|
PE3W01842-120
D#: PE3W01842-120
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male to N Male Right Angle Low Loss Cable 120 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male to N male right angle low loss cable 120 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 120 inch length using LMR-400-UF coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle N type cable connection on the other. Our low loss type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W01842-120 can also be known as a low loss N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3W01842-120 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01842-120 can also be used in the other direction and will be right angle N type male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 120 inch length using LMR-400-UF coax.
Min Qty:
1
Package Multiple:
1
|
426
|
- 1 $201.9900
- 25 $191.8900
- 50 $181.7900
- 100 $173.7100
- Show All
|
Buy Now
|
|
PE3C8421
D#: PE3C8421
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum N Male to N Female Bulkhead Low PIM Cable Using SPP-250-LLPL Coax., Radio frequency assembly plenum N male to N female bulkhead low PIM cable using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum N male to N female bulkhead low PIM cable using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8421 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3C8421 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8421 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8421 can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
300
|
|
Buy Now
|
|
PE3C8421-12
D#: PE3C8421-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Plenum N Male to N Female Bulkhead Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum N male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum N male to N female bulkhead low PIM cable 12 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8421-12 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3C8421-12 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8421-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8421-12 can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
60
|
- 1 $72.7900
- 25 $69.1500
- 50 $65.5100
- 100 $62.6000
- Show All
|
Buy Now
|
|
PE3C8421-36
D#: PE3C8421-36
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Plenum N Male to N Female Bulkhead Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum N male to N female bulkhead low PIM cable 36 inch length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum N male to N female bulkhead low PIM cable 36 inch length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8421-36 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3C8421-36 RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8421-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8421-36 can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
60
|
- 1 $93.0900
- 25 $88.4400
- 50 $83.7800
- 100 $80.0600
- Show All
|
Buy Now
|
|
PE3C8421-50CM
D#: PE3C8421-50CM
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 19.685 inches. Plenum N Male to N Female Bulkhead Low PIM Cable 50 CM Length Using SPP-250-LLPL Coax., Radio frequency assembly plenum N male to N female bulkhead low PIM cable 50 cm length using SPP-250-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum N male to N female bulkhead low PIM cable 50 cm length using SPP-250-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N bulkhead cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C8421-50CM can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3C8421-50CM RF cable has a FEP jacket of 0.280-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 155 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Our type N male to bulkhead type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C8421-50CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C8421-50CM can also be used in the other direction and will be a type N female bulkhead to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
60
|
- 1 $79.1900
- 25 $75.2300
- 50 $71.2700
- 100 $68.1000
- Show All
|
Buy Now
|
|
PE3W17842-18
D#: PE3W17842-18
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: 2.92mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 2.92mm Male to N Female Bulkhead Cable 18 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly 2.92mm male to N female bulkhead cable 18 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.92mm male to N female bulkhead cable 18 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 2.92mm to type N cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 2.92mm cable connection on one end and a type N bulkhead cable connection on the other. Our a 2.92mm to a type N cable assembly has male gender on end 1 and female on end 2. PE3W17842-18 can also be known as a 2.92mm plug to type N jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.575-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17842-18 RF cable has a FEP jacket of 0.161-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 100 dB. 2.92mm plug to type N jack cable assembly PE3W17842-18 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable 2.92mm cable assembly is manufactured with 2.92mm to type N cable connectors and has a 50 Ohm impedance. One connector features the solder attachment method and a stainless steel body with gold over nickel plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W17842-18 can also be used in the other direction and will be type N female bulkhead to 2.92mm male cable assembly if the opposite connectivity is required. 2.92mm plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 2.92mm to type N cable assembly for quick shipment worldwide. Variations of 2.92mm and type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 2.92mm to type N RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
