|
PE35034LF/HS-12
D#: PE35034LF/HS-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: 4 Hole Flange, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to N Female 4 Hole Flange Cable 12 Inch Length Using RG400 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to N female 4 hole flange cable 12 inch length using RG400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to N female 4 hole flange cable 12 inch length using RG400 coax with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and type N 4 hole flange cable connection on the other. Our SMA to N type cable assemblies have a male gender on end 1 and female on end 2. PE35034LF/HS-12 can also be known as a SMA plug to N type jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE35034LF/HS-12 is built with RG400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency SMA male to type N female 4 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE35034LF/HS-12 can also be used in the other direction and will be type N female 4 hole flange to SMA male cable assembly if the opposite connectivity is required. SMA plug to N type jack 4 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to N type cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female 4 hole flange cable 12 inch length using RG400 coax with heatshrink, LF solder.
Min Qty:
1
Package Multiple:
1
|
2756
|
- 1 $141.9900
- 25 $134.8900
- 50 $127.7900
- 100 $122.1100
- Show All
|
Buy Now
|
|
PE33690/HS-12
D#: PE33690/HS-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMC, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMC Jack Bulkhead to SMC Plug Cable 12 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMC jack bulkhead to SMC plug cable 12 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMC jack bulkhead to SMC plug cable 12 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMC to SMC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMC bulkhead cable connection on one end and a SMC cable connection on the other. Our SMC to SMC cable assembly has a jack gender on end 1 and a plug on end 2. PE33690/HS-12 can also be known as a SMC female to SMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE33690/HS-12 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our bulkhead SMC jack to SMC plug cable has a maximum VSWR of 1.4:1. SMC female to SMC male cable assembly PE33690/HS-12 is built with RG316 which is a flexible coax type. The Pasternack flexible SMC cable assembly is manufactured with SMC to SMC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE33690/HS-12 can also be used in the other direction and will be a SMC plug to SMC jack bulkhead cable assembly if the opposite connectivity is required. SMC female bulkhead to SMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMC to SMC cable assembly for quick shipment worldwide. Variations of SMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMC to SMC RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
184
|
- 1 $52.9900
- 25 $50.3400
- 50 $47.6900
- 100 $45.5700
- Show All
|
Buy Now
|
|
PE3W08062/HS-12
D#: PE3W08062/HS-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to BNC Female Bulkhead Cable 12 Inch Length Using RG316-DS Coax with HeatShrink., Radio frequency assembly SMA male to BNC female bulkhead cable 12 inch length using RG316-DS coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to BNC female bulkhead cable 12 inch length using RG316-DS coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a BNC bulkhead cable connection on the other. Our SMA to BNC cable assembly has a male gender on end 1 and a female on end 2. PE3W08062/HS-12 can also be known as a SMA plug to BNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W08062/HS-12 RF cable has a FEP jacket of 0.114-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our SMA male to bulkhead BNC female cable has a maximum VSWR of 1.5:1. SMA plug to BNC jack cable assembly PE3W08062/HS-12 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the clamp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W08062/HS-12 can also be used in the other direction and will be a BNC female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to BNC RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
92
|
- 1 $70.9900
- 25 $67.4400
- 50 $63.8900
- 100 $61.0500
- Show All
|
Buy Now
|
|
PE3C4268LF/HS-12
D#: PE3C4268LF/HS-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: 10-32, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 10-32, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 10-32 Female to 10-32 Female Cable 12 Inch Length Using RG178 Coax with HeatShrink, LF Solder., Radio frequency assembly 10-32 female to 10-32 female cable 12 inch length using RG178 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 10-32 female to 10-32 female cable 12 inch length using RG178 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to 10-32 cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 10-32 cable connection on one end and 10-32 cable connection on the other. Our 10-32 to 10-32 cable assembly has female gender on end 1 and female on end 2. PE3C4268LF/HS-12 can also be known as a 10-32 jack to 10-32 jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.400 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 10-32 jack to 10-32 jack cable assembly PE3C4268LF/HS-12 is built with RG178 which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with 10-32 to 10-32 cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3C4268LF/HS-12 RF cable are available on our downloadable PDF datasheet. 10-32 jack to 10-32 jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to 10-32 cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal 10-32 RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
48
|
- 1 $159.9900
- 25 $151.9900
- 50 $143.9900
- 100 $137.5900
- Show All
|
Buy Now
|
|
PE3W07374/HS-12
D#: PE3W07374/HS-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: Mini SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm Mini SMB Plug to 75 Ohm N Male Cable 12 Inch Length Using 75 Ohm RG59 Coax with HeatShrink., Radio frequency assembly 75 Ohm mini SMB plug to 75 Ohm N male cable 12 inch length using 75 Ohm RG59 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm mini SMB plug to 75 Ohm N male cable 12 inch length using 75 Ohm RG59 coax with heatshrink, mini SMB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMB to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMB cable connection on one end and type N cable connection on the other. Our mini SMB to type N cable assemblies have a plug gender on end 1 and male on end 2. PE3W07374/HS-12 can also be known as a mini SMB male to type N plug cable assembly and will be shipped same-day as it is purchased. Mini SMB male to type N plug cable assembly PE3W07374/HS-12 is built with RG59 which is a flexible coax type. The Pasternack flexible Mini SMB cable assembly is manufactured with mini SMB to N type cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this mini SMB plug to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07374/HS-12 can also be used in the other direction and will be type N male to mini SMB plug cable assembly if the opposite connectivity is required. Mini SMB male to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMB to N type cable assembly for quick shipment worldwide. Variations of mini SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm mini SMB plug to 75 Ohm N male cable 12 inch length using 75 Ohm RG59 coax with heatshrink.
