|
PE3C6378-150CM
D#: PE3C6378-150CM
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-375, RF Cable Type: SPO-375, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. Outdoor Rated N Female to N Female Low PIM Cable 150 cm Length Using SPO-375 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated N female to N female low PIM cable 150 cm length using SPO-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated N female to N female low PIM cable 150 cm length using SPO-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP375-NF-LP type N to TC-SPP375-NF-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP375-NF-LP type N cable connection on one end and TC-SPP375-NF-LP type N cable connection on the other. Our low PIM TC-SPP375-NF-LP N type to TC-SPP375-NF-LP type N cable assemblies have a female gender on end 1 and female on end 2. This TC-SPP375-NF-LP type N to TC-SPP375-NF-LP type N cable is a female to female coax assembly, PE3C6378-150CM, can also be known as a low PIM TC-SPP375-NF-LP N type jack to TC-SPP375-NF-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-SPP375-NF-LP type N jack to TC-SPP375-NF-LP N type jack cable assembly PE3C6378-150CM is built with SPO-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP375-NF-LP N cable assembly is manufactured with TC-SPP375-NF-LP N type to TC-SPP375-NF-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM TC-SPP375-NF-LP type N female to TC-SPP375-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP375-NF-LP N type jack to TC-SPP375-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP375-NF-LP type N to TC-SPP375-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP375-NF-LP type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated N female to N female low PIM cable 150 cm length using SPO-375 coax using Times Microwave parts.
Min Qty:
1
Package Multiple:
1
|
50
|
- 1 $179.9900
- 25 $170.9900
- 50 $161.9900
- 100 $154.7900
- Show All
|
Buy Now
|
|
PE3C100078-150CM
D#: PE3C100078-150CM
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-TC177A, RF Cable Type: PE-TC177A, RF Cable Impedance: 50 Ohm, Length, Max: 59.0551 inches. 2.4mm Female to 2.4mm Male Low Loss Test Cable 150 CM Length Using PE-TC177A Coax., Pasternack’s PE3C100078-150CM low loss test 2.4mm female to 2.4mm male RF cable assembly using PE-TC177A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm female to 2.4mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax low loss test cable assembly is built with a 2.4mm cable connection on one end and a 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100078-150CM can also be known as a low loss test 2.4mm jack to 2.4mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PTFE dielectric type. The 2.4mm to 2.4mm low loss test cable from Pasternack is ideal for applications including VNA test port extenders, semiconductor probe testing, precise bench-top testing and lab and production testing. This cable assembly employs durable and flexible materials, and with a 0.98-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100078-150CM RF cable has a ruggedized aramid yarn jacket of 0.177-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 100 degrees C. This cable assembly has a typical propagation velocity of 77%. Our 2.4mm female to 2.4mm male cable has a maximum VSWR of 1.45:1. This PE3C100078-150CM 2.4mm jack to 2.4mm plug cable assembly is built with PE-TC177A, which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this 59.06-inch-long low loss test RF cable are available on our downloadable PDF datasheet. PE3C100078-150CM can also be used in the other direction and will be a 2.4mm plug to 2.4mm jack cable assembly if the opposite connectivity is required. This low loss test 2.4mm jack to 2.4mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.4mm to 2.4mm low loss test RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
19
|
- 1 $1,102.0300
- 5 $1,057.9500
- 10 $1,013.8700
- 25 $969.7900
- Show All
|
Buy Now
|
|
PE3C8278-150CM
D#: PE3C8278-150CM
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. 4.1/9.5 Mini DIN Male to 4.3-10 Female Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly 4.1/9.5 mini DIN male to 4.3-10 female low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.1/9.5 mini DIN male to 4.3-10 female low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 4.3-10 cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to 4.3-10 cable is a male to female coax assembly, PE3C8278-150CM, can also be known as a low PIM 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly PE3C8278-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to 4.3-10 female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8278-150CM can also be used in the other direction and will be 4.3-10 female to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to 4.3-10 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.1/9.5 mini DIN male to 4.3-10 female low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components.
