Electronics Co., Ltd. 
Briocean Technology Co.,Ltd. 
R&J Components 
ICSOSO Electronics 
HS IC Trading GmbH 
NexGen Digital
Sense Electronic Company Limited 
E-RIZE CO., LTD 
Rutronik 
North Star Micro Electronics 
Metaverse IC Inc. 
Suntronic Electronics Co 
YIC International Co., Limited 
Opulent Electronics Inc. 
LIBRA Elektronik GmbH 
Spring Technology Co.,Ltd. 
DGT Technology (HK) Co., Limited 
Pasternack Enterprises US 
Wenorca Kash 
LIXINC Electronics Co Limited 
Silitech Components Inc. 
Neutron USA 
Unibetter Technology Co., Ltd 
Hong Kong Hongxinwei Technology Co., Ltd. 
AMH Components Ltd 
Perfect Parts Corporation 
Unicom Electronics 
Semtke Electronic Company Limited 
Win Source Electronics 
New Strength Electronic Co., Limited 
Heisener Electronics 
Cytech Systems Limited 
OMO Electronic Limited 
Ample Chip Limited 
Chip Digger Limited 
CXDA Electronics 
Vyrian 
ACDS 
UK Serfala 
Tedss 
Sierra IC 
Quarktwin Technology 
Venkel Ltd. 
RX Electronics Limited