|
PE3902-24
D#: PE3902-24
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMC Plug to SMC Plug Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly SMC plug to SMC plug cable 24 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMC plug to SMC plug cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMC to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMC cable connection on one end and SMC cable connection on the other. Our SMC to SMC cable assemblies have a plug gender on end 1 and plug on end 2. This SMC to SMC cable is a plug to plug coax assembly, PE3902-24, can also be known as a SMC male to SMC male cable assembly and will be shipped same-day as it is purchased. SMC male to SMC male cable assembly PE3902-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to SMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMC plug to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMC male to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMC plug to SMC plug cable 24 inch length using RG178 coax.
Min Qty:
1
Package Multiple:
1
|
190
|
- 1 $85.9900
- 25 $81.6900
- 50 $77.3900
- 100 $73.9500
- Show All
|
Buy Now
|
|
PE3W00902-24
D#: PE3W00902-24
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to TNC Male Low Loss Cable 24 Inch Length Using LMR-400 Coax., Radio frequency assembly SMA male to TNC male low loss cable 24 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 24 inch length using LMR-400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00902-24 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W00902-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00902-24 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male low loss cable 24 inch length using LMR-400 coax.
Min Qty:
1
Package Multiple:
1
|
181
|
- 1 $109.9900
- 25 $104.4900
- 50 $98.9900
- 100 $94.5900
- Show All
|
Buy Now
|
|
PE3C4902-24
D#: PE3C4902-24
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. Slide-On BMA Jack Right Angle 2 Hole Flange to Slide-On BMA Jack Right Angle 2 Hole Flange Cable 24 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly slide-on BMA jack right angle 2 hole flange to slide-on BMA jack right angle 2 hole flange cable 24 inch length using PE-SR402FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack right angle 2 hole flange to slide-on BMA jack right angle 2 hole flange cable 24 inch length using PE-SR402FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BMA 2 hole flange cable connection on one end and right angle BMA 2 hole flange cable connection on the other. Our right angle BMA to right angle BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4902-24, can also be known as a right angle BMA female to right angle BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4902-24 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with right angle BMA to right angle BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency BMA right angle jack 2 hole flange to BMA right angle jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA right angle female 2 hole flange to BMA right angle female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack right angle 2 hole flange to slide-on BMA jack right angle 2 hole flange cable 24 inch length using PE-SR402FLJ coax.
Min Qty:
1
Package Multiple:
1
|
3
|
- 1 $195.9900
- 25 $186.1900
- 50 $176.3900
|
Buy Now
|
|
PE70A9022
D#: PE70A9022
|
Pasternack Enterprises
|
Key Specifications.Type of EqualizerNegative SlopeFrequency Range2 GHz to 6 GHzSmall Signal Insertion Loss0.8 dBEqualizing Value6 dBVSWR1.8 : 1Impedence (IN/OUT)50 OhmsRF Input Power, Max24 dBmLinearity+/-0.5Input/Output ConnectorSMA Female (Field Replaceable)Length0.59in 14.99mmWidth0.63in 16mmHeight0.39in 9.91mmWeight0.03lbsTemperature (Operating Range)-55 to +95 deg CTemperature (Storage Range)-65 to +125 deg C. Negative Slope Equalizer, 2 GHz to 6 GHz, 6 dB Fixed Equalizing Value, 0.8 dB Loss, Max Pin 150 mW, SMA. The PE70A9022 is a Negative Slope Equalizer module that covers a frequency range from 2 GHz to 6 GHz and exhibits a fixed attenuation response that decreases linearly with frequency. The 50 Ohm design has an equalizing value of 6 dB typical at 6 GHz. Negative slope equalizers are particularly useful in compensating the gain slope in systems where large amounts of cabling may cause exessive loss at higher frequencies over the operating band. Impressive typical performance includes low insertion loss of 0.8 dB, 1.8:1 VSWR, +/- 0.5 dB linearity, and maximum RF input power handling of +24 dBm. The rugged and compact package design supports field replaceable SMA female connectors, operates across a wide temperature range of -55°C to +95°C, and meets MIL-E-5400 and MIL-E-16400 environmental requirements.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $1,200.0000
- 5 $1,152.0000
- 10 $1,104.0000
- 25 $1,056.0000
- Show All
|
Buy Now
|
|
PE71S9022
D#: PE71S9022
|
Pasternack Enterprises
|
