|
PE51740
D#: PE51740
|
Pasternack Enterprises
|
Key Specifications, Polarity: Standard, Connector Series: SMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 18 GHz, Interface Type 1: .137 inch End Launch. SMA Female Commercial Grade Connector Solder Attachment .137 inch End Launch PCB, .020 Inches Diameter Pin. PE51740 SMA female PCB connector has an interface type of SMA female which is compatible with .137 inch end launch cables and has an impedance of 50 Ohms. Pasternack's SMA female connector uses solder as an attachment method. Our female SMA PCB connector provides a maximum frequency of 18 GHz. Our high-quality radio frequency co-axial connector is used for general purpose test and printed circuit board applications. This SMA female RF connector is stocked to be readily available for same business day shipment and can be expertly assembled using our online Cable Creator. The Pasternack SMA female PCB connector has a PTFE dielectric type and a VSWR of 1.2:1. Pasternack's SMA PCB connector has a brass body with gold plating. Our PE51740 SMA connector uses a beryllium copper inner contact and a brass outer contact.The Pasternack commercial grade RF connector block has a maximum inner conductor and outer conductor resistance of 6 mOhms and 2.5 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. The PE51740 SMA commercial grade connector operates at a temperature range of -55 to 125 deg C. This female SMA PCB RF connector has a maximum insertion loss of 0.3 dB. This SMA connector has a gold inner contact plating and a nickel outer contact plating. The Pasternack commercial grade SMA female connector has a dielectric withstanding voltage of 1,000 Vrms. This PCB RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our SMA female connector has a length of 0.52 inches, a width of 0.32 inches, and a weight of 0.09 lbs. This Pasternack commercial grade female SMA connector will ship the same business day as purchased. Our SMA female connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.
Min Qty:
1
Package Multiple:
1
|
20
|
- 1 $13.9900
- 25 $13.2900
- 50 $12.5900
- 100 $12.0300
- Show All
|
Buy Now
|
|
PE7403-8
D#: PE7403-8
|
Pasternack Enterprises
|
Key Specifications, Design: Fixed, Maximum Frequency: 65 GHz, Impedance: 50 Ohm, Power Maximum: 1 Watt, VSWR Maximum: 1.65:1, Attenuation: 8 dB, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Series 2: 1.85mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 8 dB Fixed Attenuator, 1.85mm Male to 1.85mm Female Passivated Stainless Steel Body Rated to 1 Watt Up to 65 GHz. PE7403-8 is a fixed 8 dB attenuator from Pasternack. This 8dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 1.85mm attenuator has a male gender on side 1 and a 1.85mm female connector on side 2. The Pasternack PE7403-8 8 dB attenuator is rated for up to 65 GHz. Our microwave attenuator is rated to 1 Watts at the stated attenuation value. Our fixed RF attenuator PE7403-8 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 8dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
Min Qty:
1
Package Multiple:
1
|
11
|
- 1 $1,050.0000
- 5 $1,008.0000
- 10 $966.0000
- 25 $924.0000
- Show All
|
Buy Now
|
|
PE7403-2
D#: PE7403-2
|
Pasternack Enterprises
|
Key Specifications, Design: Fixed, Maximum Frequency: 65 GHz, Impedance: 50 Ohm, Power Maximum: 1 Watt, VSWR Maximum: 1.65:1, Attenuation: 2 dB, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Series 2: 1.85mm, Connector Gender 2: Female, Body Material: Passivated Stainless Steel. 2 dB Fixed Attenuator, 1.85mm Male to 1.85mm Female Passivated Stainless Steel Body Rated to 1 Watt Up to 65 GHz. PE7403-2 is a fixed 2 dB attenuator from Pasternack. This 2dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 1.85mm attenuator has a male gender on side 1 and a 1.85mm female connector on side 2. The Pasternack PE7403-2 2 dB attenuator is rated for up to 65 GHz. Our microwave attenuator is rated to 1 Watts at the stated attenuation value. Our fixed RF attenuator PE7403-2 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 2dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $347.9900
- 5 $334.0700
- 10 $320.1500
- 25 $306.2300
- Show All
|
Buy Now
|
|
PE3C7406
D#: PE3C7406
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C9740-24
D#: PE3C9740-24