Min Qty:
1
Package Multiple:
1
|
41
|
- 1 $149.9900
- 25 $142.4900
- 50 $134.9900
- 100 $128.9900
- Show All
|
Buy Now
|
|
PE3W02447/HS-12
D#: PE3W02447/HS-12
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length: 12 inches. N Male Right Angle to N Female Cable 12 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male right angle to N female cable 12 inch length using LMR-600 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male right angle to N female cable 12 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and type N cable connection on the other. Our low loss right angle N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to N type cable is a male to female coax assembly, PE3W02447/HS-12, can also be known as a low loss right angle type N plug to N type jack cable assembly and will be shipped same-day as it is purchased. Type N plug to type N jack cable assembly PE3W02447/HS-12 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency N type right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02447/HS-12 can also be used in the other direction and will be type N female to right angle N type male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female cable 12 inch length using LMR-600 coax with heatshrink.
Min Qty:
1
Package Multiple:
1
|
32
|
- 1 $263.9900
- 25 $250.7900
- 50 $237.5900
|
Buy Now
|
|
PE3W10208/HS-12
D#: PE3W10208/HS-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MMCX Plug Right Angle to SSMC Jack Bulkhead Cable 12 Inch Length Using PE-SR405FLJ Coax with HeatShrink., Radio frequency assembly MMCX plug right angle to SSMC jack bulkhead cable 12 inch length using PE-SR405FLJ coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to SSMC jack bulkhead cable 12 inch length using PE-SR405FLJ coax with heatshrink, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and SSMC bulkhead cable connection on the other. Our right angle MMCX to SSMC cable assemblies have a plug gender on end 1 and jack on end 2. PE3W10208/HS-12 can also be known as a right angle MMCX male to SSMC female cable assembly and will be shipped same-day as it is purchased. MMCX male to SSMC female cable assembly PE3W10208/HS-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable MMCX cable assembly is manufactured with right angle MMCX to SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to SSMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10208/HS-12 can also be used in the other direction and will be SSMC jack bulkhead to right angle MMCX plug cable assembly if the opposite connectivity is required. MMCX right angle male to SSMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to SSMC cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to SSMC jack bulkhead cable 12 inch length using PE-SR405FLJ coax with heatshrink.
Min Qty:
1
Package Multiple:
1
|
26
|
- 1 $101.9900
- 25 $96.8900
- 50 $91.7900
- 100 $87.7100
- Show All
|
Buy Now
|
|
PE3C8083/HS-12
D#: PE3C8083/HS-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Mini SMP Female Right Angle to SMA Male Right Angle Cable 12 Inch Length Using PE-P047 Coax with HeatShrink., Radio frequency assembly mini SMP female right angle to SMA male right angle cable 12 inch length using PE-P047 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA male right angle cable 12 inch length using PE-P047 coax with heatshrink, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and right angle SMA cable connection on the other. Our right angle mini SMP to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. PE3C8083/HS-12 can also be known as a right angle mini SMP jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA plug cable assembly PE3C8083/HS-12 is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10 GHz maximum frequency mini SMP right angle female to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8083/HS-12 can also be used in the other direction and will be right angle SMA male to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA male right angle cable 12 inch length using PE-P047 coax with heatshrink.
