|
PE15A1028
D#: PE15A1028
|
Pasternack Enterprises
|
Key Specifications, Gain: 40 dB, Power Output: 12 dBm P1dB, Frequency, Min: 1.2 GHz, Frequency, Max: 1.6 GHz, Noise Figure, Max: 0.8 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 120 mA, Connector Series: SMA. 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA. PE15A1028 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 1.2 GHz and maximum frequency of 1.6 GHz. The significantly low noise figure of this radio frequency amplifier is 0.8 dB with a typical gain of 40 dB. LNA amplifier PE15A1028 is rated at 15 Volts DC maximum and 120 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.
Min Qty:
1
Package Multiple:
1
|
7
|
- 1 $895.0000
- 5 $859.2000
- 10 $823.4000
|
Buy Now
|
|
PEANFP1028
D#: PEANFP1028
|
Pasternack Enterprises
|
Key Specifications. Antenna Type Flat Panel Polarization RHCP Minimum Frequency 902 MHz Maximum Frequency 928 MHz Connector 1 Polarity Reverse Polarity Connector Series TNC Connector Gender Male Impedance 50 Ohm Maximum Input VSWR 1.3:1, Pasternack's PEANFP1028 is a Directional RFID flat panel RHCP antenna. The PEANFP1028 with a 10 dBi gain nominal is a Directional antenna. Our 902-928 MHz RP TNC male connector, flat panel antenna has a gain of 10 dBi. With an impedance of 50 Ohms and max input power of 20 Watts, the PEANFP1028 RFID flat panel is well suited for Radio Frequency Identification tag reading applications. Contact Pasternack's antenna experts for any assistance on 902-928 MHz, 10 dBi RP TNC male connector antennas. This 10 dBi gain RFID antenna is highly directional providing the reader radio the capabilities of simultaneously reading a multitude of RFID tags with a high degree of accuracy. Pasternack's RFID PEANFP1028 has a radome made of PVC in White color and comes from a facility certified to ISO 9001:2015. This Reverse Polarity TNC connectized Antenna has an overall length of 18 in, width of 6 in, and weighs 2.42 lbs. Use our on-line ordering system to purchase your PEANFP1028 RFID Directional RHCP antenna 24 hours a day with same-day shipping and no MOQs (minimum order quantities).
Min Qty:
1
Package Multiple:
1
|
11
|
- 1 $165.9900
- 25 $157.6900
- 50 $149.3900
- 100 $142.7500
- Show All
|
Buy Now
|
|
PE1V31028
D#: PE1V31028
|
Pasternack Enterprises
|
Min Qty:
1
Package Multiple:
1
|
3
|
- 1 $525.0000
- 10 $504.0000
- 25 $483.0000
- 100 $462.0000
- Show All
|
Buy Now
|
|
PE3C1028/HS-300
D#: PE3C1028/HS-300
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to N Male Right Angle Low Loss Cable 300 Inch Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 300 inch length using LMR-400-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 300 inch length using LMR-400-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE3C1028/HS-300 can also be known as a low loss N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C1028/HS-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1028/HS-300 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 300 inch length using LMR-400-UF coax with heatshrink.