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P086HF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Mini SMP Female to 2.4mm Male VITA 67 Cable 24 Inch Length Using PE-P086HF Coax with HeatShrink., Radio frequency assembly mini SMP female to 2.4mm male VITA 67 cable 24 inch length using PE-P086HF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female to 2.4mm male VITA 67 cable 24 inch length using PE-P086HF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax vita 67 cable assembly is built with mini SMP cable connection on one end and 2.4mm cable connection on the other. Our vita 67 mini SMP to 2.4mm cable assemblies have a female gender on end 1 and male on end 2. PE3C9740-24 can also be known as a vita 67 mini SMP jack to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to 2.4mm plug cable assembly PE3C9740-24 is built with which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with mini SMP to 2.4mm cable connectors, has a 50 Ohm impedance. RF specs on this 40 GHz maximum frequency mini SMP female to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9740-24 can also be used in the other direction and will be 2.4mm male to mini SMP female cable assembly if the opposite connectivity is required. Vita 67 mini SMP jack to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.4mm cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female to 2.4mm male VITA 67 cable 24 inch length using PE-P086HF coax with heatshrink.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $349.9900
- 25 $332.4900
- 50 $314.9900
- 100 $300.9900
- Show All
|
Buy Now
|
|
PE3C2740/HS
D#: PE3C2740/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. N Female Bulkhead to SMA Male Cable Using LMR-200 Coax with HeatShrink. PE3C2740/HS is a N female bulkhead to SMA male cable using LMR-200 coax. This Pasternack N female bulkhead to SMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SMA for connector 2. Our female N bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2740/HS N female bulkhead to SMA male cable assembly is constructed with LMR-200 coax, * LMRâ„¢ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C2740LF/HS
D#: PE3C2740LF/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. SMA Male to N Female Bulkhead Cable Using LMR-200 Coax with HeatShrink, LF Solder. PE3C2740LF/HS is a SMA male to N female bulkhead cable using LMR-200 coax. This Pasternack SMA male to N female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2740LF/HS SMA male to N female bulkhead cable assembly is constructed with LMR-200 coax, * LMRâ„¢ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W17401
D#: PE3W17401
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to N Male Cable Using LMR-100 Coax. PE3W17401 is a SMA female bulkhead to N male cable using LMR-100A coax. This Pasternack SMA female bulkhead to N male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our female SMA bulkhead to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17401 SMA female bulkhead to N male cable assembly is constructed with LMR-100A coax, * LMRâ„¢ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W17407LF
D#: PE3W17407LF
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401FL, RF Cable Type: PE-SR401FL, RF Cable Impedance: 50 Ohm. SMA Male to N Female 4 Hole Flange Cable Using PE-SR401FL Coax, LF Solder. PE3W17407LF is a SMA male to N female 4 hole flange cable using PE-SR401FL coax. This Pasternack SMA male to N female 4 hole flange cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. Our male SMA to female N 4 hole flange cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W17407LF SMA male to N female 4 hole flange cable assembly is constructed with PE-SR401FL coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C7400
D#: PE3C7400
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: 1.85mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
RECOM Power 
TE Connectivity 
SiTime Corporation 
Rochester Electronics 
Master Electronics 
Coilcraft Direct 
Flip Electronics 
North Star Micro Electronics 
Axis Part Limited 
C Plus Electronics 
Velocity Electronics 
Chip-Germany GmbH 
TestEquity LLC 
Commodity Components Intl 
Time Way Electronics Limited 
Quest Components 
DB Roberts 
Bristol Electronics 
Component Stockers 
West Coast Components Inc. 
ComSIT USA 
Component Search 
Allelco Limited 
Richardson RFPD 
Dynamic Solutions GmbH 
CDM Electronics 
Sager 
Interstate Connecting Components 
NAC 
L-com US 
Kurrent Technology 
ChipNobo Co., Limited 
Bisco Industries 
ICMILES Electronics Ltd 
Powell Electronics 
ICProFast Technology 
Kepictronics Inc. 
ANDE Electronics 
Blume Elektronik Distribution GmbH 
PUI 
PEI Genesis 
Techni-Tool, Inc. 
Tencell 
Teledyne e2v 
Microchip USA 
Ameya Holding Limited 
Sensible Micro Corporation 
Perfect Parts Corporation 
Utmel Electronic 
MountainView Components Inc. 
Rutronik 
Sierra IC 
Greenchips 
R&J Components 
Win Source Electronics 
Cytech Systems Limited 
Opulent Electronics Inc. 
YIC International Co., Limited 
EBV Elektronik 
Karl Kruse GmbH & Co KG 
NexGen Digital
Futuretech Components Ltd 
JRH Electronics 
ACDS 
Avnet Silica 
Pasternack Enterprises US 
Avnet Abacus 
AMH Components Ltd 
Vyrian 
Tedss 
J2 Sourcing 
Venkel Ltd. 
Shengyu Electronics Technology Limited 
Neutron USA 
LCSC 
RG Elektrotechnologie GmbH 
Chip Stock 
IC Components Limited 
Chips Pulse Industry Limited 
New Advantage Corporation 
CXDA Electronics 
Unicom Electronics 
ES Components 
ICHOT TECHNOLOGY LIMITED 
Metaverse IC Inc. 
Silitech Components Inc. 
Sense Electronic Company Limited 
New Strength Electronic Co., Limited 
LIBRA Elektronik GmbH