Min Qty:
1
Package Multiple:
1
|
19
|
- 1 $259.9900
- 25 $246.9900
- 50 $233.9900
- 100 $223.5900
- Show All
|
Buy Now
|
|
PE3W09105/HS-12
D#: PE3W09105/HS-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male to SSMA Female Cable 12 Inch Length Using RG196 Coax with HeatShrink., Radio frequency assembly BNC male to SSMA female cable 12 inch length using RG196 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to SSMA female cable 12 inch length using RG196 coax with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SSMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and SSMA cable connection on the other. Our BNC to SSMA cable assemblies have a male gender on end 1 and female on end 2. PE3W09105/HS-12 can also be known as a BNC plug to SSMA jack cable assembly and will be shipped same-day as it is purchased. BNC plug to SSMA jack cable assembly PE3W09105/HS-12 is built with RG196 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SSMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to SSMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09105/HS-12 can also be used in the other direction and will be SSMA female to BNC male cable assembly if the opposite connectivity is required. BNC plug to SSMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SSMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SSMA female cable 12 inch length using RG196 coax with heatshrink.
Min Qty:
1
Package Multiple:
1
|
6
|
- 1 $159.9900
- 25 $151.9900
- 50 $143.9900
- 100 $137.5900
- Show All
|
Buy Now
|
|
PE3W02799/HS-12
D#: PE3W02799/HS-12
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: Banana, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 2 Series: SHV, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Banana Plug to SHV Jack Bulkhead Cable 12 Inch Length Using RG223 Coax with HeatShrink., Radio frequency assembly banana plug to SHV jack bulkhead cable 12 inch length using RG223 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Banana plug to SHV jack bulkhead cable 12 inch length using RG223 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom banana to SHV cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with banana cable connection on one end and SHV bulkhead cable connection on the other. Our banana to SHV cable assembly has plug gender on end 1 and jack on end 2. PE3W02799/HS-12 can also be known as a banana male to SHV female cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper as cable inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Banana male to SHV female cable assembly PE3W02799/HS-12 is built with RG223 which is a flexible coax type. The Pasternack flexible Banana cable assembly is manufactured with banana to SHV cable connectors, has a impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has clamp/solder attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3W02799/HS-12 RF cable are available on our downloadable PDF datasheet.PE3W02799/HS-12 can also be used in the other direction and will be SHV jack bulkhead to banana plug cable assembly if the opposite connectivity is required. Banana male to SHV female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality banana to SHV cable assembly for quick shipment worldwide. Variations of banana cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal Banana RF cable assembly as per your requirements.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $149.9900
- 25 $142.4900
- 50 $134.9900
- 100 $128.9900
- Show All
|
Buy Now
|
Microchip Technology Inc 
RECOM Power 
Rochester Electronics 
TE Connectivity 
SiTime Corporation 
Coilcraft Direct 
Master Electronics 
Flip Electronics 
Time Way Electronics Limited 
Richardson RFPD 
L-com US 
ChipNobo Co., Limited 
ICProFast Technology 
Ameya Holding Limited 
CDM Electronics 
Blume Elektronik Distribution GmbH 
Interstate Connecting Components 
Component Solutions, Inc. 
TestEquity LLC 
Commodity Components Intl 
ICMILES Electronics Ltd 
Sensible Micro Corporation 
Allelco Limited 
ComSIT USA 
Kurrent Technology 
PUI 
Axis Part Limited 
Bisco Industries 
ANDE Electronics 
Techni-Tool, Inc. 
Component Search 
Powell Electronics 
NAC 
West Coast Components Inc. 
Bristol Electronics 
Tencell 
Dynamic Solutions GmbH 
Velocity Electronics 
Component Stockers 
Chip-Germany GmbH 
North Star Micro Electronics 
PEI Genesis 
C Plus Electronics 
Quest Components 
DB Roberts 
Sager 
Kepictronics Inc. 
Microchip USA 
MountainView Components Inc. 
Venkel Ltd. 
Karl Kruse GmbH & Co KG 
ES Components 
IC Components Limited 
Perfect Parts Corporation 
Win Source Electronics 
Greenchips 
LIBRA Elektronik GmbH 
JRH Electronics 
Metaverse IC Inc. 
Opulent Electronics Inc. 
Tedss 
Utmel Electronic 
ICHOT TECHNOLOGY LIMITED 
CXDA Electronics 
Shengyu Electronics Technology Limited 
Rutronik 
Unicom Electronics 
Chip Stock 
Avnet Abacus 
Braemac Americas-Symmetry 
Sense Electronic Company Limited 
Avnet Silica 
AMH Components Ltd 
New Advantage Corporation 
Silitech Components Inc. 
ACDS 
J2 Sourcing 
YIC International Co., Limited 
Chips Pulse Industry Limited 
Cytech Systems Limited 
EBV Elektronik 
Vyrian 
LCSC 
Futuretech Components Ltd 
SEMIX 
Neutron USA 
Pasternack Enterprises US 
R&J Components 
New Strength Electronic Co., Limited 
Sierra IC 
NexGen Digital