21
|
- 1 $196.9900
- 25 $187.1400
- 50 $177.2900
- 100 $169.4100
- Show All
|
Buy Now
|
|
PE8421
D#: PE8421
|
Pasternack Enterprises
|
Key Specifications, Connector In Series: N, Connector In Gender: Female, Connector Out Series: N, Minimum Frequency: 698 MHz, Maximum Frequency: 960 MHz, Impedance: 50 Ohm, Maximum Insertion Loss: 0.35 dB, Maximum Input Power: 1,000 Watts, Minimum Isolation: 18 dB. High Power Isolator With 18 dB Isolation From 698 MHz to 960 MHz, 1000 Watts And N Female. Pasternack RF isolator PE8421 is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This RF isolator is manufactured with type N connectors that are female. Our type N isolator has a minimum frequency of 698 MHz and a maximum frequency of 960 MHz. This type N coaxial isolator has a minimum isolation of 18 dB and a maximum input power of 1000 Watts. PE8421 coaxial type N isolator is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our radio frequency isolator can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $797.9900
- 10 $766.0700
- 25 $734.1500
|
Buy Now
|
|
PE3W08421LF
D#: PE3W08421LF
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C5842-150CM
D#: PE3C5842-150CM
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 59.0551 inches. Plenum 4.1/9.5 Mini DIN Female to 7/16 DIN Male Low PIM Cable 150 cm Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN female to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN female to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and 7/16 DIN cable connection on the other. Our low PIM 4.1/9.5 mini DIN to 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This 4.1/9.5 mini DIN to 7/16 DIN cable is a female to male coax assembly, PE3C5842-150CM, can also be known as a low PIM 4.1/9.5 mini DIN jack to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN jack to 7/16 DIN plug cable assembly PE3C5842-150CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN female to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5842-150CM can also be used in the other direction and will be 7/16 DIN male to 4.1/9.5 mini DIN female cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN jack to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN female to 7/16 DIN male low PIM cable 150 cm length using SPP-250-LLPL coax, LF solder.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $222.9900
- 25 $211.8400
- 50 $200.6900
|
Buy Now
|
|
PE39842-12
D#: PE39842-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male Right Angle to BNC Female Cable 12 Inch Length Using RG316-DS Coax., Radio frequency assembly BNC male right angle to BNC female cable 12 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to BNC female cable 12 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and BNC cable connection on the other. Our right angle BNC to BNC cable assembly has male gender on end 1 and female on end 2. PE39842-12 can also be known as a right angle BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. BNC plug to BNC jack cable assembly PE39842-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE39842-12 RF cable are available on our downloadable PDF datasheet.PE39842-12 can also be used in the other direction and will be BNC female to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $104.9900
- 25 $99.7400
- 50 $94.4900
- 100 $90.2900
- Show All
|
Buy Now
|
Microchip Technology Inc 
Rochester Electronics 
SiTime Corporation 
TE Connectivity 
Sager 
Master Electronics 
Flip Electronics 
R&J Components 
Dynamic Solutions GmbH 
North Star Micro Electronics 
Sensible Micro Corporation 
Kepictronics Inc. 
Powell Electronics 
Hermes Engineering 
Richardson RFPD 
NAC 
Bristol Electronics 
PEI Genesis 
ComSIT USA 
Quest Components 
Unikey Electronic Pte Ltd 
Component Stockers 
PB Signal 
Interstate Connecting Components 
ICHOME Technology 
DB Roberts 
Waytek, Inc. 
Time Way Electronics Limited 
DST International Group (HK) Limited 
PUI 
Microchip USA 
ICMILES Electronics Ltd 
Chipskey Technology Co Ltd 
Pasternack Enterprises US 
Perfect Parts Corporation 
Shengyu Electronics Technology Limited 
Futuretech Components Ltd 
Neutron USA 
Unicom Electronics 
Vyrian 
Sierra IC 
YIC International Co., Limited 
Win Source Electronics 
New Advantage Corporation
LCSC 
Silitech Components Inc. 
Tedss 
IC Components Limited 
Chip Stock 
ICHOT TECHNOLOGY LIMITED 
GlobalTek Components 
MountainView Components Inc. 
LIBRA Elektronik GmbH 
Rutronik 
Sense Electronic Company Limited 
Greenchips 
Cytech Systems Limited