Min Qty:
1
Package Multiple:
1
|
430
|
- 1 $177.9900
- 25 $169.0900
- 50 $160.1900
- 100 $153.0700
- Show All
|
Buy Now
|
|
PE3W10282LF/HS
D#: PE3W10282LF/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Male to QMA Male Cable Using RG58 Coax with HeatShrink, LF Solder. PE3W10282LF/HS is a N male to QMA male cable using RG58 coax. This Pasternack N male to QMA male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm QMA for connector 2. Our male N to male QMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10282LF/HS N male to QMA male cable assembly is constructed with RG58 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE3W10288/HS
D#: PE3W10288/HS
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Male Cable Using RG142 Coax with HeatShrink. PE3W10288/HS is a N female bulkhead to N male cable using RG142 coax. This Pasternack N female bulkhead to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N bulkhead to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W10288/HS N female bulkhead to N male cable assembly is constructed with RG142 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
|
Buy Now
|
|
PE73SP1028
D#: PE73SP1028
|
Pasternack Enterprises
|
Key Specifications, Impedance: 50 Ohm, Connector In Series: N, Connector In Gender: Male, Connector Out Series: N, Connector Out Gender: Female, Minimum Frequency: 125 MHz, Maximum Frequency: 1 GHz, Maximum Input Power: 375 Watts, Direction: Directional, Throughput Energy: 3,500 uJ. Type N M/F In/Out Bulkhead Coax RF Surge Protector, 125MHz - 1GHz, DC Block, 375W, 20kA, Blocking Cap and Gas Tube., RF coaxial surge protector (sometimes referred to as a lightning arrestor or surge suppressor) PE73SP1028 from Pasternack is in-stock and will ship same business day as it is purchased. This radio frequency coax surge protector suppressor protects against high electromagnetic pulses (EMP) / power surges that are typically caused by lightning or severe electrical changes. Our Type N M/F in/out bulkhead coax RF surge protector, 125MHz - 1GHz, DC block, 375W, 20kA, blocking cap and gas tube is typically used with a RF system of one or more components exposed to the outdoors, like an antenna. The coaxial lightning surge arrestor is designed to pass through the desired frequency range while protecting the RF equipment from DC surges. This Pasternack coax surge protector PE73SP1028 is 50 Ohm and has a N type input. The 50 Ohm type N surge protector is a male gender for input and type N in female for output. Our type N M/F surge protectors utilize blocking cap and gas tube protection technology. The frequency range of this blocking cap and gas tube type N M/F lightning surge arrestor is 125 MHz to 1 GHz. Power handling maximum of PE73SP1028 is 375 W. The Pasternack 375 Watts N type bulkhead surge suppressor is rated at 3500 uJ let-through. This coax lightning protection component has a 600 maximum voltage. Additional product specs and CAD drawing with dimensions for this male to female type N surge protector from Pasternack can be found in the details of the specifications datasheet PDF on this page. Pasternack is a supplier of one of the broadest and deepest inventory of RF, microwave and millimeter wave components available for shipping same business day. Our ISO 9001:2008 registered facilities will ship the coaxial surge protector components from stock the business day of your purchase. Expert technical support and a friendly, knowledgeable sales team are here to help you with your RF requirements. These and many other reasons are why Pasternack is one of the best websites where to find and buy coaxial type N bulkhead surge protector products.
Min Qty:
1
Package Multiple:
1
|
7
|
- 1 $103.9900
- 25 $98.7900
- 50 $93.5900
- 100 $89.4300
- Show All
|
Buy Now
|
|
PE3C1028-300
D#: PE3C1028-300
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. N Male to N Male Right Angle Low Loss Cable 300 Inch Length Using LMR-400-UF Coax., Radio frequency assembly N male to N male right angle low loss cable 300 inch length using LMR-400-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 300 inch length using LMR-400-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1028-300 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C1028-300 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1028-300 can also be used in the other direction and will be right angle N type male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 300 inch length using LMR-400-UF coax.
Min Qty:
1
Package Multiple:
1
|
430
|
- 1 $159.9900
- 25 $151.9900
- 50 $143.9900
- 100 $137.5900
- Show All
|
Buy Now
|
|
PE3W10285-48
D#: PE3W10285-48
|
Pasternack Enterprises
|
Key Specifications, Connector 1 Series: FME, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. FME Jack to N Male Cable 48 Inch Length Using RG58 Coax., Radio frequency assembly FME jack to N male cable 48 inch length using RG58 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The FME jack to N male cable 48 inch length using RG58 coax, FME cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and type N cable connection on the other. Our FME to N type cable assemblies have a jack gender on end 1 and male on end 2. PE3W10285-48 can also be known as a FME female to type N plug cable assembly and will be shipped same-day as it is purchased. FME female to type N plug cable assembly PE3W10285-48 is built with RG58 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W10285-48 can also be used in the other direction and will be N type male to FME jack cable assembly if the opposite connectivity is required. FME female to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to type N cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to N male cable 48 inch length using RG58 coax.