Min Qty:
1
Package Multiple:
1
|
11
|
- 1 $96.9900
- 25 $92.1400
- 50 $87.2900
- 100 $83.4100
- Show All
|
Buy Now
|
|
PE3W15978-150CM
D#: PE3W15978-150CM
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-500-LLPL, RF Cable Type: SPP-500-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 59.0551 inches. Plenum 7/16 DIN Male to 7/16 DIN Male Low PIM Cable 150 CM Length Using SPP-500-LLPL Coax., Radio frequency assembly plenum 7/16 DIN male to 7/16 DIN male low PIM cable 150 cm length using SPP-500-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum 7/16 DIN male to 7/16 DIN male low PIM cable 150 cm length using SPP-500-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a 7/16 DIN cable connection on the other. Our low PIM 7/16 DIN to 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W15978-150CM can also be known as a low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1.5 inches, allowing for a single bend without damaging the cable. Our PE3W15978-150CM RF cable has a FEP jacket of 0.500-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has an in-series connection. Our 7/16 DIN male to 7/16 DIN male cable has a maximum VSWR of 1.5:1. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3W15978-150CM is built with SPP-500-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN low PIM RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
2
|
- 1 $373.9900
- 10 $359.0300
- 25 $344.0700
- 100 $329.1100
- Show All
|
Buy Now
|
|
PE37815
D#: PE37815
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: C, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: C, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. C Male to C Male Right Angle Cable Using RG225 Coax., Radio frequency assembly C male to C male right angle cable using RG225 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The C male to C male right angle cable using RG225 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type C to type C cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with C type cable connection on one end and right angle type C cable connection on the other. Our C type to right angle type C cable assembly has male gender on end 1 and male on end 2. PE37815 can also be known as a type C plug to right angle type C plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. C type plug to C type plug cable assembly PE37815 is built with RG225 which is a flexible coax type. The Pasternack flexible C cable assembly is manufactured with type C to right angle type C cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37815 RF cable are available on our downloadable PDF datasheet.PE37815 can also be used in the other direction and will be right angle type C male to C type male cable assembly if the opposite connectivity is required. Type C plug to C type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type C to C type cable assembly for quick shipment worldwide. Variations of type C cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal C RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE37815-36
D#: PE37815-36
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: C, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: C, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. C Male to C Male Right Angle Cable 36 Inch Length Using RG225 Coax., Radio frequency assembly C male to C male right angle cable 36 inch length using RG225 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The C male to C male right angle cable 36 inch length using RG225 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type C to type C cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with C type cable connection on one end and right angle type C cable connection on the other. Our C type to right angle type C cable assembly has male gender on end 1 and male on end 2. PE37815-36 can also be known as a type C plug to right angle C type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. Type C plug to type C plug cable assembly PE37815-36 is built with RG225 which is a flexible coax type. The Pasternack flexible C cable assembly is manufactured with C type to right angle type C cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37815-36 RF cable are available on our downloadable PDF datasheet.PE37815-36 can also be used in the other direction and will be right angle C type male to type C male cable assembly if the opposite connectivity is required. Type C plug to type C right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality C type to type C cable assembly for quick shipment worldwide. Variations of type C cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal C RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $341.9900
- 25 $324.8900
- 50 $307.7900
- 100 $294.1100
- Show All
|
Buy Now
|
|
PE37815-72
D#: PE37815-72