Key Specifications, Connector Series: 2.4mm, Connector Gender: Female, Switch Design: SPDT, Minimum Frequency: DC, Maximum Frequency: 50 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 80 Watts, Maximum VSWR: 1.9:1, Maximum Insertion Loss: 1.1 dB, Minimum Isolation: 50 dB. SPDT Electromechanical Relay Latching Switch, Terminated, DC to 50 GHz, Up to 80W, 28V, 2M Lifecycles, Solder Terminal, 2.4mm. The PE71S9022 electromechanical RF relay switch from Pasternack is available in a single pole double throw switch design with a latching actuator. This RF relay SPDT switch in a 2.4mm female connector has a maximum frequency of 50 GHz. Our 2.4mm SPDT electromechanical relay switch is rated for an input power handling of 80 Watts maximum (CW) at 50 GHz and make before break. The maximum switching speed of this radio frequency SPDT electromechanical switch is 10 ms. We offer a 50-ohm impedance coax connectorized SPDT terminated electromechanical relay RF switch. Our 2.4mm female electromechanical relay switch features a splashproof design. This electromechanical relay SPDT RF switch has a make before break action. Pasternack’s PE71S9022 2.4mm relay switch comes with a maximum VSWR of 1.9:1 and a maximum insertion loss of 1.1 dB. This electromechanical RF relay switch is available in 1.92-inch length, 0.56-inch height and 2.19-inch width. The RF relay switch with a solder pin control connector type has a typical operating voltage of 28 Volts. This SPDT switch is suitable for aerospace & defense, test & measurement, microwave radio systems, military commercial communication systems, research & development, SATCOM, wireless communications, enterprise and IoT applications. Our PE71S9022 2.4mm RF switch has a typical actuating set current of 160 mA. Our radio frequency electromechanical relay switch from Pasternack can operate at temperatures ranging from -25 to 70 deg C. This latching RF switch with a 2.4mm female connector has a minimum isolation of 50 dB. Additional dimensions and specifications for this electromechanical relay switch are on our downloadable PDF datasheet above. The SPDT electromechanical relay radio frequency latching switch PE71S9022 is part of over 40,000 RF, microwave, and millimeter wave components available from Pasternack. Our 2.4mm RF electromechanical relay switch can ship worldwide the same business day that it is bought, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF latching switches for your requirements.
Min Qty:
1
Package Multiple:
1
|
1
|
- 1 $7,610.0000
- 10 $7,305.6000
- 25 $7,001.2000
- 100 $6,696.8000
- Show All
|
Buy Now
|
|
PE3W19022
D#: PE3W19022
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. SMB Plug Right Angle to BNC Female Cable Using LMR-100A-UF Coax. PE3W19022 is a SMB plug right angle to BNC female cable using LMR-100A-UF coax. This Pasternack SMB plug right angle to BNC female cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm BNC for connector 2. SMB right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19022 SMB plug right angle to BNC female cable assembly is constructed with LMR-100A-UF coax, * LMRâ„¢ is a trademark of Times Microwave Systems.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W09022
D#: PE3W09022
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Female Cable Using PE-SR405FLJ Coax. PE3W09022 is a TNC male right angle to TNC female cable using PE-SR405FLJ coax. This Pasternack TNC male right angle to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female TNC cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W09022 TNC male right angle to TNC female cable assembly is constructed with PE-SR405FLJ coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3C9022
D#: PE3C9022
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. TNC Male Right Angle to TNC Female Cable Using PE-SR402AL Coax. PE3C9022 is a TNC male right angle to TNC female cable using PE-SR402AL coax. This Pasternack TNC male right angle to TNC female cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm TNC for connector 2. TNC right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male TNC right angle to female TNC cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C9022 TNC male right angle to TNC female cable assembly is constructed with PE-SR402AL coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE39022LF/HS
D#: PE39022LF/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm. Bordeaux FAKRA Jack to N Male Cable Using PE-C100-LSZH Coax with HeatShrink, LF Solder. PE39022LF/HS is a FAKRA jack to N male cable using PE-C100-LSZH coax. This Pasternack FAKRA jack to N male cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm N for connector 2. Our jack FAKRA to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE39022LF/HS FAKRA jack to N male cable assembly is constructed with PE-C100-LSZH coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE39022/HS
D#: PE39022/HS
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
Microchip Technology Inc 
RECOM Power 
TE Connectivity 
Rochester Electronics 
Coilcraft Direct 
Master Electronics 
Flip Electronics 
Interstate Connecting Components 
Ameya Holding Limited 
Microchip USA 
Powell Electronics 
Richardson RFPD 
ComSIT USA 
Allelco Limited 
Time Way Electronics Limited 
Techni-Tool, Inc. 
North Star Micro Electronics 
TestEquity LLC 
DB Roberts 
Dynamic Solutions GmbH 
PUI 
Sager 
NAC 
Quest Components 
Bristol Electronics 
LIBRA Elektronik GmbH 
Rutronik 
Win Source Electronics 
Chip Stock 
EBV Elektronik 
Cytech Systems Limited 
Avnet Silica 
ACDS 
Avnet Abacus 
Sierra IC 
Vyrian 
Silitech Components Inc. 
New Advantage Corporation 
Pasternack Enterprises US 
ES Components 
Neutron USA 
Tedss 
Greenchips