Min Qty:
1
Package Multiple:
1
|
0
|
- 1 $70.9900
- 25 $67.4400
- 50 $63.8900
- 100 $61.0500
- Show All
|
Buy Now
|
|
PE3CA1028-12
D#: PE3CA1028-12
|
Pasternack Enterprises
|
Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.1, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to UMCX 2.1 Plug Cable 12 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly SMA male to UMCX 2.1 plug cable 12 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to UMCX 2.1 plug cable 12 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.1 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and UMCX 2.1 cable connection on the other. Our SMA to UMCX 2.1 cable assemblies have a male gender on end 1 and plug on end 2. This SMA to UMCX 2.1 cable is a male to plug coax assembly, PE3CA1028-12, can also be known as a SMA plug to UMCX 2.1 male cable assembly and will be shipped same-day as it is purchased. SMA plug to UMCX 2.1 male cable assembly PE3CA1028-12 is built with 0.81mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX 2.1 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to UMCX 2.1 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1028-12 can also be used in the other direction and will be UMCX 2.1 plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to UMCX 2.1 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.1 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to UMCX 2.1 plug cable 12 inch length using 0.81mm coax, RoHS.
Min Qty:
1
Package Multiple:
1
|
8
|
- 1 $19.1900
- 25 $18.2300
- 50 $17.2700
- 100 $16.5000
- Show All
|
Buy Now
|
Microchip Technology Inc 
Rochester Electronics 
Microchip USA 
Master Electronics 
Flip Electronics 
Bisco Industries 
IC-Online 
Direct Components, Inc. 
Component Stockers 
Sensible Micro Corporation 
DB Roberts 
Quotebeam 
Jameco Electronics 
ComSIT USA 
Inventory Management Partners 
Fairview Microwave 
Acme Chip Technology Co.,Limited 
Commodity Components Intl 
Quest Components 
Ersa Electronics 
VRG Components Inc 
Karmiel Tech 
Weyland Group Limited 
Interstate Connecting Components 
PEI Genesis 
CDM Electronics 
Sager 
C Plus Electronics 
Renesas Electronics America 
Chip-Germany GmbH 
TestEquity LLC 
Power and Signal Group 
Ampheo Electronics 
Velocity Electronics 
Tencell 
Powell Electronics 
Kepictronics Inc. 
West Coast Components Inc. 
NAC 
L-com US 
PUI 
Bristol Electronics 
Techni-Tool, Inc. 
Dynamic Solutions GmbH 
Richardson RFPD 
YIC International Co., Limited 
Unibetter Technology Co., Ltd 
LCSC 
Rutronik 
OMO Electronic Limited 
GlobalTek Components 
Unicom Electronics 
New Advantage Corporation 
Venkel Ltd. 
Futuretech Components Ltd 
Neutron USA 
HS IC Trading GmbH 
LIBRA Elektronik GmbH 
UK Serfala 
Shengyu Electronics Technology Limited 
Smart Pioneer Electronic Co.,Limited 
Ample Chip Limited 
CXDA Electronics 
Avnet Silica 
Greenchips 
Semtke Electronic Company Limited 
Wenorca Kash 
Silitech Components Inc. 
DGT Technology (HK) Co., Limited 
Suntronic Electronics Co 
Chip Digger Limited 
ICHOT TECHNOLOGY LIMITED 
R&J Components 
AMH Components Ltd 
North Star Micro Electronics 
Perfect Parts Corporation 
ICSOSO Electronics 
E-RIZE CO., LTD 
Symmetry Electronics 
South Electronics 
Heisener Electronics 
Hong Kong Hongxinwei Technology Co., Ltd. 
Pasternack Enterprises US 
ACDS 
Win Source Electronics 
EBV Elektronik 
IC Components Limited 
Cytech Systems Limited 
NexGen Digital
Avnet Abacus 
ES Components 
Briocean Technology Co.,Ltd. 
Sense Electronic Company Limited 
J2 Sourcing 
RX Electronics Limited 
New Strength Electronic Co., Limited 
Shenzhen Zhongkaixin Micro Electronics Co., Ltd. 
HK DCY Technology Limited 
Opulent Electronics Inc. 
Sierra IC 
Metaverse IC Inc. 
Vyrian 
Karl Kruse GmbH & Co KG 
MountainView Components Inc. 
Tedss 
LIXINC Electronics Co Limited 
Chip Stock 
CJJ HK TECHNOLOGY LIMITED 
Quarktwin Technology