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: C, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: C, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. C Male to C Male Right Angle Cable 72 Inch Length Using RG225 Coax., Radio frequency assembly C male to C male right angle cable 72 inch length using RG225 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The C male to C male right angle cable 72 inch length using RG225 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type C to type C cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with C type cable connection on one end and right angle C type cable connection on the other. Our type C to right angle type C cable assembly has male gender on end 1 and male on end 2. PE37815-72 can also be known as a type C plug to right angle C type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. Type C plug to type C plug cable assembly PE37815-72 is built with RG225 which is a flexible coax type. The Pasternack flexible C cable assembly is manufactured with C type to right angle type C cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37815-72 RF cable are available on our downloadable PDF datasheet.PE37815-72 can also be used in the other direction and will be right angle C type male to C type male cable assembly if the opposite connectivity is required. Type C plug to type C right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality C type to type C cable assembly for quick shipment worldwide. Variations of type C cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal C RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $515.0000
- 25 $489.2500
- 50 $463.5000
- 100 $442.9000
- Show All
|
Buy Now
|
|
PE3FCA278-15M
D#: PE3FCA278-15M
|
Pasternack Enterprises
|
Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber LC UPC to ST UPC, OM4 Multimode Distribution Cable, 5.0mm Riser, 2.0mm breakout, Aqua-15M. Pasternack’s PE3FCA278-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 6-fiber cable assembly is equipped with LC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 6-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA278-15M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $175.9900
- 5 $168.9500
- 10 $161.9100
- 25 $154.8700
- Show All
|
Buy Now
|
|
PE3C7815
D#: PE3C7815
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE37815-48
D#: PE37815-48
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: C, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: C, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. C Male to C Male Right Angle Cable 48 Inch Length Using RG225 Coax., Radio frequency assembly C male to C male right angle cable 48 inch length using RG225 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The C male to C male right angle cable 48 inch length using RG225 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type C to C type cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with type C cable connection on one end and right angle type C cable connection on the other. Our C type to right angle type C cable assembly has male gender on end 1 and male on end 2. PE37815-48 can also be known as a C type plug to right angle type C plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PTFE dielectric type. Type C plug to C type plug cable assembly PE37815-48 is built with RG225 which is a flexible coax type. The Pasternack flexible C cable assembly is manufactured with type C to right angle type C cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37815-48 RF cable are available on our downloadable PDF datasheet.PE37815-48 can also be used in the other direction and will be right angle type C male to C type male cable assembly if the opposite connectivity is required. Type C plug to C type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type C to C type cable assembly for quick shipment worldwide. Variations of type C cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal C RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $399.9900
- 25 $379.9900
- 50 $359.9900
- 100 $343.9900
- Show All
|
Buy Now
|
Microchip Technology Inc 
TE Connectivity 
Rochester Electronics 
Coilcraft Direct 
Flip Electronics 
NAC 
Time Way Electronics Limited 
Allelco Limited 
Microchip USA 
ICHOME Technology 
Component Stockers 
Kepictronics Inc. 
IBS Electronics 
Unikey Electronic Pte Ltd 
Dynamic Solutions GmbH 
Chip-Germany GmbH 
Bisco Industries 
Sager 
DB Roberts 
Tencell 
Powell Electronics 
Bristol Electronics 
ComSIT USA 
Axis Part Limited 
North Star Micro Electronics 
ICMILES Electronics Ltd 
Waytek, Inc. 
Ameya Holding Limited 
PEI Genesis 
Interstate Connecting Components 
Richardson RFPD 
Hermes Engineering 
C Plus Electronics 
PUI 
Neutron USA 
LCSC 
New Advantage Corporation 
Shengyu Electronics Technology Limited 
Sense Electronic Company Limited 
Unibetter Technology Co., Ltd 
IC Components Limited 
Sierra IC 
Rutronik 
LIBRA Elektronik GmbH 
Win Source Electronics 
Avnet Abacus 
Avnet Silica 
Tedss 
New Strength Electronic Co., Limited 
NexGen Digital
Vyrian 
MountainView Components Inc. 
Greenchips 
Chip Stock 
EBV Elektronik 
Perfect Parts Corporation 
YIC International Co., Limited 
Cytech Systems Limited 
Futuretech Components Ltd 
Pasternack Enterprises US 
R&J Components 
ACDS 
Silitech Components Inc. 
GlobalTek Components 
Unicom Electronics